Copyright and Disclaimer GW-300R Wireless 2T2R 300Mbps Giga Router User’s Manual 1 AirLive GW-300R User’s Manual
Copyright and Disclaimer Copyright & Disclaimer The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies.
Copyright and Disclaimer CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B. The specification is subject to change without notice.
Table of Contents Table of Contents 1.Introduction ........................................................................................................................ 1 1.1 Packing List ............................................................................................................. 2 1.2 Spec Summary Table............................................................................................... 3 1.3 Hardware Configuration.............................................................
1. Introduction 1 1.Introduction Congratulations on your purchase of this outstanding Wireless Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual.
1. Introduction 1.
1. Introduction 1.2 Spec Summary Table Device Interface Ethernet WAN RJ-45 port, 10/100/1000Mbps, auto-MDI/MDIX 1 Ethernet LAN RJ-45 port, 10/100/1000Mbps, auto-MDI/MDIX 4 Antenna 3.23 dBi detachable antenna 2 WPS Button For WPS connection 1 Wireless To enable or disable Wireless Radio Enable/disable LED Indication Power Jack Power/Status / WAN / LAN1 ~ LAN4/ WiFi DC Power Jack, powered via external switching power adapter 1 Ɣ 1 Wireless LAN (WiFi) Standard IEEE 802.
1. Introduction Environment & Certification Package Information Package dimension (mm) Package weight (g) Operation Temp. Temp.: 0~40oC, Humidity 10%~90% non-condensing Ɣ Storage Temp. Temp.: -10~70oC, Humidity: 0~95% non-condensing Ɣ EMI Certification CE/FCC compliance Ɣ RoHS RoHS compliance Ɣ 1.
1. Introduction 1.4 LED indicators LED status Description Status Green in flash Device status is working.
1. Introduction 1.5 Procedure for Hardware Installation Step 1. Attach the antenna. 1.1. Remove the antenna from its plastic wrapper. 1.2. Screw the antenna in a clockwise direction to the back panel of the unit. 1.3. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception. 1.Turn off the Power Switch first.
1. Introduction Step 3 Insert the Ethernet patch cable into Wired WAN port: Insert the Ethernet patch cable form DSL Modem into Wired WAN port on the back panel of Router. Step 4. Power on Router: 4.1. Connect the power adapter to the receptor on the back panel of your Router and Push Power switch Step 5. Complete the setup. 5.1. When complete, the Status LED will flash.
2. Getting Start 2 2.Getting Start Insert the CD into CD reader on your PC. The program, AutoRun, will be executed automatically. And then you can click the Easy setup Icon for this utility. Configure the settings by the following steps. 2.1.Select Language then click “Next” for continues.
2. Getting Start 2.2 Setup mode You can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router. 2.3 Advanced mode Setup. Check the PC, Router or Internet icons for the Status of PC, Router or Internet.
2. Getting Start 2.4 Quick Wizard Install mode Setup 1. Make sure the router is powered on. 2. Make sure your network adapter is connected to the LAN port of the router 3. Make sure your network adapter has an IP address. Click “Next” for continues 2.5. Wireless Setting. Key in the SSID, Channel and Security options, and then click “Next” for continues.
2. Getting Start 2.6 Auto Detect WAN Service. Click “Next” for continue. Click the button, “Let me select WAN service by myself”, to disable this function. Note: The Item supports to detect the Dynamic and PPPoE WAN Services only Example, the Dynamic WAN type is detected.
2. Getting Start 2.7. Manual select WAN Service In the manual mode, Click the any icons for continues. 2.8 Summary of the settings and Next to “Reboot” Click “Next” for continue. 2.9 Apply the Settings or Modify. Click “Next” for continue.
2. Getting Start 2.10 Test the Internet connection. Test WAN Networking service. Click “Next” for continue. You can ignore the by select the “Ignore Test”. 2.11 Setup Completed. The EzSetup is finish, you can open the default web browser to configure advanced settings of the Router. Click “Finish” to complete the installation.
3. Making Configuration 3 3.Making Configuration This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Mozilla Firefox or or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms.
3. Making Configuration 3.1 Login to Configure from Wizard Type in the IP Address (http://192.168.1.254) Type password, the default is “airlive” and click ‘login’ button. Press “Wizard” for basic settings with simple way. Press “Next” to start wizard.
3. Making Configuration Step 1: Set up your system password. Step 2: Select Wan Type. Auto Detecting or Setup Manually.
