Instructions / Assembly

INSTALLATION INSTRUCTIONS
Please read entire instruction sheet before you begin.
Follow these instructions and recommendations to install posts within warranty, and to avoid product damage.
Illustrations not to scale.
Black Posts and Channels
rendered in gray.
Posts
Black powder-coated galvanized steel
(Fig. 1)
.
Posts designed to be installed with min. 75" above ground
if used with OUTDECO USA Panel or Slat Fence Kits
(Fig.2)
.
Pre-drilled Post holes align with the slots in all OUTDECO
USA Panel Frame and Slat Fence Kit Channels for quick and
easy installation with no measuring
(Fig.3)
. (See Kit installation
instructions.)
Posts are pre-drilled on 3 sides allowing for linear or
90
°
corner congurations
(Fig. 4)
.
Panel Frame & Slat Fence Kit Channels
(Sold separately.)
All Channel sizes have slots that directly align with
pre-drilled Post holes for easy installation
(Fig. 3)
.
Panel Frame Kits: Available in 24" x 48" or 36" x 72" Kits
for Design-Vu and Modinex Decorative Panels; and
24" x 48" or 48" x 70" Kits for Outdeco Decorative Panels.
Slat Fence Kit: Channels adjust to t Slats ½" to 1" thick.
Suitable for
pro builders
and DIY crafters.
96" In-Ground Posts
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN:
We recommend following best building
practices for installing OUTDECO USA Steel Posts and Frames in accordance with their intended purpose. Examples
shown in this document are installation suggestions. Adjust installation congurations to meet your specic project
requirements. If in doubt, consult a professional. We recommend checking with proper authorities about building
codes/standards that may apply to your project. The OUTDECO USA Post & Frame System has a 5-Year Limited
Warranty for material integrity when installed per these instructions. Installers assume responsibility for the
installation. (See full warranty at
outdeco.com/post-frame
.)
System Components & Features
36" Channel
48" Channel
Pre-drilled Post
72" Channel
24" Channel
Fig. 3
Fig. 1
96" Post
Fig. 2
Above Ground:
Min 75"– Max 78"
Below Ground:
Min 18"– Max 21"
INSTALLATION EXAMPLES
1 - 24" x 48"
Frame Kit
2 - 36" x 72"
Frame Kits
1 - 36" x 72"
Frame Kit
1 - 72" Slat Kit 2 - 72" Slat Kits
Fig. 4
Corner Installation
IMPORTANT!
Use proper methods for digging and preparing
post holes for your terrain and earth composition.
Check underground services and features
before digging.
Follow best building practices for setting posts in
concrete. If in doubt, consult a professional.
WHAT'S IN THE BOX
1 Post –
Black powder-coated galvanized steel; for in-ground installation
1
Poly Post Cap
12
Poly Post Hole Plugs
WHAT YOU'LL NEED
Tape
Measure
Long Level
2x4
5" Longer than
Panel or Slat Width
Fast-
Setting
Concrete
outdecousa.com
Metal & Wood Panels, WPC Slats,
Posts, Frame & Slat Kits
modinexpanels.com
WPC Panels,
Posts, Frame Kits
design-vu.com
Poly Panels,
Posts, Frame Kits
See all OUTDECO USA

info on our websites.
08-23

Summary of content (2 pages)