User's Manual

P1
Português
PT
Noticia Importante:
O modo wireless padrão é : modo "AP"
O endereço IP padrão é 192.168.100.252
Por defeito a subnet mask é 255.255.255.0
O nome utilizador padrão é: admin
A palavra-chave padrão é: airlive
O SSID padrão é: airlive
Certifique-se por favor de instalar a antena antes do power-on (ligar
à energia). Caso contrário, o rádio pode ser danificado.
Login Gestor Web para Configurar o AP60
1. Instale por favor a antena no AP60.
2 .Conecte o seu PC em qualquer porta LAN por cabo Ethernet.
3 .Conecte o power jack na porta power.
4 .Aguarde 1 minuto para o AP60 terminar o reboot.
5 .Por favor defina o endereço do seu PC para 192.168.100.x (ou outro
endereço dentro da mesma sub-rede)
6 .Digite o endereço IP do AP60 no explorador web para entrar no login
do Gestor Web.
Configurar o AP60 com o setup wizard
1. Login Gestor web e seleccione o idioma no topo da barra de idiomas.
(Figura A)
2. Clique em “Setup Wizard” em Wireless Settings. (Figura B)
3. Selecione Modo Wireless: O modo de operação por defeito é AP.
Quando o modo estiver seleccionado, à uma confirmação em baixo e à
esquerda da ilustração. Por favor escolha o modo e clique “Next”.
(Figura B)
4. Wireless Settings: Configure as Definições Wireless para recursos
avançados e clique “Next” depois de terminar.
5. WAN Settings: Configure as definições WAN, e seleccione o tipo WAN
de acordo com seu ISP. Se você não tiver a certeza qual o seu tipo
WAN, consulte por favor o seu ISP para obter mais informações. Note
por favor que a Porta WAN é apenas exibida nos modos WISP Router
e AP Router.
6. Quando as configurações estiverem finalizadas, clique “Finish” para
que as novas configurações tenham efeito.
Configure AP60 com IP Finder
Você pode encontrar o IP Finder através do CD fornecido e por favor
instale-o no seu computador. Depois, você pode usá-lo para encontrar o
AP-60 na sua rede. Por defeito o nome utilizador é admin, e a palavra
chave é airlive.(Figura C)
Para mais informações, leia por favor o manual de instruções no CD.
A B C
NoteBook
NoteBook
AP60
Neste modo, o AP irá actuar como um hub central
para a rede wireless.
Assistente
Configuração
Assistente
Configuração
Assistente
Configuração
Barra de Idiomas
Barra de IdiomasBarra de Idiomas
AirLive AP60-SA
Wireless-N PoE Access Point
Quick Setup Guide
Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
Wireless-N PoE Access Point
AirLive AP60-SA
Manufacturer/Importer
OvisLink Corp.
5F, No.6, Lane 130, Min-Chuan Rd., Hsin-Tien Dist.,
New Taipei City 231, Taiwan
Signature：
Name：Albert Yeh
Position/ Title : Vice President
Date：2011/07/20
Place : Republic of China (Taiwan)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B&C
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interferences when the equipment is
operating in a commercial area. This equipment generates, uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause
interference in the transmission of radio communications. If operating in a residential
area, it is probable this equipment will cause harmful interference, in which case the
user will be required to try to correct this interference using his own means.
Tested To Comply
With FCC Standards.
FOR HOME OR OFFICE USE
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.