Instructions / Assembly

Operating Manual & Parts List 9670100
UNPACKING
Carton should be handled with care to avoid damage from dropping, bumping, etc. Store
and unpack carton with correct side up. After unpacking, inspect carefully for any damage
that may have occurred during transit. Check for loose, missing or damaged parts. If any
damage or loss has occurred, claim must be filed with carrier immediately. Check for com-
pleteness. Immediately report missing parts to dealer.
ASSEMBLY INSTRUCTIONS
ASSEMBLE STAND
Refer to Figure A. Using the screws and washers (1) provided, screw together the footplate
(2) and column (3), as illustrated. Tighten the screws securely. Position stand 9670100
securely.
MOUNT STAND TO SURFACE
Refer to Figure B. Ensure it is steady. Install the stand on a level, stable and robust ground
surface and secure it against falling over with screws that are appropriate for the ground
surface. The screws must securely anchor the stand in the ground surface. (Screws not
included in scope of delivery).
SECURE BENCH GRINDER TO STAND
Using appropriate screws, secure the bench grinder to be attached to the stand. (Screws
not included in scope of delivery).
9644070.01 - 1218
Pedestal Grinder Stand
3
2
1
Figure A
Figure B
Base
Part #
9642805.01
9670100_oipm_En011_9644070.01 - 12-28-2018__________________________9644070.01 - 12-28-2018_________