Installation Instructions

BODYBAR + RUSH
EASY INSTALLATION
INSTRUCTIONS
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
or
775-420-5600
LIVE CHAT:
www.oxygenics.com
EMAIL:
[e-mail]
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
USING THE DIVERTER
To change the shower spray: Place your index finger
on one lever and your thumb on the other lever and
rotate either clockwise or
counter clockwise
(depending on the
current position) until
you feel it click
into place.
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.
HOW TO SWITCH
SPRAY SETTINGS
The easy spray selector
allows you to click with
ease to your desired
spray setting.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted into both hose
ends for proper installation.
WARNING:
ADHESIVE IS EXTREMELY STRONG
AND WILL STICK ON CONTACT
Oxygenics is not responsible for any injury or damage
resulting from improper installation, use,
or removal of the BodyBar.
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 5
Thoroughly clean
area where the
BodyBar will be
applied.
STEP 3
Screw the diverter
clockwise onto the
taped portion of
the shower arm.
Wrap plumber’s
tape 3 turns around
threaded ends of
the diverter.
STEP 7
Place BodyBar in
desired location
within shower. Press
and hold firmly
in place for 30
seconds.
STEP 2
Remove any
remnants of old
plumber’s tape
and flush out
shower pipe for
5 to 10 seconds.
Wrap plumber’s
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
STEP 6
Carefully remove
covering from
adhesive strips. Use
caution as adhesive
is extremely
powerful.
STEP 4
In a clockwise
direction, screw
fixed unit onto the
taped portion of
the diverter and
hand tighten.
STEP 8
Attach end of
hose to diverter
and hand tighten.
Attach other end
of hose to BodyBar
and tighten.