Owner’s Manual Model number FMPPC2C Series number 870 D.870.000.V1 FMI BRANDS INC. 107 – 19052 26 Avenue | Surrey, B.C.
Owner & Safety Manual Model number FMPPC2C, Series Number 870 - Tested by CSA International DANGER: If you smell gas: 1 Shut off gas to the appliance. 2 Extinguish any open flame. 3 If odour continues, keep away from the appliance and immediately call your gas supplier or fire department. WARNING: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. Disconnected cylinders must have threaded valve plugs tightly installed and must not be stored in a building, garage or any other enclosed area. The gas pressure regulator provided with this appliance must be used, and must be the same model as supplied with the unit.
Owner & Safety Manual All LP cylinders to be used with this appliance must be: a. Constructed and marked in accordance with the specifications for LP-gas cylinders Standard, CAN/CSA B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods. b. Provided with a listed overfilling prevention device. c. Provided with a cylinder connection device compatible with the connection for outdoor cooking appliances. d.
LEAK TEST: 1. DO NOT USE OR PERMIT SOURCES OF IGNITION IN THE AREA WHILE DOING THE LEAK TEST. THIS INCLUDES SMOKING. 2. Leak testing should be done once per year or whenever the LP gas cylinder or any other gas system part is taken apart, serviced or replaced, whichever is more frequent. 3. Ensure all gas system coupling joints are tight and properly attached. 4. Prepare a leak testing solution of half liquid detergent and half water. 5.
Owner & Safety Manual SECTION 1: ASSEMBLY STEP 1 Enclosed are four bags of rocks, one factory installed 10' propane-rated hose with attached regulator, one propane tank stabilizer ring, one lid and one carry strap. STEP 2 Remove plastic bags containing the rocks, propane stabilizer ring and cover and carry kit. STEP 3 Open the two bags containing mid-sized rocks, labelled conveniently for you “M” and arrange in burner area.
SECTION 2: IGNITION (continued) STEP 3 Extend hose to full length and ensure that the propane tank is as far as safely possible from the Firebowl and place the tank in the included stabilizer ring. STEP 6 Your firebowl is equipped with an auto spark ignition. Push the knob in and slowly turn counter-clockwise to the high position. The ignitor will spark and ignite the gas.Should the appliance fail to ignite on the first try, promptly repeat the ignition attempt within 5 seconds.
Owner & Safety Manual SECTION 4: EXTINGUISHING THE APPLIANCE STEP 1 Turn cylinder valve to the “Closed” position. STEP 2 Turn appliance valve to the “Off” position by pushing and turning knob clockwise. STEP 3 Allow unit to cool for at least five (5) minutes before relighting. SECTION 5: FIREBOWL MAINTENANCE Your Outland Firebowl® requires periodic maintenance to keep it in good running order.