Trademarks OTOFIX is a trademark of Autel Intelligent Technology Corp., Ltd., registered in China, the United States, and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Autel Intelligent Technology Corp., Ltd.
Safety Information For the safety of yourself and others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual should be read and understood by all persons operating or coming into contact with the device. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual.
When your equipment reaches its service life, dispose of it in accordance with local environmental laws and regulations. Some internal parts may explode, leak or have adverse environmental effects if not handled properly. Electronic Device Do not use this device in places where the use of wireless devices is expressly prohibited, otherwise it will interfere with other electronic devices or cause other dangers. FCC Statement This device complies with Part 15 of the FCC Rules.
CONTENTS Safety Information................................................................................................. ii Safety Messages................................................................................................... ii Electronic Device..................................................................................................iii Using This Manual................................................................................................. 1 1.1 Conventions...............
.1 Measure the Heart Rate..............................................................................21 5.1.1 Measure the Heart Rate Continuously.............................................. 21 5.1.2 Measure the Exercise Heart Rate......................................................22 5.1.3 Measure the resting heart rate........................................................... 22 5.1.4 Heart rate notification........................................................................... 23 5.
Using This Manual This manual contains device usage instructions. The picture is only for reference, please make the object as the standard. 1.1 Conventions The following conventions are used. Bold Text Bold text is used to highlight items such as buttons and menu options. Example: Tap【OK】. Notes and Important Messages Notes A NOTE provides helpful information such as additional explanations, tips, and comments. Example: NOTE Pair the watch and your vehicle before the Smart Vehicle Key work.
Hyperlink Hyperlinks, or links, that take you to other related articles, procedures, and illustrations are available in electronic documents. Blue italic text indicates a selectable hyperlink and blue underlined text indicates a website link or an email address link. Illustrations Illustrations used in this manual are samples, the actual testing screen may vary for each smart watch being tested. Observe the menu titles and the on-screen instructions to make correct option selection.
Start Using OTOFIX Watch is a smart watch with a smart vehicle key function, which supports remote control of vehicles. It also provides multi-dimensional intelligent services, such as exercise status recording, health monitoring, music playing or storing and so on. This manual describes the structure and operation of the watch, and how to use it. IMPORTANT The smart watch comes with 4GB of memory and the available storage capacity is about 2.6GB because the system of watch will occupy some memory. 2.
To install the smart watch band Lay the smart watch flat with the back of the watch up, and the side with the buttons facing you. ①Insert the pogo pin on the watch band into the watch ear on the side near you ； ② Slide the metal buckle toward the side near you until it there is no space to move ； ③ Align another side of pogo pin into the another watch ear and install it. Repeat these steps to install another watch band. Figure 2.
Figure 2.3 Wear the Smart Watch Wear the smart watch as the picture show. Attach the Heart Rate Sensing Area to the wrist to maintain a comfortable and fit wearing state. In order to ensure the accuracy of heart rate measurement, please wear the smart watch correctly. Avoid to wear the smart watch on joints. Do not be too loose or too tight in normal status, but wear tight during exercise.
Figure 2.4 Smart Watch Buttons Table 2.1 Power Button Description Operation Function Locked screen：Short press to light up the screen. Short Press In the page of application list ： Short press to show the standby screen. In the page of standby screen ： Short press to show the access the application list. Power off: Long press for 2 seconds to power on. Long Press Power on: Long press for 5 seconds to show the shutdown or restart icon. Power on: Long press for 12 seconds to restart the smart watch.
Swipe the Screen to the Right or Left Swipe the screen to the right or left to switch between different interfaces. Swipe the Screen Right Swipe the screen to the right to return to the previous interface. In Normal Mode: Raise the wrist to brighten the screen and return to the standby screen. Raise Your Wrist You can also raise the wrist to brighten the screen and start the voice-recognition. In Sports Mode: Raise the wrist to displays the sports data interface.
When battery is running low, the smart watch is unable to power on. To power the smart watch off Method 1: Long press the【power button】, tap【Power off】. Method 2: Tap the【power button】to enter the application list＞ Tap ＞Swipe down the screen to choose【System】＞Click【Power off】. IMPORTANT When battery is lower than 5%, the smart watch power off automatically and can not be powered on. To reboot the smart watch Method 1: Long press the【power button】, tap【Reboot】.
When choose【Scan QR to add】, then scan the QR on the smart watch screen with your phone. When choose【Add by model】, then tap【OTOFIX watch】＞【Start Pairing】＞select your device＞start to match. When the match requirement appear on the smart watch, click【Pair】 then【OK】 to finish the match. To match the smart watch and phone with iOS system Download【Autel Link】App through the phone App market, or 【Autel Link】App QR.
Figure 2.6 Commonly Used Function 2.6 Do Not Disturb Mode After entering the 【 Do Not Disturb 】 mode, incoming calls and message reminders are forbidden, the alarm clock does not vibrate or ring, and the screen does not turn on when you raise your wrist. You can also set a regular 【 Do Not Disturb 】 time period, and the smart watch will enter the【Do Not Disturb】state on time. To set【Do Not Disturb】mode Tap the【power button】to light up the screen then swipe up to open the status bar and turn on .
To upgrade the Autel Link App Please update the【Autel Link】App in Android App Market or iOS App Store. NOTE You need to re-pair your phone and the smart watch after finishing the Autel Link App update. 2.8 Factory Reset To reset the smart watch Method 1: Tap the smart watch【power button】to enter the application list＞Tap ＞ 【Factory reset】＞【OK】. Method 2: Access the Autel Link App＞【Devices】＞Choose the connected smart watch＞【Reset】＞【OK】, tap 【OK】again when a pop-up appear on the smart watch.
The smart watch and the charging base and is not waterproof, please keep them dry before or in or after charging, or there are short circuits or other risks. The smart watch can be fully charged when the charging temperature is between 0 and 45 ℃ ; It can not be fully charged when the charging temperature is between 45℃ and 60℃.
Basic Functions 3.1 Notification After the smart watch is successfully paired with the Autel Link App, the message reminder from the phone will be synced to the smart watch. Therefore, the smart watch will vibrate to remind you when there is a new message in the status bar of the phone. You can swipe the screen down to view the content of the message. Each message supports one screen display. You can click the news to read it. Please follow these steps to set up a message reminder.
Tap the【power button】to light up the screen＞Swipe down the screen to check the news. Choose a piece of notification, you can swipe right to delete a single message, or click 【Delete All】at the bottom of the message list to clear all unread messages. 3.2 Make a Call After pair the smart watch and your phone successfully, there are three ways to make a call by smart watch.
To make a call through the smart watch 【Contacts】, the smart watch and the phone need to keep the normal connection. Up to 50 call records can be saved. In the 【Call Log】interface, swipe up to the bottom of the screen and click 【Clear All】to clear all existing call records. 3.3 Answer or Reject Calls When the smart watch and the phone are connected normally and there is an incoming call, the smart watch will vibrate to remind you and display the number or name of the caller.
To add some songs to the playlist Access the【Autel Link】App＞【Devices】＞Tap the connected smart watch＞【Music】＞【Music Management】＞create a playlist, input the playlist name＞【OK】. Tap the playlist＞Tap ＞【Add Music】, choose some songs＞ 【OK】. NOTE In the smart watch play music interface, you can choose list loop (default), single loop, random play.
Tap the【power button】to enter the application list＞Tap 【add Alarm】. ＞ Set the time ＞【OK】 ＞Set the repetition period of the alarm＞【OK】 ＞Set the【Delay Time】＞Tap【OK】to finish the set. Tap the existing alarm clock to edit or delete it. NOTE By default, it is a one-time alarm when the repetition period of the alarm is not set. The alarm clock only supports the default ringtone of the smart watch.
3.8 Use the Compass Tap the【power button】to enter the application list and tap to turn on the compass. Rotate the smart watch as prompted by the smart watch to complete the calibration. After the calibration is completed, the smart watch can display the compass dial, which can help u to tell the direction. 3.9 Check the Weather Information The smart watch can display the weather information of your current location. You can check the weather on the smart watch in the following two ways.
Basic Functions 4.1 Scientific Exercise The smart watch can record a variety of exercises, including walking, running, cycling, boating, climbing, rope skipping, yoga, boxing, dumbbells, etc. You can choose a favorable exercise according to different scenarios. In addition, you can also customize other types of exercise. To start the exercise Tap the【power button】to enter the application list＞Tap to start the exercise. Swipe up and down the screen to select different exercise types.
When the smart watch start to position itself, you can wait for the watch to complete positioning and click 【 Start exercise 】 , or directly tap 【 Start exercise】to start exercising. After a single exercise is over, please choose to end the exercise to avoid increased power consumption. 4.2 Activity Record The smart watch will display the activity energy consumption, exercise time, and standing time.
Health Management 5.1 Measure the Heart Rate The smart watch is designed with the heart rate sensing area, from which you can test your heart rate, to help you stay healthy in a scientific way. NOTE Once sleep status is detected, the smart watch will automatically switch to invisible light, try to avoid disturbing the user's sleep. 5.1.1 Measure the Heart Rate Continuously Intelligent monitoring Intelligently adjust the measurement frequency according to the exercise status, which helps to save power.
IMPORTANT In order to ensure the accuracy of heart rate measurement, please wear the smart watch normally, avoiding the joints, and try to wear it tightly during exercise, not too loose. Ensure that the heart rate monitoring area is close to the skin and not covered by foreign objects.
The resting heart rate can only be checked in the【Autel Link】App. If the resting heart rate display is a horizontal line "- -", this is the scenario where the smart watch does not reach the resting heart rate. At this time, please make sure to measure your resting heart rate in a quiet, inactive, and non-sleeping state. 5.1.
5.2 Sleep monitoring Wearing the smart watch to fall asleep, the smart watch will automatically recognize the moment when you enter sleep, exit sleep, sleep deeply, and sleep lightly. It can be synchronized to the【Autel Link】App to view your sleep details. The smart watch record the sleep cycle from 22：00 pm to 8：00 am on the next day, a total of 10 hours. The sleep data of the day can be displayed on the smart watch.
the application list＞Tap > 【Health】> 【Sleep】> Turn on 【Sleep reminder】switch> Set the sleep reminder time> 【OK】. 5.3 Breath Training Breathing training can help you relax in the stressful work or life and soothe your mood. To start the breath training Tap the【power button】to enter the application list＞Tap . Please wear your smart watch and keep your arms still, tap【Start】, then exhale and inhale according to the on-screen instructions. NOTE The training time is 1 minute by default.
NOTE For the accuracy of the measurement, please wear the smart watch normally and avoid the joints. Ensure that the heart rate sensing area is close to the skin and not covered by foreign objects, not wearing loosely. Keep your body still. The test range of blood oxygen measurement is 70%~100%. The duration of a single blood oxygen measurement is about 30 seconds. While measuring blood oxygen saturation, the smart watch will measure a single heart rate value.
Every day from 8：00 to 22：00, when you keep sedentary for over 1 hour, the smart watch will vibrate and pop up a stand reminder.
