User Manual

Installation Guide
January 2003 15162 Ver 2.8 DRAFT E
PAC Portico Portico, 1 Lower Ragsdale Drive, Building 3, Suite 800, Monterey, California 93940 USA
www.PACPortico.com
This document is correct at the time of going to press. However, as part of our ongoing product
enhancement program we reserve the right to make changes to the product and/or literature at any time
without prior notice.
Central Network Controller
Copyright and Protective Notices
1. The copyright of this document and the associated drawings is the property of PAC Portico (Blick
USA, Inc.), and is issued on condition that it is not copied, reprinted or reproduced, nor its
contents disclosed, either wholly or in part, without the consent in writing of, or in accordance
with the conditions of a contract with of
PAC Portico (Blick USA, Inc.).
2. The publication of information in this document does not imply freedom from patent or other
protective rights of
PAC Portico (Blick USA, Inc.), or others.
3. Performance figures and data quoted in this document are typical, and must be specifically
confirmed by of
PAC Portico (Blick USA, Inc.) before they become applicable to any tender, order
or contract.
Training and Technical Support
Training courses covering the installation and use of all PAC Portico products are regularly held at
Blick USA in Monterey California.
It is strongly recommended that any persons installing or programming PAC Portico
products attend a suitable training course beforehand.
Technical Support for all PAC Portico products is available during normal office hours. This
service is provided primarily for the use of trained installers. End users of PAC Portico products
should first contact their installation or maintenance company before contacting PAC Portico.
Literature. If you have any comments on this or any other PAC Portico literature, then you can
either write to ‘Technical Writing’ at the address below or you can email us at: manuals@PAC
Portico.com