Installation Guide

TRELLIS MOUNT KIT
Contents:
(4) 9/16” Phillips Screws
(4) 1-1/4” Phillips Screws
(4) Plastic Anchors
(4) Metal Brackets
2801 East Beltline NE, Grand Rapids, MI 49525
©2020 UFP Retail Solutions, LLC. All rights reserved. Outdoor Essentials
is a registered trademark of UFP Industries, Inc. 13456_12/20
410200
TRANSFORM YOUR OUTDOORS
Installation instructions also available on
OutdoorEssentialProducts.com
1
Mark the trellis bracket locations.
3
Attach the trellis to the brackets.
9/16" screw
2
Attach the brackets to the fence or
wall on each mark.
* If using an anchor, predrill a 1/4" hole,
1-1/2" deep.
Use anchor if needed.*
1-1/4" screw
• Pencil
• Power drill with 1/4" Phillips bit
• 1/4" Masonry bit (if needed)
TOOLS NEEDED