User's Manual

User Manual

Bluetooth Conference Speaker

Preface

This product is a Bluetooth conference speaker with integrated USB cable, plug and play,

zinc alloy metal frame.

Please refer to this manual before using this product.

Diagram

How to connect

1. Press and hold the Bluetooth button for 2 seconds with prompt "Pairing" to enter the

pairing mode. Turn on the Bluetooth function of the mobile phone or tablet and search for

"Palovue iConf" for pairing. It will prompt "Speaker Connected" after the successful pairing.

2. Hold the Bluetooth button 2 seconds to disconnect and enter the pairing mode. Tap the

Bluetooth button to re-connect the device.

3. Long press the “Mute+V-” composite key, all of the led will light on and the previous

pairing information would be cleared. Then you can re-pairing with your device.

4. Press the power button to play or pause the audio play in the power on status.

Note: It will power off automatically without any activity after 10 minutes.

PAGE 1
User Manual Bluetooth Conference Speaker Preface This product is a Bluetooth conference speaker with integrated USB cable, plug and play, zinc alloy metal frame. Please refer to this manual before using this product. Diagram How to connect 1. Press and hold the Bluetooth button for 2 seconds with prompt "Pairing" to enter the pairing mode. Turn on the Bluetooth function of the mobile phone or tablet and search for "Palovue iConf" for pairing.
PAGE 2
Product Specification Model Bluetooth Speaker Conference Bluetooth Version 5.
PAGE 3
used with this unit to ensure compliance with the Class B FCC limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.