Installation Guide
Speaker connection harness for select 2018-2019 Ford
vehicles with factory amplied B&O sound systems
Pacific Accessory Corporation
Page 1
Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
APH-FD02
Rev: V1
Date: 061819
Introduction and Features
The APH-FD02 simplies speaker wire connections when adding an aftermarket radio or amplier . Aftermarket equipment
can be easily added with no need to cut or modify a vehicle’s original wiring.
Wiring Overview
Installation Notes
1. It is always best to use a tone generator (PAC Part# TL-PTG2) to verify that the tables in this manual, and the labels on the
wires, match the wiring in your specic vehicle.
2. If you are installing an aftermarket amplier, and would like to leave any of the factory speakers connected to the factory
amplier, simply connect the speaker wires (color for color) between the male and female connectors. For example: If you
want the rear speakers to be powered by the factory amplier, simply connect the Green, Green / Black, Purple and Purple /
Black wires from the male connector to the Green, Green / Black, Purple and Purple / Black wires from the female connector.
1. Locate the vehicle factory amplier and disconnect the Gray 20-pin connector.
2. Connect the APH-FD02 harness to the connector that was disconnected in the previous step.
3. Connect the male connector from the APH-FD02 to the amplier.
4. Connect the longer loose wires from the APH-FD02 to your aftermarket amplier or passive crossovers according to the
tables in this manual.
Installation Steps
Connect to aftermarket amplier
20
11
10
1
Green/Black
Red/Black
Purple/Black
White/Black
Gray/Black
Blue/Black
Brown/Black
Orange
Orange
Pink
20
11
10
1
For Future Use
For Future Use
白色热缩管
APH-FD02-HAR V2
Green
Red
Purple
White
Gray
Blue
Brown
Orange
Orange
Pink/Black
Green/Black
Red/Black
Purple/Black
White/Black
Gray/Black
Blue/Black
Brown/Black
Orange
Orange
Pink
Green
Red
Purple
White
Gray
Blue
Brown
Orange
Orange
Pink/Black
1
Pink
CAN +
11
Pink/Black
CAN -
2
Orange
Not Used
12
Orange
Not Used
3
Orange
Not Used
13
Orange
Not Used
4
Brown / Black
Center Channel -
14
Brown
Center Channel +
5
Blue / Black
Subwoofer 1 -
15
Blue
Subwoofer 1 +
6
Gray / Black
Right Front Speaker -
16
Gray
Right Front Speaker +
7
White / Black
Left Front Speaker -
17
White
Left Front Speaker +
8
Purple / Black
Right Rear Speaker -
18
Purple
Right Rear Speaker +
9
Red / Black
Subwoofer 2 -
19
Red
Subwoofer 2 +
10
Green / Black
Left Rear Speaker -
20
Green
Left Rear Speaker +
Wire Color
Subwoofer 2
Right Front Speaker
Subwoofer 1
N/A
N/A
CAN
Pin Number Wire Description Label
Left Rear Speaker
Center Channel
Left Front Speaker
Right Rear Speaker