Quick Start Guide

ManualsBrandsPACKARD BELL ManualsComputers & AccessoriesLaptop

N11250: Quick Start Guide

Right

Click

Left

Click

DC Input

USB 3.0

Mini HDMI

USB type C (data only)

Camera

Power indicator light

Charging indicator light

Caps lock indicator light

Num lock indicator light

Touchpad

Dual speakers

SSD slot

3.5mm headphone jack

Power button

USB 2.0

MicroSD card slot

7 8 9

Adapter

11.6” Laptop

Quick start guide

In the box Buttons and ports

Quick Start Guide

N11250

cloudBook

Quick Start Guide

N11250

cloudBook

Adapter

Wall

outlet

Power button

Getting started Using the touchpad

Click to see all the pre-installed apps.

DC charger port

Function/Shortcut keys

Right

Click

Touch Only

(Do not press down)

Left

Click

Windows 10 S Mode

SATA M.2 SSD

2. Unscrew and open the

SSD slot cover.

3. Remove the screw inside

the SSD slot.

4. Install the SSD (in order

shown above).

5. Secure the SSD with the

screw as shown above.

6. Close and screw in the

SSD slot cover.

1. Locate the SSD slot on

the bottom of the laptop.

SATA M.2 SSD

SATA M.2 SSD (not included)

To add the SSD follow the steps below.

Expanding the storage

SATA M.2 SSD

Legal information

After completing the Windows setup, the home screen

will be displayed.

The touchpad provides the functionality of a mouse. It has a

touch-sensitive surface that senses the motion and position

NOTE: Do not press down on the area in gray below, it is for

touch commands only.

Scroll:

slide them to scroll in any direction on

the page or program

Zoom:

then move them apart or closer to

zoom-in or zoom-out.

Switch program:

swipe to either side to switch between

open windows and programs.

To access the shortcuts of the Function keys, F1 through F12,

press & hold the Fn button and select the desired

Function key.

Your laptop is shipped with Windows 10 S Mode which is a version

of Windows 10 that's streamlined for security and performance,

while providing a familiar Windows experience. To increase

security, it allows only apps from the Microsoft Store, and requires

Microsoft Edge fo

r safe browsi

ng.

For more info, visit

https://www.microsoft.com/en-us/windows/s-mode

Switching out of S mode

To increase security and performance, Windows 10 in S mode runs

only apps from the Microsoft Store. If you want to install an app

that isn't available in the Microsoft Store, you'll need to perma-

nently switch out of S mode. There's no charge to switch out of S

mode, but you won't be able to turn it back on. To switch out of S

mode follow the steps below .

1. On your PC runni

ng Windows 10 in S mode, open Settings >

Update & Security > Activation.

2. Find the “Switch to Windows 10 Home” or “Switch to Windows 10

Pro” section, then select “Go to the Store.”

Note: Don't select the link under "Upgrade your edition of Windows".

3. On the page that appears in the Microsoft Store (Switch out of S mode

able to install apps from outside the Microsoft Store.

You can expand the storage of your laptop (up to 1TB) by

adding a SATA M.2 SSD (not included) into the slot on the

bottom of the laptop.

Note: Make sure your laptop is shutdown while you are

installing or removing the SSD.

Note: After installing the SSD it must be formatted. For instructions

on how to format the SSD, please go to:

https://www.southerntelecom.com/laptops

FCC Part 15:

This equipment has been tested and found to comply with the requirements for a Class B digital

device under Part 15 of the Federal Communications Commission (FCC) rules. These

requirements are intended to provide reasonable protection agai

nst harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or

encouraged to try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

connected.

• Consult the dealer or an experienced radio/TV technician for help. Do not attempt to repair or

modify this equipment.

Warning

responsible for compliance could void the user’s authority to operate the equipment.

“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.”

Shielded USB cables must be used with this unit to ensure compliance with the Class B FCC limits.

Information Regarding Exposure to Radio Frequency Energy

Your device is designed and manufactured not to exceed the emission limits for exposure to RF

energy set by the Federal Communications Commission of the United States (FCC). Information

http://www.fcc.gov/oet/ea/ after searching on the FCC ID for your Device, which can be found on

the back of the Device. If your electronic device has internal memory on which personal or other

dispose of your device to assure another party cannot access your personal data. Data

sanitization varies by the type of product and its software, and you may want to research the best

sanitization process for your device before disposal. You may also check with your local recycling

facility to determine their data sanitization procedures during the recycling process.

Battery Disposal & Recycle

This device contains a Lithium-ion battery. The battery must be recycled or disposed of properly.

Designed and distributed by Southern Telecom Inc. Brooklyn, NY 11220

Packard Bell

is a registered trademark of PBX Holding LLC.

All other trademarks and trade names are those of their respective owners.

1-800-822-8837

1-Year Limited Warranty

Territory: United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER

This product (including any accessories included in the original packaging) as

supplied and distributed new by an authorized retailer is warranted by Southern

Telecom, Inc. to the original consumer purchaser against defects in materials and

workmanship (“Warranty”) as follows:

To obtain warranty service:

Visit our website at www.southerntelecom.com

Click on Product Support

Select the Brand of your device

Select Service Request

Your product will be repaired or replaced, at our option, for the same or similar model

of equal value if examination by the service center determines this product is

claim with the carrier.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or

repairs this product. All products being returned to the authorized service center for repair must be suitably

packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY

DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS

WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON,

FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT,

OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE

REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY

INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED

TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR

INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.

NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE

PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE

OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential

damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty

province. Contact your authorized retailer to determine if another warranty applies.

POWER ON: Press and hold the POWER button until the

tablet turns on.

POWER OFF: Select Start > Power > Shut down.

Note: The device should be shut down through the Windows OS as

shown above. However, if you need to force the device to shut

down, press and hold the POWER button until the display turns oﬀ

and the device shuts down.

IC WARNING

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause

undesired operation of the device

ADVERTENCIA IC

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux

RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le

fonctionnement est soumis auxdeux conditions suivantes :

(1) Cet appareil ne doit pas causer d'interférences.

(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de

provoquer un fonctionnement indésirable de l'appareil.