Owner’s Manual E8 Elliptical Display Type: 15.
1.0 SAFETY INFORMATION IMPORTANT: Please read all instructions and warnings before assembly and operation. To assure the correct use of the product, basic safety measures should always be followed including the warnings and cautions listed in this Owner’s Manual. SAFETY SYMBOLS USED IN THIS SERVICE MANUAL WARNING CAUTION DANGER Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
Waste Disposal Products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites). 6.0 Engineering Mode Settings When you initially open the Engineering Mode, it is defaulted to the Project mode offering a variety of options to select. 6.1 Exit 6.1.1 Press the EXIT button to return to the HOME menu page. It is required that you enter the Machine Serial Number. Please refer to section 6, Asset Manager Setting for the method of input. 6.
6.2.1 6.2.2 6.2.3 7.0 To enter this page, click the WiFi tab. You can turn WiFi ON or turn WiFi OFF . A listing of connectable WiFi access points will be displayed when opened. The connection procedure is in accordance with the Android Standard Connection Procedure and with ones which have been connected previously will be automatically connected. Press the “back” arrow in the upper left corner of the screen to return to the Engineering Mode menu. Preference Setting 7.1 Unit 7.1.1 7.1.
7.3 Brightness 7.3.1 7.3.2 The default system setting for the brightness level is Brightest. Use the Left and Right slide to adjust the screen brightness. 7.4 Maximum Sound Volume 7.4.1 7.4.2 The default volume setting is preset to the maximum. Use the Left and Right slide to adjust the volume desired (system magnification). 7.5 Auto Lock 7.5.1 Switching the Auto Lock On / Off 7.5.1.1 The default setting is Off . The default password is 1234.
.9.1 There are 6 Apps for your selection: Spotify / Netflix / Miracast / HDMI IN/ Google / YouTube. 6.9.1.1 The default for YouTube, Google, Spotify, and Netflix is set to ON . Miracast and HDMI IN are defaulted to OFF . 6.9.1.2 If set to ON, the system will show its correspondent icon at home page. If set to OFF, then the Icon will not show on the home page. 8.0 Equipment Information 8.1 Model: The default setting is B8/ R8/ E7/ E8. 8.2 8.
.4 Total Distance: Shows the total accumulating distance of the equipment. According to the system, the unit will be shown by mile/ km, and it will display to 1 decimal place. And you can reset by pressing the button. (You need to login with proper access rights authority to execute this action.) 8.5 Console Serial Number: 8.5.1 The default setting is blank. You can click the input box to enter the data through the Android keyboard.
10.0 Using EPlus 2.0 12.0 Home Screen Overview 12.1 HOME Screen 1 Menus Training : 9 Training Programs are provided for you. Heart Rate Control: Provide 4 Heart Rate Control Programs for you. Virtual Go: Take you out of your house and into the great outdoors through one of 10 interactive video. Target Train: Provide 5 different ecercise targets, keeping you motivated and on track for your fitness plan.
TV Youtube Netflix Miracast Music Google Spotify Weather, Time, Date and Region Display area - Weather: displays the tempature and weather icon if network is avaliable. - Time: displays the time zone according to the engineering mode setting. - Date: displays the date and day. - Region:displays the region according to the engineering mode setting. 12.2 Quick Start 12.3 Login : Tap to immediately begin a workout. : Tap to Login Page. (Refer to Section 13.1) 12.
12.5.2 Selection of 15 Lanauges: Item Display Language Item Display Language 1. English 9. Portuguese 2. Arabic 10. Russian 3. Simplified Chinese 11. Spainish 4. Traditional Chinese 12. Swedish 5. French 13. Thai 6. Deutsch 14. Turkish 7. Japanese 15. Vietnamese 8. Nederlands 12.5.3 On-Screen Keypads and Keyborads 12.5.3.1 These keypads and keyboards are used to input program setting, login/register information, etc.
13.0 Bluetooth 13.
EARPHONE CHESTBELT
13.1.1 Home page Connection Status 13.1.1.1 13.1.2 Device is connecting, with EARPHONE or CHESTBELT. Device is not connecting. 13.1.2.1 Press or to enter the Bluetooth connection setting at the Home Page. 13.1.2.2 EARPHONE and CHESTBELT use different modules to connect. The EARPHONE uses CSR8670, and the CHESTBELT uses WiFi + Bluetooth SOC built- in module. 13.1.3 EARPHONE (wireless) 13.1.3.1 Loading “searching for device,” and it will show the devices list after searching. 13.1.3.
13.1.4.1 Press name. to start pairing and the will show before the device’s 13.1.4.2 After the pairing has finished, the clicked button will show the , and will show before the device’s name. 13.1.5 Disconnect the Connection 13.1.5.1 Press to disconnect the connection, the clicked button will become , and the will be disappeared. 13.1.5.2 If your connection is lost for an unknown reason (e.g., the distance is too far from the source), this will cause the same result as with the above description.
13.1.6.1 The system will begin searching the surrounding available devices, it will show when “loading.” After searching, it will show all the available devices that had been found. 13.1.6.2 The system will only search the (wireless) CHESTBELT device and will not show other devices. 13.1.6.3 And the connecting device will show at the “CONNECT” status. 13.1.6.4 Press “X” to close the window and stop pairing and searching. 13.1.7 Connection Pairing 13.1.7.1 Press name. to start pairing, and 13.1.7.
13.1.8.1 Press to disconnect the connection, the clicked button will become , and the will be disappeared. 13.1.8.2 If your connection is lost for an unknown reason (e.g., the distance is too far from the source), this will cause the same result as with the above description. 13.1.8.3 The system will be disconnected after executing the “Auto reset.” 13.1.8.4 If the user presses “Logout” the system will be disconnected. 13.1.8.5 The system will not memorize the device which had been paired.
14.1.1 Tap Login on Home Screen to access the Login Page as below. 14.1.2 Two login methods are provided for you to select: • Quick Login via CircleFit app • Email Login 14.1.3 Descriptions of Quick Login via CircleFit app 14.1.3.1 Follow the steps to Quick Login: • Enable Bluetooth in your mobile device. • Open CircleFit app. • Place your mobile device close to the buttom right of the console you are using. Note: • Registration from CircleFit app is required prior to starting Quick Login via Bluetooth.
Enter your EMAIL and PASSWORD 14.3 Email login 14.3.1 Enter your EMAIL and PASSWORD and tap Login to login. 14.4 Forgot Your password? 14.4.1 If you forget your password, please tap” ForgotPassword?”. 14.4.2 A dialog will display out as shown below. 14.4.3 Enter the email address you used when you regsistered and you will receive your password via email. 14.5 Don’t have an Account Yet? Sign up here. 14.5.1 Tap this to access the CIRCLECLOUD GO SIGN UP Page. (Refer to next page.) 14.5.
Scroll the sliding bar to next field. 14.5.3.1 Account Tap the field next to Account. A keypad will display for you to enter the user’s Email address. 14.5.3.2 Password Tap the field next to Password. A keypad will display for entering the user’s password. Character limit: 6~10 14.5.3.3 Retype Password Enter user’s password again to confirm the password. Character limit: 6~10 14.5.3.4 Username Tap the field next to Username. A keypad will display for entering the username. 14.5.3.
15.1.1 Tutorial shows a few tips to help you to get started. It displays, as below, when initial login is successful. (Secondary login will not displayed in the Tutorial pages.) Tutorial>Intro Page Scroll the touchscreen to access the next page. Welcome to CircleCloud Go the most comprehensive wellness manager. Here are few tips to help you set started. 15.1.2 Tutorial> Intro Page >Target Train Page Scroll the touchscreen to access the previous/ next page. Set fitness target with Target Train! 15.1.
Scroll the touchscreen to access the previous/ next page. Measure your results with My Performance. 15.1.4 Target Train Page >My Performance Page> Body Manager Page Scroll the touchscreen to access the previous/next page. Exam your fitness metrics with Body Manager! 15.1.5 My Performance Page>Body Manager Page >My Gym Page Scroll the touchscreen to access the previous/next page. Stay informed with facility offerings with My Gym! 15.1.
Scroll the touchscreen to access the previous/next page. Create personalized workouts using My Workout! 15.1.7 My Gym Page > My Workout Page >Ready to Start Page Scroll the touchscreen to access the previous/next page. Download free CircleFit app to access all contents form your smart device and perform Quick Login with cardio equipment! 15.1.8 Tap Start to close the Tutorial pages and go to My Page. (Refer to Section 14.1) 15.2 My Page 15.2.1 Go to Home Screen > Login > My Page 15.2.1.
15.3.1 This area shows user’s performance in previous workout sessions and bulletins and/or class information from user’s club. 15.3.1.1 X: Tap to close My Page and go back to the Home Screen. 15.4 Favorite 15.4.1 This area displays the most freqent items or apps you used. 15.4.2 Tap the icon to use the app or run the app. 16.0 Training 16.1 Go to Home Screen > Training WARNING: Consult a physician before you start an exercise program.
16.3.1.1 Weight Tap the blank field to display the keypad to input the user’s wieght. Setting Range: 35-180 kg (77-396lbs) 16.3.1.2 Time Tap the blank field to display the keypad to input the workout time. Setting Range:10-120 minutes 16.3.1.3 Start Tap Start to begin workout and go to Workout Page. 16.3.1.4 Back Tap Back to go to Training Program. 16.4 Go to Home Screen > Training > Target (Setting Page) 16.4.1.1 Weight Tap the blank field to display the keypad to input the user’s wieght.
Tap the blank field to display the keypad to input the workout time. Setting Range: 10-120 minutes 16.4.2.2 Distance: Tap the blank field to display the keypad to input the workout distance. Setting Range:1-60 km (1-30 miles) 16.4.2.3 Calories: Tap the blank field to display the keypad to input workout calories. Setting Range:100-2000 16.4.3 Start 16.4.3.1 Tap Start to begin the workout and go to the Workout Page. 16.4.4 Back 16.4.4.1 Tap Back to go to the Training Program. 16.
16.6.1.3 Time Tap the blank field to display the keypad to input the workout time. Setting Range: 10-120 minutes 16.6.1.4 Start Tap Start to begin the workout and go to the Workout Page. 16.6.1.5 Back Tap Back to go to the Training Program. 16.7 Go to Home Screen > Training > Fat Burn (Setting Page) 16.8 Go to Home Screen > Training > Incline (Setting Page) 16.8.1.1 Weight Tap the blank field to display the keypad to input the user’s wieght. Setting Range: 35-180 kg (77-396lbs) 16.8.1.
16.10 Go to Home Screen > Training > Interval (Setting Page) 16.10.1.1 Weight Tap the blank field to display the keypad to input the user’s wieght. Setting Range: 35-180 kg (77-396lbs) 16.10.1.2 EASY/ MEDIUM/ HARD Tap one of them to set your workout intensity. 16.10.1.3 Time Tap the blank field to display the keypad to input the workout time. Setting Range: 10-120 minutes 16.10.1.4 Start Tap Start to begin the workout and go to the Workout Page. 16.10.1.5 Back Tap Back to go to the Training Program. 16.
16.11.1.1 Weight Tap the blank field to display the keypad to input the user’s wieght. Setting Range: 35-180 kg (77-396lbs) 16.11.1.2 Wattage Tap the blank field to display the keypad to the input wattage. Setting Range: 50~400 watts 16.11.1.3 Time Tap the blank field to display the keypad to input the workout time. Setting Range: 10-120 minutes 16.11.1.4 Start Tap Start to begin the workout and go to the Workout Page. 16.11.1.5 Back Tap Back to go to the Training Program. 16.
(1) Cool Down: Tap to cool down the program and Workout will stop in 5 minutes. (2) Pause: • Tap to interrupt the program and get into pause mode shown as below. • Workout will stop in 2 minutes. * Stop: Tap to go to Summary Page. * Resume: Tap to continue your workout. (4) Stop: Tap to end the program and go to the Summary Page. (Refer to Page 72.) (5) Menu: Tap the Menu to display the sub-menus in the center of the Workout Page shown as below.
Tap the upward or downward arrow button to increase/decrease the incline level or speed. 16.12.3 3 Slide Bars ○ Tap and hold to slide the incline or level bar to a desired level and tap OK to confirm the adjustment. Incline slide bar 16.12.4 Level slide bar 4 Workout Information Displays ○ For the Target Program the displayed items are listed and shown below. • Heart Rate (or Average Heart Rate) • Distance (Pace or Average Pace) • Calories (Cal.
16.12.5 5 Workout Profile Display Mode Buttons ○ Tap Profile/ Simple/ Lap to switch the workout display mode.
16.13 Go to Home Screen > Training > (Setting Pages) >Summary Pages With Login Without Login 16.13.1 Readouts of the Training: 1. Training: displays the workout mode. 2. Duration (Time): the total accumulated time during your workout. 3. Total Strides: the total accumulated distance mile (or kilometer) during your workout. 4. Calories: the total accumulated calories burned during your workout. 5. Average Strides/Minute 6. Average Watts 7. Average Heart Rate: The average heart rate during your workout. 8.
16.14 Go to Home Screen >Heart Rate Control 16.14.1 Heart Rate Control maintains the heartbeats per minutes you select by controlling the exercise speed and intensity of your cardio equipment to optimize your workout. 16.14.2 Here are 4 Heart Rate Control Programs provided as below: • • • Fat Burn Set your maximum heart rate to 65%. This program will adjust the intensity accordingly in order to help you reach your target heart rate. • • • Aerobic Set your maxiumum heart rate to 75%.
Fat Burn - Setting Page Aerobic - Setting Page Time Used to input the workout time. Tap the blank field to display the numeric keypad for input. Setting range: 10-120 minutes Age Used to input the user’s age. Tap the blank field to display the numeric keypad for input. Setting range: 10-99 Weight Used to input user’s weight. Tap the blank field to display the numeric keypad for input.
16.14.4 Tap Fat Burn / Aerobic/ Performance/ Customize on the【Heart Rate Control】Page to go to the corresponding setting page. Performance - Setting Page Aerobic - Setting Page Time Used to input the workout time. Tap the blank field to display the numeric keypad for input. Setting range: 10-120 minutes Age Used to input the user’s age. Tap the blank field to display the numeric keypad for input. Setting range: 10-99 Weight Used to input user’s weight.
16.15 Heart Rate Control - Workout Page (Profile/ Simple) 16.15.1 Tap Profile or Simple to switch the workout display mode. 16.15.2 If no heart rate is detected, the program will be paused and a message saying “No heart rate Detected. Program will stop in 2:00” will be displayed. 16.15.3 When time remaining is zero or when the user taps Stop, the user will be taken to the Summary Page of the Hear Rate Control. 16.16 Heart Rate Control- Summary Page 16.16.1 Tap Done to go to the Home Screen. 16.16.1.
16.16.2 Readouts of the Heart Rate Control • Heart Rate Control: displays the workout mode of heart rate control programs. • Duration (Time): the total accumulated time during your workout. • Distance: the total accumulated distance mile (or kilometer) during your workout. • Calories: the total accumulated calories burned during your workout. • Average Pace: the average time to complete a mile (or kilometer), displayed in minutes: seconds.
17.0 Virtual Go 17.1 Go to Home Screen >Virtual Go 4 8 9 17.1.1 We offer 10 beautiful routes for you to experience a deeply immersive interactive experience.
17.2 Go to Home Screen > Virtual Go >Setting Page 17.2.1.1 INTERACTIVE ON • Incline level adjusts to changes in terrain if tapped this button. 17.2.1.2 INTERACTIVE OFF • Incline level does not adjust to changes in terrain if tapped this button. 17.2.1.3 Weight • Tap the blank field to display the keypad to input for your weight. • Setting range: 35-180 kg (77-396lbs) 17.2.1.4 Time • Tap the blank field to display the keypad to input the workout time. • Setting Range:10-120 minutes 17.2.1.
Workout 5 Information ○ Displays 3 Slide Bars ○ screen 4 Full ○ button 1 Operation buttons ○ Increase/ 2 Decrease ○ arrow buttons 17.4 Go to Home Screen > Virtual Go > Setting Page > Workout Page Tap this icon to enter full screen as below. Tap this zone to show your workout information as below.
Tap anywhere to exit to full screen. Full Screen with Workout Information Tap anywhere to exit to full screen. 17.
With Login 17.5.1 Your workout information is displayed in Summary Page and will be uploaded to CircleCould if you are logged in. 17.5.2 Done 17.5.2.1 Tap Done to go to the Home Screen. 17.6 Target Train 17.6.1 Go to Home Screen >Target Train 17.6.2 Target Train is a cloud based program which enables you to set fitness goals and track progress up to the minute with its real-time connection with the CircleFit wellness app. 17.6.3 Please login or sign up to continue. 17.6.
17.7 Go to Home Screen >Target Train > Setting Page 17.7.1 Choose one of the following as your fitness target. 17.7.1.1 Distance : Set a distance target along with a desired completion date. Come back to do workouts in order to achieve this target. 17.7.1.2 Calroies: Set a calorie target along with a desired completion date. Come back to do workouts in order to achieve this target. 17.7.1.3 Exercise Frequency: Set a frequency target along with a desired period of time.
17.8.1 Record data type 17.8.1.1 Choose from Running, Biking, Elliptical to record progress by equipment type. Alternatively, you can tap All to record all types of workouts regardless of equipment type. 17.8.1.2 Target Distance • Tap the blank field to display the keypad to input your target distance. • Setting range: 5 – 999 miles 17.8.1.3 Start Date • The day when you set your target distance. This value cannot be changed. 17.8.1.
17.10 Go to Home Screen >Target Train > Setting Page (Exercise Frequency) Tap anywhere on the screen to go back to Setting page. 17.10.1 Exercise days per week • Tap a number from 1 to 7 to choose how may days per week you wish to exercise. 17.10.2 Start Week • This is the week when you set your target exercise frequency. This value cannot be changed. 17.10.3 End Week • Tap the blank field next to End Week and select a desired end week on the displayed calendar. 17.10.
17.11 Go to Home Screen >Target Train > Setting Page (Weight) Tap anywhere on the screen to go back to Setting page. 17.11.1 Current Weight • Tap the blank field next to Current Weight. • Setting range: 75-485lbs 17.11.2 Target Weight • Tap the blank field next to Target Weight. • Setting range: 75-485lbs 17.11.3 Start Date • The day when you set your target calories. This value cannot be changed. 17.11.
17.12 Go to Home Screen >Target Train > Setting Page (Body Fat %) Tap anywhere on the screen to go back to Setting page. 17.12.1 Current Body Fat % • Tap the blank field next to Current Body Fat %. • Setting range: 2-50% 17.12.2 Target Body Fat % • Tap the blank field next to Target Body Fat %. • Setting range: 2-50% 17.12.3 Start Date • The day when you set your target calories. This value cannot be changed. 17.12.
My Performance is integrated in our cardio equipment, outdoor fitness apps or wearable devices together to give you the best personal fitness performance information. 17.13.2 Session 17.13.2.1 Track your cardio equipment usage, outdoor fitness apps and wearable devices to bring you a detailed breakdown of your work history. 17.13.2.2 Tap to add or delete a session. 17.13.3 Month 17.13.3.
17.14 Go to Home Screen > My Performance 17.14.1 Tap to share your fitness achievement via Facebook, Twitter, Instagram, or Weibo with your friends.
17.15 Body Manager 17.15.1 Go to Home Screen > Body Manager 17.15.1.1 Body Manager is designed to measure and track your body fitness via Circle Fitness IBA/ InBody 570 and CircleFit wellness app. 17.15.1.2 Please login to continue. (Refer to “Section 13.5 Circlecloud Go Sign Up” if you do not have an account.
17.15.1.3 Key Measurements from Circle Fitness IBA or Inbody 570 measured are the most important metrics for your fitness wellbeing. • For Circle Fitness IBA: Weight / Body Fat % / BMI / BMR / Total Body Water / Visceral Fat Rating /Bone Mass • For Inbody 570: Weight / Body Fat % / BMI / BMR / Total Body Water / Visceral Fat Rating / Bone Mass / Intracellular Water / Extracellular Water / Protein / Minerals / Waist-Hip Ration / Obesity Degree 17.15.2 Key Measurement – Muscle Mass and Body Fat % 17.15.2.
17.15.2.2 Tap Menu then tap Body Manager to track your body fitness during the workout. 17.16 My Gym 17.16.1 Go to Home Screen >My Gym This feature requires users to login. (Refer to “Section 13.5 Circlecloud Go Sign Up” if you do not have an account.) 17.16.1.1 Tap the left and right arrows to browse through available classes on different dates 17.16.1.2 Bulletin / Class / My Class Information • Tap Bulletin / Class / My Class to check out latest information released by club owners. 17.16.1.
17.17 My Workout 17.17.1 Go to Home Screen >My Workout >Setting Page This feature requires users to login. (Refer to “Section 13.5 Circlecloud Go Sign Up” if you do not have an account.) 17.17.2 Create Workouts 17.17.2.1 The first time you enter My Workout, you will see the workout setup page, as shown above. 17.17.2.2 Tap Create your workout button to establish your personalized workout and save it for future use. 17.17.2.3 Tap the plus icon to create more workouts. 17.17.2.
17.17.3 Go to Home Screen >My Workout >Workout Page Workout Information Displayed 3 Slide Bars ○ 1 Operation buttons ○ Increase/Decrease 2 arrow buttons ○ 17.17.3.1 Workout Information • There are three types of representations for users to view their workout information. • The default displayed workout information is the profile view of the workout, as shown above. • Tapping on Simple and Lap will show another two views on the current workout, as shown below.
17.18 Go to Home Screen > My Workout > Setting Page > Workout Page > Summary Page 17.18.1 Workout Information 17.18.1.1 Your workout information is displayed in Summary Page and will be uploaded to CircleCloud Go. 17.18.2 My Workout readouts • My Workout: displays the workout mode. • Duration (Time): The total accumulated time during your workout. • Total Strides: The total accumulated distance mile (or kilometer) during your workout. • Calories: The total accumulated calories burned during your workout.
YouTube Go to Home Screen > YouTube During workouts, users can turn on YouTube channels to view desired videos if the console isconnected to available Wi-Fi network. Control Buttons Control Buttons Press the White translucent ball (control button ) to spread out all the functions and the function menu will auto reel back after 3 seconds if no one else changes the operation.
Netflix and Spotify Go to Home Screen > Netflix or Spotify During workouts, users can turn on Netflix to view desired videos or turn on Spotify to listener to music with login account if the console isconnected to available Wi-Fi network。 Control Buttons Control Buttons
18.1 Software Installation 18.1.1 Manually Update or Using Online Update for Firmware and Software 18.1.1.1 Upgrade Files for each machine model respectively are as shown in below link, please download and save file in same root directory of USB stick So far, the latest version is 10_79 once updated.(Firmware version #10 / Software version #79) ⚫ 1-stop-upgrading file : https://drive.google.com/drive/folders/18685XrTve-iljcY89BBs9boO2Os2mqX4?usp=sharing 18.1.2 Software and Firmware update 18.1.2.
“Select a home app” will display as Picture 4 below, select PFhomelauncher and press “Always” as Picture 5 below. Picture 3: Picture 4: Picture 5: 18.1.3 Check Software and Firmware Version Number 18.1.3.
To define from now on, once machine online, need to do manually update (need click “update now” each time) To define from now on, once machine online, machine to download and install automatically, only need to choose and perform once then system will memorize the setting and perform once machine online and update file available.
• • During V22 upgrading to V23, you will see a screen message of “Superuser Request ” displays. Choose the “REMEMBER CHOICE FOREVER” and press “Allow,” if you are upgrading from V23 on, then the “Superuser Request ”will NOT display. The updating status will be showed on AM at the same time. • APP will report the latest status of update progress to AM when updating.