INTERNATIONAL November 2000 Data Sheet 17384 DRAFT 20462, 20453 DualTech Desktop Reader Installation Instructions
Description The DualTech PC Desktop Reader is an accessory for use with a PAC Adminstration interface unit. This system is used for direct PC to controller communications (fig. 1). Note: This Desktop Reader will read KeyPAC and PAC ID-devices. Note: It is unlikely that you will need an Interface Kit at a PC that already has a CNC attached. CNCs have either front panel or external readers for administration purposes. WARNING: The Interface Unit contains mains voltages.
DualTech Desktop Reader 17384 DRAFT Installation Opening the Interface Unit WARNING: This Interface Unit contains mains voltages. Before opening ensure that it is disconnected from the mains. Failure to do so can result in injury or death by electric shock. Make sure that the Interface Unit is not connected to the mains then remove the lid by removing the 4 screws recessed in the base.
DualTech Desktop Reader 17384 DRAFT Desktop Reader to Interface 56 inch cable supplied. PC Interface Desktop Reader 4-pole Terminal Block -V VCA SIG +V Desktop reader ———— ———— ———— ———— -V VCA SIG +V Green Yellow White Brown Specification Dimensions 5.12in x 3.54in x 1.25in Voltage 10.
