Installation Instructions

ManualsBrandsOticon ManualsElectronicshearing instrument with short range low power wireless radio

PEOPLE FIRST

Oticon Radio Model - Quick Installation Guide

Radio Model Name: Fusion 2 BTE13PP

The Fusion 2 BTE13PP radio model is a low power, short range, inductive radio transceiver working at 3.84 MHz. It can be seen below:

Fusion 2 BTE13PP Radio Model – Top Side

The most important parts of the radio module are a Digital-Signal-Processor (DSP), a radio Front-End (FE), an EEPROM memory, a telecoil and an antenna coil –

all mounted on the same main flex PCB. On the top side besides the radio Front-End, EEPROM and telecoil, also switches for user inter action (e.g. volume

control), two microphones, a programming plug and pads for connecting the battery can be seen. The radio model is intended to be installed in Oticon, Bernafon,

Sonic and affiliated wireless hearing aid devices of the BTE (Behind-The-Ear) PP (Power Plus) wearing styles.

Oticon A/S Kongebakken 9 DK-2765 Smørum www.oticon.com

Main +45 39 17 71 00 Fax +45 39 27 79 00 Denmark CVR-no. 42334219

Summary of content (3 pages)

PAGE 1
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: Fusion 2 BTE13PP The Fusion 2 BTE13PP radio model is a low power, short range, inductive radio transceiver working at 3.84 MHz. It can be seen below: Fusion 2 BTE13PP Radio Model – Top Side The most important parts of the radio module are a Digital-Signal-Processor (DSP), a radio Front-End (FE), an EEPROM memory, a telecoil and an antenna coil – all mounted on the same main flex PCB.
PAGE 2
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: Fusion 2 BTE13PP The DSP is the main processor controlling the functionality of the amplifier and the FE is a complete radio transceiver, including both transmitter, receiver and local oscillators. The Fusion 2 BTE13PP radio module also includes all voltage regulators inside the DSP and FE and buffered data programming inputs (PC_DATA and PC_CLOCK) on board.
PAGE 3
PEOPLE FIRST Oticon Radio Model - Regulatory Label Information Radio Model Name: Fusion 2 BTE13PP Contains: U28FU2BTEPP 1350B-FU2BTEPP FCC ID: IC: NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.