PRODUCT INFORMATION Pull-force measurement system 95100422PE_2020-09-22 // ENGLISH OTT-JAKOB Spanntechnik GmbH // Industriestraße 3–7 // D-87663 Lengenwang +49 83 64 / 98 21 -0 // +49 83 64 / 98 21 -10 // info@ott-jakob.de // www.ott-jakob.
PRODUCT INFORMATION Pull-force measurement system TABLE OF CONTENTS 1 1.1 1.2 SAFETY NOTES..........................................................................................................................5 INTENDED USE.........................................................................................................................5 BATTERY....................................................................................................................................5 2 2.1 2.2 2.3 2.
PRODUCT INFORMATION Pull-force measurement system PRODUCT COMPLIANCE EUROPE The product is compliant with the requirements of the RED Directive 2014/53/EU and the RoHS Directive 2011/65/EU. WEEE Notice Disposal instructions for waste electrical and electronic equipment This product contains batteries or rechargeable batteries that must be disposed of correctly after use. Use a certified waste management company to dispose of the old electrical and electronic equipment.
PRODUCT INFORMATION Pull-force measurement system USA FCC Statement 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
PRODUCT INFORMATION Pull-force measurement system 1 SAFETY NOTES Always consider the following points: Follow the operating instructions Avoid impacts and vibrations to the system The system may be operated only within the specified technical values and limits. Commissioning, adjustments and operation is allowed only by qualified personnel. In the cases of improper system adjustment or use, the OTT-JAKOB company will not accept any liability. 1.
PRODUCT INFORMATION Pull-force measurement system 2 PRODUCT DESCRIPTION 2.1 FUNCTION The pull-force measurement system POWER-CHECK measures the pull-force in power drawbars. The pull-force measurement system is embedded in the tool holder. The force occurring after the clamping process is detected by the measurement system. It is possible to use the measuring device in a tool magazine. The measuring device sends the measuring value to the receiving device. 2.
PRODUCT INFORMATION Pull-force measurement system 2.4 TECHNICAL DATA Accuracy class 2 % from max.-value of the measuring range Temperature range +15 °C to + 35 °C Force limit: 130 % from max.-value of the measuring range Break force 200 % from max.
PRODUCT INFORMATION Pull-force measurement system 2.5 VARIATIONS SK measuring range min. - max.
PRODUCT INFORMATION Pull-force measurement system 5,5 – 15,5 Weight [kg] 2,5 interface order number dimensions 267 SK40 9510392622V14 ISO7388-2-J40-30 ø63 measuring range min. - max.
PRODUCT INFORMATION Pull-force measurement system HSK Weight [kg] interface order number dimensions 126 1,5 – 4,5 0,25 HSK25 ø25 measuring range min. - max.
PRODUCT INFORMATION Pull-force measurement system PSC measuring range min. - max. [kN] Weight [kg] interface order number dimensions 186 2,0 PSC63 9510392722V92 ø63 20 - 40 30 - 55 2,8 measuring range min. - max.
PRODUCT INFORMATION Pull-force measurement system 3 OPERATION The POWER-CHECK is a precision instrument Please handle with care! Spindle rotation with the measuring device is not allowed! Measuring conditions: the following requirements must definitely be fulfilled in order to get accurate measurements observe measuring range: → VARIATIONS # 2.5 // 8 temperature range: +15 °C to + 35 °C It is possible to use the measuring device in a tool magazine.
PRODUCT INFORMATION Pull-force measurement system 4 MAINTENANCE 4.1 MAINTENANCE Inspection by OTT-JAKOB yearly after a fall or a similar incident 4.2 BATTERY The battery charge can not be controlled. Therefore, an annual maintenance is recommended. If the battery is empty, the value 3276,7 kN is sent. The POWER-CHECK contains a solid-state, non-replaceable Li/SOCl2 battery. The battery must be replaced only by the equipment manufacturer.
PRODUCT INFORMATION Pull-force measurement system 5 RECEIVER (not included in delivery volume) 5.1 INTERFACE USB RADIO STICK The receiver Interface USB-Radio-Stick is equipped with a USB interface. It receives the data that the POWER CHECK sends. The measuring values can be graphically displayed, logged and exported by the PC software (via a USB interface).