User's Manual

4”
2”
PMS 109
Process Black
Step 1
Step 2
Final
POWER BANK
POWER BANK
6”
Project Name: INSERT CARD POWER BANK QUICK START GUIDE
Date: 4.28.2020Part #: 20-55265 Rev: A
Colors Coatings and Treatments: Notes:
Accordian Fold
Dieline and material shall follow: 23-84697
Designer: Rowell
Confidential property of Otter Products LLC
Reproduction and unauthorized use is prohibited
Otterproducts LLC:
209 South Meldrum Street,
Fort Collins,CO 80521
NOT FOR PRINT -
FOR REFERENCE ONLY
Dielines-
do not print
Folds-
do not print
POWER BANK
QUICK START GUIDE
OBFTC-0087-A
20-55265_A
CUSTOMER SERVICE
18556887269
USA + Canada - Toll Free
[e-mail]
otterbox.com/support
COMPLETE USER MANUAL
MODE D’EMPLOI COMPLET
OTTERBOX.COM/SAFETY-INSTRUCTIONS
DE Gesamtes Benutzerhandbuch
IT Manuale Utente Completo ES Manual de Usuario
Completo PT Manual do Utilizador Completo
JA
ユーザーマニュアル KO 사용 설명서
ZHT 完整版使用者手冊 ZH 完整版用户手册
• 1 flashing LED – 0-10% capacity
• 1 solid LED – 10-25% capacity
• 2 solid LEDs – 25-50% capacity
• 3 solid LEDs – 50-75% capacity
• 4 solid LEDs – 75-100% capacity
FULLY CHARGE FOR FIRST USE
While charging display continually shows (Fig. 1):
• 1 flashing LED – < 25% capacity
• 1 solid LED, 1 flashing LED – 25-50% capacity
• 2 solid LEDs, 1 flashing LED – 50-75% capacity
• 3 solid LEDs, 1 flashing LED – 75-99% capacity
• 4 solid LEDs – 100% capacity
When not charging, press button to view
capacity (Fig. 2):
• No LEDs – 0% capacity
CHARGE DEVICES
Power bank automatically starts charging
most devices.
WIRELESSLY CHARGE DEVICES
(IF APPLICABLE)
Press button and place your device flat
on the side of the Power bank featuring the
OtterBox logo.
An orange light blinks while detecting your device
and stops blinking if the device is not detected.
The orange light blinks when a device is
connected and charging.
CARE & MAINTENANCE
Cleaning
1. Wipe with a dry cloth.
2. Do not use solvents, chemicals, cleaning
solutions, alcohol, ammonia or abrasives.
MANUFACTURER
Otter Products LLC
209 South Meldrum Street, 80521, Fort Collins,
Colorado, United States of America
IMPORTER
Otter Products EMEA
5thFloorHibernianHouse,80ASouth
Mall,Cork,Ireland.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
FIG. 1
FIG. 2
SERVICE À LA CLIENTÈLE
18556887269
É.-U. + Canada - Gratuit
[e-mail]
otterbox.com/support
Cet appareil est conforme à la section 15 des
réglementations de la FCC. Son fonctionnement
est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas causer d’interférenc-
es nuisibles ; (2) cet appareil doit accepter toute
interférence reçue, notamment les interférences
susceptibles d’occasionner un fonctionnement
indésirable.
g) Do not use the power bank that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
h) Do not disassemble the power bank. Take it to a
qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of fire
or injury to persons.
i) Do not expose a power pack to fire or excessive
temperature. Exposure to fire or temperature above
100°C may cause explosion. The temperature of 100°C
can be replaced by the temperature of 212°F.
j) Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
k) Switch off the power bank when not in use.
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY
TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using this product, basic precautions
should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is
necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended
or sold by power pack manufacturer may result in a risk
of fire or injury to persons.
f) Do not use the power bank in excess of its output
rating. Overload outputs above rating may result in a
risk of fire or injury to persons.
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation, Sciences
et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Radiation Exposure statement
This equipment complies with FCC/IC RSS-102 radiation
exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux
radiations FCC/IC CNR-102 établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec
une distance minimale de 20 cm entre le radiateur et votre
corps.