User's Guide

TAG X 2R0
TAG-X Transceiver
The TAG X 2R0 Transceiver is an autonomous transceiver that is used primarily for the identification,
control and management of assets using RF (radio frequencies). The TAGs may be used in conjunction
with active base station receivers. The tag may be affixed to assets in order to perform data collection.
Description of the system;
The TAG system has been developped with the goal of providing the following services.
• Data transfer, logging and Telemetrie
• Temperature monitoring
• Humidity monitoring
• Automated inventory management
• Automated fleet management
TAG Trancsceiver Installation guidelines;
The TAGs must be installed by qualified personnel.
The housing must be affixed to a solid surface using materials that will prevent rattles and or (fall-off) .
The entire mating surface must be used in order to ensure a solid installation.
The housing must be installed on surfaces that will not rust over time.
Using the TAG transceiver;
PRIOR to initialization ensure that tags are installed according to installation guidelines. Upon initialisation
the tags will register on the network and create a secure connection. This is an automated process and
requires no interaction.
REMOTE (Re-start / Re-initialization);
The Re-start function is used primarily as a preventative measure. A clean Re-start is required in order to
flush all of the system buffers. The Re-initialization function is used in order to re-name and change a tag
ID.
USER GUIDE
• Reinforced
• Completely water tight
• Long service life
• Highly robust communication
protocol
• Easy to install