Operating Manual & Parts List 9682072A, 9682073A & 9682075A Bench Grinders 9682073A shown. Read carefully and follow all safety rules and operating instructions before first use of this product. 9643556.
Palmgren Operating Manual & Parts List 9682072A, 9682073A and 9682075A DESCRIPTION Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals; work in a well ventilated area and work with approved safety equipment.
Palmgren Operating Manual & Parts List 9682072A, 9682073A and 9682075A SAFETY RULES (CONTINUED) 3. Position tool rest (D) so that distance between tool rest (D) and wheel (P) is less than 1/16”. Reposition angle of tool rest if necessary. Secure all knobs. • Mount right tool rest in a similar manner. KNOW HOW TO USE TOOL • Use right tool for job. Do not force tool or attachment to do a job for which it was not designed.
Palmgren Operating Manual & Parts List 9682072A, 9682073A and 9682075A INSTALLATION (CONTINUED) erly grounded outlet box or a properly grounded wire system. • Many cover plate screws, water pipes and outlet boxes are not properly grounded. To ensure proper ground, grounding means must be tested by a qualified electrician. • To mount grinder to wooden bench top, use 1/4 x 1¼” wood screws with flat washers beneath heads.
Palmgren Operating Manual & Parts List 9682072A, 9682073A and 9682075A • Models 9682072A and 9682073A: Replacement wheels must have a minimum rated speed of at least 3600 RPM. • Model 9682075: Replacement wheels must have a minimum rated speed of 1800 RPM. • Maximum wheel diameter is 6” for 9682072A, 8” for 9682073A, and 10” for 9682075A. • To loosen nuts holding the wheels, disconnect power and push a wood wedge between the tool rest and the wheel to keep the shaft from turning.
4 3 5 6 9 14 7 8 13 27 23 16 48 16 26 17 28 24 18 46 20 Figure 5 – Repair Parts Illustration for 9682072A, 6˝ Bench Grinder 1 2 10 11 12 15 35 47 25 22 19 21 33 32 17 15 33 34 39 38 41 24 48 16 13 28 26 20 16 42 10 31 30 6 14 7 8 9 11 12 43 REPAIR PARTS ILLUSTRATION FOR 9682072A, 6˝ BENCH GRINDER 29 4 44 2 1 Palmgren Operating Manual & Parts List 9682072A
* 9624464.02 9600064.00 9618904.00 9602034.00 * 9624465.02 9616841.02 N/A 9632291.01 9625177.02 * * 9617315.01 9625816.00 * 9625817.02 N/A 9608099.01 * * 9600067.01 9625813.02 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 7 (∆) Not shown. (N/A) Not available as repair part. (*) Standard hardware item, available locally.
Figure 6 – Repair Parts Illustration for 9682073A, 8" Bench Grinder REPAIR PARTS ILLUSTRATION FOR 9682073A, 8" BENCH GRINDER Palmgren Operating Manual & Parts List 9682073A 8
Philips Screw, 3/16˝ × 3/8˝ Wheel Guard Cover Hex Nut, 5/8˝, LH Thread Outer Wheel Flange Grinding Wheel, 36 Grit, 5/8˝ Bore Wheel Guard Inner Cover Motor Assembly Dust Port Assembly Philips Screw, 3/16˝ × 1/2˝ Eyeshield Mounting Plate (Set-L&R) Eyeshield (includes 9, 11, 12) Set of 2 Eyeshield Plate Spark Deflector (Set of 2) Flat Washer, 1/4˝ Inner Wheel Flange Locking Knob, 1/4˝ × 1/2˝ Flat Washer, 3/8˝ Locking Knob, 3/8˝ × 1/2˝ Grooved Tool Rest, Right Grinding Wheel, 120 Grit, 5/8˝ Bore Philips Hex
Figure 7 – Repair Parts Illustration for 9682075A, 10" Bench Grinder REPAIR PARTS ILLUSTRATION FOR 9682075A, 10" BENCH GRINDER Palmgren Operating Manual & Parts List 9682075A 10
* 9616911.04 * 9624480.00 9602040.00 * 9626057.01 9625815.02 N/A 9632291.01 9625177.02 N/A * 9624481.01 9625816.00 * 9625817.02 N/A 9608099.01 * * N/A 9625813.02 9625812.00 N/A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 11 (∆) Not shown. (N/A) Not available as repair part. (*) Standard hardware item, available locally.
Palmgren Operating Manual & Parts List 9682072A, 9682073A and 9682075A PALMGREN WARRANTY C.H. Hanson / Palmgren warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground or otherwise altered, or used for a purpose other than that for which it was intended. The warranty does not cover expendable and/or wear part (i.e.
9670100_oipm_En011_9644070.01 - 12-28-2018__________________________9644070.01 - 12-28-2018_________ Operating Manual & Parts List 9670100 Pedestal Grinder Stand UNPACKING Carton should be handled with care to avoid damage from dropping, bumping, etc. Store and unpack carton with correct side up. After unpacking, inspect carefully for any damage that may have occurred during transit. Check for loose, missing or damaged parts.
9670100_oipm_En011_9644070.01 - 12-28-2018__________________________9644070.01 - 12-28-2018_________ Palmgren Operating Manual & Parts List 9670100 PALMGREN WARRANTY C.H. Hanson / Palmgren warrants their products to be free of defects in material or workmanship.