Product Info

ManualsBrandsOtodata Wireless Network ManualsElectronicsRemote Telemetry Communication Unit

U.S. patents and Foreign patents are pending on this product.

SMARTLID™ TANK

MONITOR

The NEW Worthington Industries

monitor-ready lid is designed to be more

resistant, fit better and accommodate

Worthington’s SmartLid™ tank monitor

under the lid.

200 OLD WILSON BRIDGE ROAD

COLUMBUS, OHIO 43085

P: 614.438.3013

Toll-free: 866.928.2657

CustomerServiceWorthingtonIndustries.com

WORTHINGTONINDUSTRIES.COM/SMARTLID

U.S. patents and Foreign patents are pending on these products.

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information go

to www.P65Warnings.ca.gov

TECHNICAL SUPPORT

CustomerserviceWorthingtonIndustries.com

Worthingtonindustries.com/Smartlid

Toll-free: 866.928.2657

Summary of content (7 pages)

PAGE 1
SMARTLID™ TANK MONITOR. The NEW Worthington Industries monitor-ready lid is designed to be more resistant, fit better and accommodate Worthington’s SmartLid™ tank monitor under the lid. TECHNICAL SUPPORT Customerservice@WorthingtonIndustries.com Worthingtonindustries.com/Smartlid Toll-free: 866.928.2657 WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.
PAGE 2
INSTALLATION INSTRUCTIONS MONITOR INSTALL 1 INSERT 2 SLIDE 3 SNAP 4 ROUTE MONITOR INSTALL - ON TANK 1 INSERT 2 SLIDE 3 SNAP 2 INSERT 3 SECURE 4 ROUTE LID INSTALL 1 PLACE 4 ROUTE NOTES: 1. When monitoring multiple tanks that are connected (2x420s, 3x420s etc.), it is important to connect the monitor to the tank that’s showing the lowest level. If they’re equal, you should monitor the tank with the regulator. 2. Make sure gauge is screwed on and fastened properly.
PAGE 3
INSTALLATION INSTRUCTIONS MONITOR REMOVAL MONITOR SPECIFICATIONS 1 REMOVE 2 PRESS 3 SLIDE INPUT RADIO SPECIFICATIONS Remote Ready Hall Effect Module, I2C, 4-20mAdc, 0-5 VDC, Temperature Technologies REPORTING & OUTPUTS Reporting Data Interface Automated Testing Tank level (5% variation) = Low battery High/Excessive draw Fill Detection Temperature API Email (to supplier and/or consumer) Raw data Online dashboard Client mobile app Network status Lead sensor status Battery status ELECTRICAL SPE
PAGE 4
INSTRUCTIONS DE MONTAGE MISE EN PLACE DU MONITEUR 1 INSÉRER 2 GLISSER 3 ENCLENCHER 4 DIRIGER MISE EN PLACE DU MONITEUR - SUR LE RÉSERVOIR 1 INSÉRER 2 GLISSER 3 ENCLENCHER INSÉRER 3 SÉCURISER 4 DIRIGER MISE EN PLACE DU COUVERCLE 1 PLACER 2 4 DIRIGER REMARQUES 1. Lors de la surveillance de plusieurs réservoirs connectés (2 x 420s, 3 x 420s, etc.), il est important de brancher le moniteur au réservoir dont le niveau est le plus bas.
PAGE 5
INSTRUCTIONS DE MONTAGE DÉSINSTALLATION DU MONITEUR CARACTÉRISTIQUES DU MONITEUR 1 DÉTACHER 2 APPUYER 3 GLISSER CONTACT SPÉCIFICATIONS RADIO Sonde de lecture «Remote ready», effet Hall, I2C, 4-20mAdc, 0-5 VDC, Température Technologies SORTIES DE DONNÉES ET RAPPORTS Relevés = Niveau du réservoir (variation de 5 %) Pile faible Consommation élevée ou excessive Détection de remplissage Température Interface de données Test automatisé API Courriel (au fournisseur ou au consommateur) Données brut
PAGE 6
INSTRUCCIONES DE INSTALACIÓN INSTALACIÓN DEL MONITOR 1 COLOQUE 2 DESLICE 3 ENCAJE 4 ENRUTE INSTALACIÓN DEL MONITOR - EN EL TANQUE 1 COLOQUE 2 DESLICE 3 ENCAJE 2 INSERTE 3 SUJETE 4 ENRUTE INSTALACIÓN DE LA TAPA 1 COLOQUE 4 ENRUTE NOTAS: 1. Al monitorear varios tanques conectados (2x420s, 3x420s etc.), es importante conectar el monitor al tanque que tenga menor nivel. Si son iguales, debe monitorear el tanque con el regulador. 2.
PAGE 7
INSTRUCCIONES DE INSTALACIÓN EXTRACCIÓN DEL MONITOR ESPECIFICACIONES DEL MONITOR 1 REMUEVA 2 PRESIONE ENTRADA 3 DESLICE 4 ESPECIFICACIONES RADIALES 4G, LTE CAT1, CATM, NB IOT, 3G SIM dual Bluetooth Módulo de efecto Hall para operación remota, I2C, 4-20mAdc, 0-5 VDC, Temperatura Tecnologías INFORMES Y SALIDAS Informes Interfaz de datos = Nivel del tanque (5 % de variación) Batería baja Salida alta/excesiva Detección de llenado Temperatura API Correo electrónico (al proveedor y/o consumidor) Da