User Guide Pace ND7506 BRINGING TECHNOLOGY HOME www.pace.
CONTENTS SAFETY INFORMATION................................................................................................... 3 IMPORTANT SAFETY INSTRUCTIONS............................................................................ 3 Regulatory information............................................................................................... 5 REAR PANEL................................................................................................................... 6 CONNECTING THE EQUIPMENT...
SAFETY INFORMATION This digital set-top box has been manufactured and tested with your safety in mind. However, improper use can result in potential electric shock, property damage or fire hazards. To avoid defeating the safeguards that have been built into your set-top box, please observe the precautions discussed in this document. Warnings on the power supply unit IMPORTANT SAFETY INSTRUCTIONS Before you install or use the apparatus, you must read and understand these Important Safety Instructions.
SAFETY INFORMATION (cont.) In addition to the Important Safety Instructions, please read the Safety Information below. Power sources The model number, serial number, and electrical rating of this set-top box are on a label on its base. You must operate your set-top box only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
SAFETY INFORMATION (cont.) Safety aspects of connections Regulatory information Full details of the rear panel are on page 6. CAUTION: Connecting Do not connect your set-top box (or any other equipment such as a TV or DVD player) to the power supply until you have properly connected all the other cables. • Do not attempt to modify your set-top box without written authorization from the manufacturer. Unauthorized modification could void your authority to operate your set‑top box.
REAR PANEL TELEPHONE OUT For future use RESET For restarting your set-top HDMI OUT HDMI video and audio output ETHERNET For connection to a home network VIDEO / AUDIO OUT Component video output for analog HDTV CABLE IN From cable service-provider VIDEO / AUDIO OUT Combined composite video and stereo audio output for analog SDTV HDMI IN HDMI ® video and audio input DIGITAL AUDIO OUT Electrical S/PDIF audio output RESET Press and hold for four seconds to restart your set-top.
CONNECTING THE EQUIPMENT Possible setups In order for you to view programs broadcast in high-definition, your set-top box must be connected to a suitable HDTV or computer monitor. Your equipment should have been connected up by your installer. However, if you need to disconnect and reconnect your equipment, read pages 8 and 9. There are two typical connection setups shown: • Setup A for an HDTV. • Setup B for an HDTV, with an optional VCR (or DVD recorder).
CONNECTING THE EQUIPMENT (cont.) Setup A - HDTV (HDMI connection) Setup A uses an HDMI connector to connect to the HDTV. This displays the highest quality picture on your HDTV and also means there will be no picture degradation on any copy-protected programs (provided the link remains secure – see page 7). HDTV AUDIO / VIDEO IN HDMI CABLE INPUT WALL AC OUTLET NOTE This diagram shows power cords that have 2-blade polarized plugs. You may need to use a different type of plug in the region where you live.
CONNECTING THE EQUIPMENT (cont.) Setup B - VCR with HDTV (HDMI connection) Setup B uses an HDMI connector to connect to the HDTV. This displays the highest quality picture on your HDTV and also means there will be no picture degradation on any copy-protected programs (provided the link remains secure – see page 7).
CONNECTING THE EQUIPMENT (cont.) WARNINGS Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until you have properly connected all the other cables. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
FRONT PANEL LCD display Displays the current channel number and other information. The functionality depends on your service provider. Power light Lights green when your set‑top box is on and lights red when your set-top box is in standby. NOTES Your cable TV service-provider determines the digital channels, services, and screen information that you see on your TV when you use your set-top box and its remote control.
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) THE PRODUCT TO WHICH THESE TERMS RELATE (THE “PRODUCT”) INCORPORATES SOFTWARE WHICH IS OWNED BY PACE plc (“PACE”) OR ITS THIRD PARTY LICENSORS (THE “SOFTWARE”). BEFORE USING THE PRODUCT PLEASE READ THESE TERMS. IF YOU DO NOT AGREE TO THESE TERMS YOU MAY NOT USE THE PRODUCT AND SHOULD IMMEDIATELY RETURN THE PRODUCT TO YOUR SUPPLIER. THESE TERMS ALSO APPLY TO ANY MODIFICATIONS, UPDATES OR SUPPLEMENTS TO THE SOFTWARE PROVIDED TO YOU.
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) (cont.) D. Termination These Terms are effective until terminated. You may terminate these Terms by returning the Product to your supplier. These Terms will terminate automatically without notice if you fail to comply with these Terms or any other written agreement between you and Pace. Upon termination you must return the Product to your supplier. E. Disclaimer 1.
www.pace.com Pace and are trademarks and/or registered trademarks of Pace plc.
