Mobile Phone Brand Name:GIGO Model Name: FIESTA FCC ID: Q2YFIESTA
CONTENT 1.WARNINGS ....................................................................... - 1 2.GETTING STARTED ........................................................ - 2 3.YOUR PHONE .................................................................. - 3 4.FUNCTION MENU ........................................................... - 3 4.1. MESSAGE ...................................................................... - 4 4.2.CONTACTS.....................................................................
1.Warnings Not following these simple guidelines may be dangerous or illegal. Read the complete user guide for further information. TURN ON SAFELY Do not turn on the phone when wireless phone is prohibited or when it may cause interference or danger. ROAD SAFETY Obey all road safety laws. Always use both of your hands to operate the vehicle while driving. INTERFERENCE All wireless phones may be sensitive to interference, which may affect performance. TURN OFF IN HOSPITALS Follow all restrictions.
CONNECTING TO OTHER DEVICES When connecting to any external device, read its user guide for detailed safety instructions. Do not connect with incompatible products. 2.Getting Started 2.1 SIM Card Installation When you subscribe to a cellular network, you will receive a plug-in SIM card complete with your subscription details, such as your PIN, and available optional services. Caution: Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt.
pictures from PC, through USB cable, to the U-disk in phone or identified SD card that is inserted. 3.Your Phone 3.1Key function 1.Right key: Move the cursor with the direction of right. 2.Left key: Move the cursor with the direction of left. 3. Send key: To dial and pickup calls; on standby mode, to see the record of all calls made. 4. End key: To end a call or reject incoming calls. Under most circumstances pressing this key will put the mobile phone into standby mode. Hold down this key to power On/Off.
This function can begin a new SMS. After completing the SMS, press left soft key to access to options. 4.1.2 Inbox To check received messages in inbox. 4.1.3 Outbox Checks the information of unsuccessfully sent message in outbox . 4.1.4 Drafts You can save unsent and edit incomplete messages in drafts box. 4.1.5 Sentbox Check the sent messages in sent box. 4.1.6 Templates 5 a template for choice 4.2.
can be previewed in the screen; press OK key to shoot and right soft key to back, left soft key to access Options. Use navigation keys, you can choose and enter the functions list on screen. 4.4.3 DV In the video recorder interface, press left soft key to access Options. Use navigation keys, you can choose and enter the functions list on screen. 4.4.4 Audio This function menu is used to store and play the multimedia file.
Sound. 4.5.2. Phone settings Time&date/Selectlanguage/Shortcutsettings/Autopoweron/off; Power management/Restore factory settings Input default password 1234 to restore factory settings 4.5.3 Display Wallpaper Setting, Idle display settings; Contrast; Backlight; Keypad backlight time; Animation effect ; 4.5.4 Security PIN/Modify PIN2/Phone locked/ modify the cellphone password/ privacy /Lock screen by end-key /Fixed dialnumber/Blacklist Default psaaword 1234 4.5.
easily. Use navigation keys to navigate other date. Press left soft key, you can enter to submenu to do options. 4.6.4. Bluetooth This mobile phone support Bluetooth wireless connection. You can establish wireless connection between mobile phone and device to realize voice communication, data exchange and synchronization. Press left soft key to do options 4.6.5. Ebook It supports TXT electronic book 4.6.6. Calculator This feature can use your phone as a calculator for simple claculations.
charger more than a week. Overcharging may shorten its lifespan. • Extreme temperatures can affect the ability of your battery to charge. Battery needs the fit temperature. If the surrounding temperature is over 50°C, the battery cannot be charged. • Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery.
moving parts and electronic components can be damaged. • Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. • Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. • Do not attempt to open the device other than as instructed in this guide. • Do not drop, knock, or shake the device.
The operation time of the battery depends on conditions such as: • Transmitting power level • Signal (distance between the phone and the base station) • Network parameters defined by the operator • Phone use (WAP, games, SMS) • Charging procedure used Exclusions: Subject to the exclusions contained below: 1. Damage due to the improper use. 2. User does not follow the manual. Explanation: The company has the final right of the explanation for this document. Software upgrades will not be announced.
Important Regulatory Information FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
BODY-WORN OPERATION: This device was tested for typical body-worn operations with the back of the phone kept 0.5cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.5cm must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 0.
transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
exposure to RF energy. The design of your phone complies with the FCC guidelines (and those standards). Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. TIPS ON EFFICIENT OPERATION: For your phone to operate most efficiently: • Extend your antenna fully.
needed. RF Exposure Information: FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with the minimum separation distance of 0.5cm is 0.608W/kg; next to the head is 0.558W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.
including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
