Brezza Dual Oscillating 10” Desk Fan Model No: OZF6 INSTRUCTION MANUAL AND WARRANTY Copyright 2013, Ozeri
Important Safety Instructions Thank you for purchasing the Ozeri Tabletop Air Circulator. This product has passed extensive quality assurance tests for residential use. Every care has been taken to ensure that it reaches you in perfect condition.
Do not force your fingers through the front case. Do not allow any foreign objects through the front case. This product is not a toy. Do not allow children to tamper with the fan. Be careful not to allow hair, curtains, tablecloth, clothes or other nearby objects block the airways of the fan or to enter the the openings of the fan. This can cause damage and/or injuries. Do not use this or any fan if the cord is found to be or becomes damaged.
Overview of your Fan: 1 1. Carrying Handle 2 2. Frontal Cover 7 3 3. Blades 4. Side Bracket 4 5. Remote Control Storage 6. Control Panel 7. Fan Base 5 6 Fan S Model #:…………………………………………….………….OZF6 Rated Voltage:…………………………………………...120V/60Hz Wattage:………………………………………………………. . 55W Net Weight…………………………………………………...... 6 lbs Airflow at Quiet Setting (1).………………………………….... 9 fps 2 3 8 21 4 Operating Instructions: QUIET TIME 1. Please ensure the fan is OFF and placed on a dry level surface. 2.
4. Press the OSC (L/R) button to activate automatic left and right oscillation. Press the OSC (U/D) button to activate automatic up and down oscillation. The indicator lights above their respective buttons will illuminate when on. For maximum air distribution across the greatest area, activate both L/R and U/D oscillation. 5. The following are the air speeds for both Oscillation and NonOscillation Modes: a. 0 = Quiet c. 2 = Medium b. 1 = Low d. 3 = High 6.
Moderating Temperatures: The Ozeri Air Circulator can help distribute cooler air from or near your air conditioner, and warmer air from or near your heater, by creating a energy usage. IN THE SUMMER : To circulate cool air, position the fan near an open window exposed to cooler outside temperatures, or to an air conditioning unit. Since hot air rises, engage dual oscillation to automatically direct the cool air from the fan into circulation.
Manually Setting the Vertical Angle: 1. To manually adjust the vertical angle of airflow, turn on the fan and activate the Up/Down button for automatic vertical oscillation. 2. When the fan reaches the desired vertical angle, press Up/Down button to deactivate the automatic vertical oscillation. The fan will remain at this vertical angle. 3. Never attempt to adjust the left/right or up/down angle of the fan manually or by force. Doing so will damage the fan and void the warranty. 4.
WARNING: DO NOT HANG OR MOUNT THIS FAN ON CEILING. DO NOT OPERATE THIS FAN IN OSCILLATION MODE WHEN IT IS WALL MOUNTED. Cleaning: 1. Always disconnect the cord from the electrical outlet before cleaning your fan. 2. Dust may be removed by using a vacuum cleaner along the back of the fan where the plastic grille covers the air intake, and along the 3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft dry cloth before operating the fan. 4.
WARRANTY INFORMATION Your Ozeri Fan is warranted to the original owner for 1 year from the date of purchase against defects in material and workmanship under normal use and service. Should your Ozeri Fan prove defective within 1 year from the date of purchase, return the defective product, freight prepaid along with an explanation of the claim to “Ozeri.” Please pack your Ozeri Fan carefully to avoid damages in transit.