Installation Instructions

ManualsBrandsOtodata Wireless Network ManualsElectronicsBLE Tracker

Do not

pressure wash

WARNING Changes or modiﬁcations to the unit must only be performed

by an authorized technician. For outdoor use only. Explosion Hazard

- Do not open when an explosive atmosphere is present. Potential

electrostatic charging hazard - wipe only with a damp cloth.

INSTALLATION Always follow your local regulations and standards.

If locally required, consult with certiﬁed personnel to ensure your

installation is compliant.

BATTERY REPLACEMENT Please contact Otodata Support or your

representative for battery replacement programs.

IMPORTANT It is critical in all

installations to ensure monitors’ antenna

is positioned vertically. This will achieve

optimal signal strength, ensuring that

you receive data in a timely manner and

prolong the battery life of the monitor.

PLEASE TAKE A MOMENT TO CAREFULLY READ

THE INSTALLATION INSTRUCTIONS INCLUDED

WITH YOUR MONITORS, AND ENSURE YOU

UNDERSTAND AND RESPECT LOCAL

REGULATIONS.

Installation Procedure

Bluetooth Elite

Scales for Industrial

Gas Tanks

GRA-0048 - EN - IM Rev: 002 ES3022 ES3026

Summary of content (8 pages)

PAGE 1
Installation Procedure GRA-0048 - EN - IM Rev: 002 ES3022 ES3026 Bluetooth Elite Scales for Industrial Gas Tanks IMPORTANT It is critical in all installations to ensure monitors’ antenna is positioned vertically. This will achieve optimal signal strength, ensuring that you receive data in a timely manner and prolong the battery life of the monitor.
PAGE 2
ST D A EA A N TH A O R C T ES TH M EX IC O IN TE R N W A TI O ES T N A L SO U PL A IN S & N W SUPPORT 1-514-673-0244 | 1-844-763-3344 (Toll-free) support@otodatatankmonitors.com EMERGENCY SUPPORT 1-833-529-9499 Available 24 hours, 7 days a week.
PAGE 3
L Specifications Bluetooth Elite scale to weigh small-size industrial tanks up to 300kg Input Features Auto-pairing to any Otodata ready sensor Android and IOS apps Ready to install Weight sensors data via Bluetooth Reporting & Outputs Reporting Data Interface Measured parameter (5% variation) Operating & storage temp.
PAGE 4
Specifications Bluetooth Elite scale to weigh industrial tanks up to 1,000kg Input Features Auto-pairing to any Otodata ready sensor Android and IOS apps Ready to install Weight sensors data via Bluetooth Reporting & Outputs Reporting Data Interface Measured parameter (5% variation) Operating & storage temp.
PAGE 5
Label on Device M/N: ES3026 F/W: 1.0 M/N: ES3022 F/W: 1.0 Barcode Barcode IC: 12649A-BEHT3AD FCC ID: 2ADQFBEHT3AD FAIT AU CANADA IC: 12649A-BEHT3AD FCC ID: 2ADQFBEHT3AD FAIT AU CANADA ISED Non-interference Disclaimer RF Exposure Statement for ISED This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
PAGE 6
Installation Instructions Instructions are applicable to models ES3022 and ES3026 a b Step 1 Verify All Parts are in Good Condition Before you begin, take a moment to verify if all parts are in good condition, and all 4 legs are in place. a. Model ES3022, Small Elite Scale 650lb (300kg) b.
PAGE 7
a b Step 3 Install Wireless Bluetooth Monitor Within 25ft of the Elite Scale Once your scale is leveled, it is time to install the Otodata Monitor. This monitor has a powerful antenna which will intercept the signal from the Scale and transmit the tank weight to the cloud. Step 4 Mount Tank onto Scale Exercising extreme caution, gently mount your tank onto the scale. Position as perfectly centered as possible. IMPORTANT DO NOT let the tank hit/fall onto the scale as it can cause irreparable damage. a.
PAGE 8
Members can watch step-by-step installation videos and shop online Sign up free today otodatatankmonitors.com/membership 8 Members can purchase monitors and accessories like gauges, leads, mounting equipment and more via our online store.