Rabbit-B User Guide Rabbit-B User Guide Project:Rabbit/Bluetooth 5 BLE module Module name:Rabbit-B Designed:Suzhou Pairlink Network Technology Ltd. Version V1.0 V2.0 Note Create Modify Confidential Information Date 2021/06/30 2021/09/01 This document contains information that is proprietary to Pairlink . This document is commercially confidential and must NOT be disclosed to third parties without prior consent. The information provided herein is believed to be reliable.
Rabbit-B User Guide Content 1.Main Application Domain ......................................................................................................... - 3 2.Electrical Specifications ............................................................................................................ - 4 2.1.Absolute Ratings ............................................................................................................ - 4 2.2.Recommended Operating Conditions ...................................
Rabbit-B User Guide 1.Main Application Domain 1:MCU data pass-through. 2:Bluetooth Printer / Scanner / Digital price tag etc. 3:Remote control / Keyboard and Mouse / Toys / Smart phone self timer etc. 4:Industrial remote control / Industrial telemetry / Industrial data collection. 5:Smart home / Intelligent lighting / Intelligent access control system. -3www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide 2.Electrical Specifications 2.1.Absolute Ratings Parameter Power Supply(V) Storage temperature(℃) Specification Min. Max. -0.3V +3.6V -55 +125 Unit Burn the module permanently if it exceeds +3.6V Working temperature (℃) ESD HBM -40 +85 -3.5KV +3.5KV Human Body Model ESD CDM -500V +500V Charged Device Model 2.2.Recommended Operating Conditions Parameter Power Supply(V) Specification Min. Typical Max. 1.8 3.3 3.
Rabbit-B User Guide Digital I/O Characteristic Characteristics Condition Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage VBAT=3V3 Symbol Specification VIL Typical 0 Max. 0.9 VIH 2.0 3.3 3.6 V VOL 0 - 0.33 V VOH 2.97 - 3.3 V -5www.pairlink.com.cn All rights reserved Unit Min. - Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide 3.Hardware Design and PCB layout 3.1.Pin assignment and Pin description Rabbit-B Pin definition can refer to Figure 1. Table 1: Module Pin Description Pin Number Pin Name I/O Alternate Function Description 11 1,17,24,27 VBAT GND P P Power Supply(DC1.8V~3.6V). 12 RESET DI Reset signal (active high). 13 LOG_OUT DIO Log_out,not intended for customer use.
Rabbit-B User Guide Note: GPIO has integrated pull-up and pull-down resistors. Support GPIO super multiplexing function, WAKE_UP / UART / SPI / IIC / PWM / and other functions can be arbitrarily configured on GPIO. For more GPIO function configuration questions, contact to Pairlink. As shown in the following table: GPIO Pin detailed Information. -7www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide 3.2.Appearance and Dimensions Figure 2 shows the size of the module.The components and prominent structure are not allowed put in this size range(20.5mm*14.0mm*2.6mm). The following land pattern size is recommended for user board design. However, user can modify it according PCB soldering conditions. Sufficient examination is necessary if use the modified land pattern. Figure 2: Mechanical Information -8www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide 3.3.Module Layout Guideline The layout on user PCB should be designed according to the following guideline. When the module is placed on the PCB, it must be ensured that the RF antenna area (2 times the width of the module) is hollow or suspended, and there must be no traces, vias or copper. Figure 2: Module Placement -9www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide 4.Welding Declaration The Rabbit-B module only supports one reflow soldering. Our company is not responsible for the module failure caused by multiple reflow soldering. Figure 3: Reflow Soldering Temperature Figure 4: Reflow Soldering Curve - 10 www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide 5.Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Rabbit-B User Guide RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product may not be collocated or operated in conjunction with any other antenna or transmitter. Industry Canada (IC) CAN ICES-003 (B)/NMB-003(B) This device complies with Industry Canada’s licence-exempt RSSs.
Rabbit-B User Guide Cetéquipementestconforme aux limitesd'exposition aux rayonnements IC établies pour unenvironnement non contrôlé. Cetéquipementdoitêtreinstalléetutilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. OEM Integration Instructions: This device is intended only for OEM integrators under the following conditions: The module can be used to installation in other host. The transmitter module may not be co-located with any other transmit or antenna.
Rabbit-B User Guide PCB Antenna N/A 2402 - 2480 -0.41dBi - 14 www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.
Rabbit-B User Guide IMPORTANT NOTE: This Module (IC: 24210-RABBIT) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Rabbit-B User Guide Science et développement économique Canada pour le module, précédédu mot "contient" ou d’une formulation similaire exprimant la même signification, Contient IC: 24210-RABBIT. Antenna Specification: Antenna Type PCB Antenna Frequency Range Maximum Peak (MHz) Antenna Gain(dBi) 2402 - 2480 -0.41 Manufacturer N/A - 16 www.pairlink.com.cn All rights reserved Suzhou Pairlink Network Technology Ltd.