Pacific Microwave Research, Inc. AT-100 Series Microwave Video and Audio Transmitter USER’S MANUAL Pacific Microwave Research, Inc. 1485 Poinsettia Avenue, Suite 111 Vista, CA 92081 760.295.5416 www.pmicrowave.
Pacific Microwave Research, Inc. AT-100C3 User’s Manual © 2003 IMPORTANT WARNING! THIS EQUIPMENT WILL POSE A RADIATION HAZARD IF IMPROPERLY HANDLED Pacific Microwave Research, Inc. (PMR), in compliance with RF exposures limits set forth in OET Bulletin 65, Fourth Edition, August, 1999.1 The following text is intended to notify the user of PMR’s transmitter equipment that a radiation hazard could exist if the AT-100C3 transmitter is improperly operated.
Pacific Microwave Research, Inc. AT-100C3 User’s Manual © 2003 1.0 Introduction The AT-100C3 Microwave Video and Audio Transmitter from Pacific Microwave Research is a compact transmitter designed for short-range transmission applications under FCC Part 74, and Part 101. Common uses include law enforcement surveillance and electronic field production. The AT-100C3 is a compact unit designed for portable and field applications to transmit remote video to a central receive location.
Pacific Microwave Research, Inc. AT-100C3 User’s Manual © 2003 2.1.1 DC Power Input The AT-100C3 is designed to operate from a nominal +12 Vdc power source. Power is supplied through the front panel DB-9M connector (J3) with +12 Vdc on Pin 5 and Ground on Pin 9. This source should be fused at 2.0 A. The AT-100C3 will operate over a voltage range of +11 to +14.5 Vdc. Power consumption at the high power setting (2 W) is nominally 1.2 A. Power consumption at the low power setting (0.5 W) is nominally 0.7 A.
Pacific Microwave Research, Inc. AT-100C3 User’s Manual © 2003 3.0 Power Output The AT-100C3 is capable of operating at two power levels to fit a variety of operational scenarios. The high power setting is defaulted with no connection to Pin 1 of J3. The nominal power output on high power is 0.5 W. To select low power, Pin 1 of J3 must be connected to ground.
Pacific Microwave Research, Inc. AT-100C3 User’s Manual © 2003 5.0 Specifications Electrical: • Frequency Range o AT 100C3 – 6.4 to 7.1 GHz • VSWR – Infinite (open or short) • Modulation – True FM • Modulation Sense – Positive • Frequency Stability – +0.002% • Emphasis – NTSC or PAL • Spurious/Harmonic Output – > -65 dBc • Analog or Digital Input filtering options • • • • • Video Input Impedance – 75 Ω unbalanced Video Input Response – 10 Hz to 4.
Pacific Microwave Research, Inc. AT-100C3 User’s Manual © 2003 7.0 Connector Pin-out Connector J3 DB-9 Male System I/O Connector Pinout Data Pin # 1 2 3 4 5 6 7 8 9 Function Lo/Hi Power – Tie to ground for low power Audio 1 Input (HI) Audio 2 Input (HI) Aux Video Input (parallel with J10 BNC) +11 to +14.5 Vdc – Primary power input Ground Audio 1 Input (LO) Audio 2 Input (LO) Ground 8.0 Repair There are no user serviceable parts inside the AT-100C3.