User's Manual

ManualsBrandsOUTFORM SMART TECH ManualsElectronicsNFC Module

NFC Module User manual

Model:20E0205-A01-E003

Brand:OUTFORM

KEY FEATURES

●USB Full-NFC solution (R/W, P2P, HCE) to connect to the mainstream

environments (Android, Windows

, Linux,

MacOS)

●Integrated RF level detector

●No

Drivers required

●HW solution (PN7150+LPC11U24) with

very small footprint

Product description

NFC

USB Dongle is an NFC Reader-Writer based on NXP’s PN7150

high-performance full NFC controller, supporting all NFC Forum modes.

The USB NFC Dongle is powered through USB connector. Its operating

frequency is 13.56MHz.

This NFC controller supports all NFC Forum communication modes like

peer to peer, reader/writer and Host Card Emulation. It allows interacting

with all NFC devices on the market according to NFC Forum: from simple

NFC tags to NFC-enabled smartphone.

HOW IT WORKS

NFC USB Dongle can be set to behave either as an NFC reader, or a

tag, or to establish a two-way connection with another NFC device.

NFC USB Dongle features an LPC11U24 MCU which works in

Summary of content (4 pages)

PAGE 1
NFC Module User manual Model:20E0205-A01-E003 Brand:OUTFORM KEY FEATURES ●USB Full-NFC solution (R/W, P2P, HCE) to connect to the mainstream OS environments (Android, Windows, Linux, MacOS) ●Integrated RF level detector ●No Drivers required ●HW solution (PN7150+LPC11U24) with very small footprint Product description NFC USB Dongle is an NFC Reader-Writer based on NXP’s PN7150 high-performance full NFC controller, supporting all NFC Forum modes. The USB NFC Dongle is powered through USB connector.
PAGE 2
conjunction with the PN7150. The USB interface is provided by NXP’s LPC11U24 MCU, and the NFC functionality is ensured thanks to PN7150. NFC is designed to be intuitive for users. Communication between two devices is established in the simplest way possible — by bringing them close to each other. NFC frontends can operate in three distinct modes: 1．Card emulation mode — where USB NFC Dongle behaves like a smart card or a tag. In this mode, NFC USB Dongle emulates an NFC tag.
PAGE 3
between a pair of NFC-enabled devices. When a user brings two devices close to each other, the two NFC chips establish a P2P connection and exchange data. PN7150 FEATURES Optimized for fast design-in, NXP’s PN7150 high-performance NFC controller is fully compliant with the NFC Forum. PN7150 embeds a new generation RF contactless front-end supporting various transmission modes according to NFCIP-1 and NFCIP-2, ISO/IEC14443, ISO/IEC 15693, MIFARE and FeliCa specifications.
PAGE 4
Disclaimers Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.