Intelligent Interactive Conference Panel User Manual Introduction Introduction Warning Warning Packing list Packing list Power on Start Power off Writing Setting 1. Fluent writing 2. Easy share Front interfaces Input interfaces Interface introduction Common port connection 3. Wireless projection 4.
Contents I Product introduction ............................................................. 1 II Warning ................................................................................. 2 III Packing list .......................................................................... 5 IV Start ..................................................................................... 8 4.1 Attions before power on ............................................ 5 4.2 Power off .....................................
5.5 Setting ...................................................................... 22 5.5.1 WIFI ................................................................. 23 5.5.2 Wireless hotsport .............................................. 23 5.5.3 Wired network .................................................. 24 5.5.4 Bluetooth .......................................................... 24 5.5.5 Desktop ............................................................. 25 5.5.6 Language & Input ..................
I Product introduction Welcome to the intelligent interactive conference panel. Designed for modern conference rooms, this product offers smooth writing, easy erasing, and screencasting. Built-in multi-screen interactive features will make your meeting work fun and convenient.
II Warning Please read the instructions carefully before using the machine. Please keep it in case you need it when you need it. Do not place the machine where it is not stable, easy to tilt or fall. Do not insert anything into the inside of the machine. Prohibition Prohibition Do not place the machine in an area where it can accumulate dust. May cause a fire. Do not place or store flammable substances around the machine. Inadvertent handling of flammable substances can cause fires.
Be sure to connect the power cable to ground current. (Ungrounded equipment may cause death or injury due to electric shock) Fully secure the power cable. If the power cable is not fully seated, the machine may catch fire. Prohibition Prohibition Unplug the power cord when no one is in use indoors or when it is not used for a long time. Do not touch the power plug when your hands are wet. Excessive humidity may cause a person to be electrocuted to death.
Disclaimer The warranty obligation is not covered by the warranty period when one of the following conditions occurs.
III Packing list The following materials are accessories for the conference intelligent interactive panel. # Name Quantity USB computer wireless 1 1 projection kit 2 Power cable 1 3 Whiteboard pen 1 4 WIFI antenna 4 5 Wireless remote (option) 1 6 OPS (option) 1 IV Start 4.
Power input interface Power switch button Please plug in the power cord. At this time, the indicator light on the front frame of the machine will light up, and the red color will indicate standby status. Press the power button on the front frame and the indicator will change from red to blue and the machine will start. 4.2 Power off 4.2.1 Standby In any case, short press the power button to enter hibernation, long press to enter the shutdown.
4.2.2 Press power button off In the case of abnormal machine, you can directly pull out the power cord to turn off the power of the whole machine and forcibly turn off the power. This is not recommended for models with built-in OPS computers and may damage the computer system. 4.3 Conference documents The meeting minutes, introduction materials and other documents are in the Documents folder of the local directory, as shown in the image.
V Main interface introduction When booting, the machine will default to the system desktop as above. Some models with an OPS built-in computer will default to the OPS computer interface when the machine boots. At this point, you can directly operate the OPS computer. If you need to return to the main interface, you can return it by operating the sidebar shortcut menu. 5.1 Side shortkey menu Click to switch channels. The shortcut menu is shown below.
* The machine supports automatic signal detection. When an external signal is inserted, the machine will automatically detect it and display it on the icon. Screen saver: Select the screen saver icon in the app, and the system will automatically play the built-in default screen saver image.
In the application, select the welcome chart, click, and then enter the welcome template selection interface. After selecting any template, double-click any text in the template to enter the editable mode. When finished, click play. Text can be changed freely. Writing: Click on the writing icon to enter the writing pad. Just like the icon on the home page. Transfer screen: Click the screen icon to enter the screen guide interface.
1. The welcome program will load the welcome template for the corresponding language through the current locale. 2. If the welcome template is loaded, after switching the language, you want to switch to the corresponding language welcome template. Need to do the following: Go to Settings Center - Application Management - Welcome Word - Clear Data Open the welcome program again to switch to the welcome template for the current locale.
Click to hide sidebar shortcut menu 5.2 More Click into Android icon interface 5.
After connecting to the network system, it will be automatically registered. The registration time will be about five to six seconds.
Click to pop up the secondary menu to set the pen size, color, and background color. Enter the writing mode as shown below. Press and hold the lower left corner of the tablet to display the selection menu, which can be switched between simple mode and professional mode.
5.3.
T1: The default click is the sketch board (can be customized in the settings), double-click to take a screenshot (can be customized in the settings), long press to shut down.
performs the blackboard rubbing function. In the writing mode, you can click the corresponding icon to cancel or redo. Click the eraser icon and the system switches to eraser mode. At this point, any touch screen is an eraser. You need to click the write icon when you need to write. This eraser option is not recommended for customers and is limited to situations where you are not used to using gestures.
5.3.
This icon indicates the total number of pages and current page number in the current writing mode 5.3.5 Save Click to select the save mode. There are 3 modes to choose from, save the local, save the mailbox, and send it to the phone. Click to save it to the local space as a picture, and the file is in the Documents folder of the local directory.
Click , a QR code will be generated for the written handwriting for the phone to scan for download. Internet options determine whether the QR code is a WAN link or a local hotspot link. If it is a local hotspot link, then the mobile phone must be connected to the hotspot emitted by the machine to scan and download. If it is a WAN link, the machine must be connected to the Internet, and the phone can be connected to the Internet (only WeChat is supported).
5.3.6 Exit writing When you save the file, you can exit the writing mode with this icon. 5.3.7 Annotation mode When you are browsing a picture, playing a video, opening an Office document, and viewing an external channel with a signal, clicking the icon automatically enter the annotation mode. it will Long press this annotation icon to quickly enter the tablet. 5.4 File The system comes standard with the file browser.
5.5 Setting Click the icon to enter the setup menu. On this page, you can set the network, language, and other settings.
5.5.1 WIFI Displays the currently available WIFI signal for connection. 5.5.2 Wireless hotspot To open the wireless hotspot, click on “Wireless Wi-Fi Hotspot” in the Settings Center to open the hotspot. The system will turn on the hotspot to 5G by default.
Wireless hotspots are available with 2.4G and 5G frequencies. Try to use 5G hotspots when transferring screens, which can improve transmission efficiency. 5.5.3 Wired network Once wired, wireless will automatically disconnect. In the absence of a wired network, a machine-built hotspot can be used for portable devices to make WIFI connections. 5.5.
Click the Bluetooth output switch, slide to the right to open Bluetooth, and click Add Accessory to search for Bluetooth. After searching for a Bluetooth device, click on the corresponding Bluetooth device name to link the Bluetooth device for audio playback. 5.5.5 Desktop On the theme page, you can choose your own desktop wallpaper, etc.
5.5.6 Language & Input Users can choose the system language and install their favorite input method and set it here.
5.5.
The left side can be added to the floating navigation app, the right side is the added navigation app, and up to 6 apps can be added. 5.5.8 Security and privacy Click the Security and Privacy button in the Settings Center to turn on the power-on password lock feature. The first time you need to set the power-on password.
The power-on password is an 8-digit alphanumeric password. After booting and restarting, it will enter the power-on password interface first.
VI Configuration instruction There are a variety of configurations for the whole machine, please refer to the actual product. 6.1 Standard configuration 1. Front input port 2. The side input port on the back of the machine 3.
6.2 Touch output When the machine receives an HDMI or VGA signal from an external computer, the machine's touch control signals can be output from this "touch out" port, which the user can connect to the computer using a USB cable. After that, the user can operate the computer from the screen of the machine.
VII Computer application 7.1 Built-in (option) Click the home icon to enter the OPS computer. At this point, the shortcut menu on the right side is in a collapsed hidden state, and the touch can operate the computer. Click the left triangle icon on the right side of the screen to bring up the shortcut menu on the right.
At this point, the touch focus is on the sidebar, and the touch is not passed to the built-in computer. If you need to continue to operate the built-in computer, you need to click the right triangle icon in the shortcut menu of the sidebar to hide the shortcut menu, then the touch focus will fall on the built-in computer. VIII Multi-screen interaction 8.1 Computer interaction This feature is limited to models that support USB wireless transmission. Make sure the 5G hotspot is turned on.
New USB wireless screen adapter adaptation steps: Insert the USB wireless screen transmitter into the conference machine's USB port, the screen will appear to start the configuration program, about 5 seconds will be configured successfully. After the configuration is successful, the screen is successfully configured. Please remove wirelessMedir. If the wireless transmitter cannot be connected to the TV, the currently used 5G channel may be interfered by other nearby devices.
It can be handled in the following ways. 1. Set the “channel” in the machine hotspot setting to other channels with a larger span, such as 161 (default 36) The following table shows the status of the 5G channel currently supported by the machine and the common country support, which can be set by the user.
Open the desktop icon into following interface.
icon, you can use Android mobile phone screen, mobile phone Android system 5.0 or above support mobile screen projection due to mobile phone permissions to limit the video playback is no sound output, Android system below 5.0 only support Share within ESHare. Make sure the mobile device and the large screen are connected to the same network.
connect to the big screen 38
8.2.2. Projection and annotation Click to cast the mobile device to the conference machine with the electronic whiteboard. 8.3 iPhone mobile projection 1. First, the mobile phone supports 5G WIFI mode (only supports 5G mode). 2. Turn on the machine to connect to Wifi, then open the phone to connect to the local hotspot. 3. Select Airplay from the bottom.
Click to connect the corresponding USB wireless transmission to transfer pictures, music and videos.
ios and Android dual screen PC and ios dual screen 41
IX Maintenance Cleaning can make the machine look new. Please remove the power plug before cleaning and maintenance to prevent electric shock. Cleaning screen Use a soft cloth to apply special cleaning or alcohol. Wipe the screen of the machine with a cloth. Pay attention to the soft cloth when wiping. Do not stick too much alcohol to avoid flowing into the machine. Cleaning face frame Please wipe the front frame with a dry, soft, lint-free cloth.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver.
