User's Manual

PEOPLE FIRST
 OticonA/S  Kongebakken9  DK‐2765Smørum  www.oticon.com
 Main+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219
1

Oticon Radio Model - Quick Installation Guide
Radio Model Name: mini RITE
The mini RITE radio model is a low power,
inductive radio transceiver working at 3.84 MHz
consisting of:
• a Digital-Signal-Processor (DSP)
• a radio Front-End (FE)
• memory
• antenna coil
• and smaller components
All components are mounted on a flexible Printed-
Circuit-Board (PCB), which is intended to be
installed as a module into Oticon wireless hearing
aid devices only.
The module also has all voltage regulators included
inside the DSP and FE and
buffered data
programming inputs on the board.
The module requires a battery, one or two
microphones and an audio receiver to be attached
and must be mounted in an external plastic shell.
The module is depicted to the right with its main
components and connections: