User Instructions

Table Of Contents

G32 MCU Function description

V02 2021.08.19 HZ

① Wi-Fi Touch Button / LED Indicator

② Bluetooth (BLE) Touch Button / LED Indicator

③ Gas Stock Indicator

④ Photodiode

⑤ Antenna Window

⑥ Meat Probe Sockets 3#,4#

⑦ Meat Probe Sockets 1#,2#

⑧ Main Power Switch

A. Standby Mode：

Condition: Power on and self-check passed.

Operation Function LED Indication Beep

Press ⑧

Power On

Standby wait for further

operation

Wi-Fi ① Off

BLE ② Off

Gas Stock ③ : see E

B. Wi-Fi Function：

B1. Wi-Fi Configuration

Condition: in Standby mode

Operation Function LED Indication Beep

Press Wi-Fi ① 5S~10S Wi-Fi Configuration

Wi-Fi ① flash in 2Hz

BLE ② Off

Gas Stock ③ : see E

2 beeps @2s/5s

Device (MCU) switch to AP mode, the grill will be a Hot Spot and can be found in the Wi-Fi list of Mobile devices

Follow the Instruction in APP to finish the Wi-Fi Configuration (provide SSID and Password)

Quit Mechanism / Output:

PAGE 1
G32 MCU Function description V02 2021.08.19 HZ ① Wi-Fi Touch Button / LED Indicator ② Bluetooth (BLE) Touch Button / LED Indicator ③ Gas Stock Indicator ④ Photodiode ⑤ Antenna Window ⑥ Meat Probe Sockets 3#,4# ⑦ Meat Probe Sockets 1#,2# ⑧ Main Power Switch A. Standby Mode： Condition: Power on and self-check passed.
PAGE 2
• • Time out (150s) or Configuration not succeed: quit to A. Standby Mode Success Configurated: go to B3. Wi-Fi Data Transfer • Press Wi-Fi① 5-10s, quit to A. Standby Mode B2.
PAGE 3
C2. BLE Data Transfer Condition: in Standby mode, BLE Configuration has been done. Operation Function LED Indication Press BLE ② 5S~10S BLE Configuration Wi-Fi ① Off BLE ② flash in 2Hz Gas Stock ③ : see E Beep No Device (MCU) switch to AP mode, the grill will be a Hot Spot Follow the Instruction in APP to finish the Wi-Fi Configuration (provide SSID and Password) Quit Mechanism / Output: • • Connection lost/Time out: quit to A. Standby Press BLE② 5-10s, quit to A. Standby Mode D.
PAGE 4
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.