Users Manual Part 1

KE1-LNP5C INSTALLATION INSTRUCTION
INSTALLING THE LOCK ASSEMBLIES
A. Choose handle direction
Interior assembly
Exterior assembliy
Button
Button
B. Install the lock assemblies ( Touch-Bolt L )
B. Install the lock assemblies ( Touch-Bolt Lp )
Cable
Interior gasket
Mounting plate
OR
Connect to 6Vdc power adapter(Class 2)
Cable
Interior gasket
AA
Mounting plate
AA
Insert screws (2)
and tighten.
Connect the cable firmly
into connector port.
CC
BB
BB
OR
Insert screws (2)
and tighten.
CC
Red wire into bottom pin.
OR
The cable must be arranged
as shown in the diagram.