Product Introduction & User Instructions Kapture KP1-D7 (KP1-D791, KP1-D7P1) Smart Home Lock With Mechanical Key Kapture KP1-LINK (Optional) 05/2020 Agenda Product Features 1 Operation Modes 1 Common Functions 2 Keypad Programming Mode 3 Stand-Alone Mode 3 Link Mode 4 Detailed Function Description 4 First time to power up 4 Battery change 4 Access the lock via the keypad code 5 Lock/Unlock UI 5 Privacy Mode 5 Low Battery Level 6 Keypad Programming Commands 6 Reset the lock 7 K
Lock Firmware Update 14 Install/Remove LINK 14 Real-time notification 14 Upgrade LINK Firmware 15 FCC Statement 16 NCC Statement 16 Product Features Included In The Box (Smart Lock) ● A Smart Lock ● 4 AA Batteries ● A Deadbolt ● Mounting Hardware ● Installation Guide (Hardware) ● User Manual Available Colors ● Matt Black ● Satin Nickel Included In The Box (Link) ● A wifi bridge adapter ● Installation Guide Operation Modes The Kapture lock can function on one of the three modes mentioned below.
○ ○ Under Stand-Alone mode, and if connecting the Kapture lock to a Kapture Link, the lock will be capable of providing the remote control management. Not only the real-time events can pop-up on the Kapture app but also an alert notification will receive immediately on the app. Both master and family can remotely access the lock. Voice assistant: You can access a registered lock through Amazon Alexa or Google Assistant. Common Functions ➔ Users can access the lock via the physical kay or keypad.
Keypad Programming Mode Requires: None Key Features : ➔ Keypad Programming Mode is the default operating mode. ➔ This mode allows users to use the keypad, setting the lock with a Master code. (See Keypad Programming Commands). Stand-Alone Mode Requires : ● A Smart Phone With Bluetooth Capability (iOS, Android Supported) and internet access. ● Install the Kapture app and register a Kapture Cloud account. Key Features : ➔ Equipped with Bluetooth 5.
Link Mode Requires : ● A Smart Phone With Bluetooth Capability (iOS, Android Supported) and internet access. ● Install the Kapture app and register a Kapture Cloud account. ● A Kapture LINK ● A Wifi AP Key Features : ➔ Setting via a button, easy to install and remove. ➔ Each link can pair to a Kapture lock. After pairing the Link to the lock via the Kapture app, it will upgrades the lock from Stand-Alone Mode to Link Mode. ➔ All the functions in Stand-Alone Mode are equipped. ➔ Equipped with Bluetooth 5.
● ● ● The latch extends first when reconnecting the batteries with the lock unlocked. In Stand-Alone Mode : ○ After battery change, you need to access the lock via the Kapture app to restart the audit trail. ○ A battery change will be recorded in the audit trail. In Link Mode : ○ After battery change, you need to access the lock via the Kapture app to restart the audit trail. ○ A battery change will be recorded in the audit trail.
● ● ● ● ● ● Short press the privacy button, and there are two statuses that can tell out from the lit led. ○ Red LED flash x 2 - Privacy mode on ○ Green LED flash x 2 - Privacy mode off Long press the privacy button for 5 seconds, and there are two statuses that can tell out from the lit led. ○ Red LED flash x 2 + Beep x 2 tells the Privacy Mod is activated. ○ Green LED flash x 2 + Beep x 2 tells the Privacy Mode is closed. The Privacy Mode will be closed if the lock is opened via ways or re-power on.
Set Auto-Lock delay Set Buzzer volume Set Lock out params 10 seconds 20 level 40 41 ○ ○ ○ ○ ○ ○ ○ seconds=00: off seconds=10 ~ 99 : on Default 10 secs Level = 0 : off Level = 1~3 : on, low/medium/high Default 2 40: turn off the lockout 41: turn on lockout (default is on) To operate all the above settings need the lock to be unlocked. The lock exit the setting mode when the settings have changed. Auto-lock is suspended In the Keypad Programming mode, and it will restart when quitting the mode.
● In Link Mode : ○ An audit trail remains. ○ A real-time alert will be sent to the Owner’s and Family’s app. Lock Out ● ● ● ● ● When locking out, the keypad panel is out of function and the Led keeps flashing slowly every 5 seconds. No the other functions to the lock will be affected. A lockout will be removed when successfully access the lock by any method. Three-stage of the lockout: ○ Stage 1: Three failed attempts lead to 3 minutes lockout.
○ ○ ○ ○ The latch does not extend thoroughly when user access via the keypad code or the app. ■ Exterior Led beeps and flashes in red three times. ■ The app shows the lock jammed icon. ■ An alert is sent. The latch does not retract thoroughly when user access via the keypad code or the app. ■ Exterior Led beeps and flashes in red three times. ■ The app shows the lock jammed icon. ■ An alert is sent. Access by keypad code when the latch retracted. ■ Exterior Led beeps and flashes in red twice.
● ● ● A lock can be paired to a Kapture Cloud account. And the account will be the Owner to the lock. To change the Owner, please reset the lock and pair it to another new account. The former Owner account will no longer access the lock via the app and removal to the lock is recommended. The Link needs to re-pair as well if you have one. After completing the pairing, a Bluetooth icon will pop up on the app to the lock you set.
■ ■ ■ ■ ○ Guest ■ ■ ■ ■ Able to check the audit trail. Able to revise the lock settings and the keypad code. Able to access the lock at any time when near the lock. In LINK Mode : ● Able to receive a real-time alert/notification. ● Able to access the lock remotely. Invited by Owner/Family. Able to set the volume to the lock. Given a specific keypad code. Able to access the lock with an invitee-given time limitation when near the lock.
● ● ● ● ● An invitation accompanied a keypad code. Different operation modes deal with the keypad code differently. ○ Stand-Alone Mode: ■ When invited, a 4-7 digits keypad code, called Master code to Owner, needs to be set when the invitee’s app is in connect with the lock via the Bluetooth. The keypad code can be the same as others(Family or Owner). ■ Guest is not allowed to set the keypad code.
4 Unlock Manually at by 5 Lock by keypad at 6 Unlock by keypad at by 7 Lock by privacy mode on at 8 Lock remotely by App at by 9 Unlock remotely by App at by 10 New Invitation to by 11 Invitation accepted by 12 Invitation to removed by 13 Lock setting ch
Lock Firmware Update ● ● You can use the Kapture App to update the lock firmware and check if the latest version exists through Kapture Cloud. The app is able to update the lock firmware when the smartphone is in connect with the lock via the Bluetooth. Please make sure the smartphone is close enough to the lock and leave before ensuring a successful update message shown on the app when updating the lock firmware.
● Owner and Family can subscribe to the push notification which is interested. Below are the push notifications that we provide. Please note that the Security Alert cannot be disabled due to its significance.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
NCC Statement 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變 更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時, 應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通 信或工業、科學及醫療用電波輻射性電機設備之干擾。 17