Installation Instructions

ManualsBrandsOticon ManualsElectronicsRadio model for hearing instruments

PEOPLE FIRST

Oticon Radio Model - Quick Installation Guide

Radio Model Name:

Aurora mini RITE-T

Oticon A/S

Main +45 39 17 71 00

Kongebakken 9

Fax +45 39 27 79 00

DK-2765 Smørum

Denmark

www.oticon.com

CVR-no. 42334219

The Aurora mini RITE-T radio model contains two radio transceivers running at 3.84 MHz and 2.4 GHz and both implemented on a single hardware platform.

The radio model is implemented on the main PCB is shown

to the left in 3D with connections to the antennas, the

microphones, the speaker and the battery terminals.

The 3.84 MHz radio is a low power, short range, inductive

radio transceiver working at a single channel at 3.84 MHz

using MSK modulation with 320 kbit/s data rate and

connected to a small coil antenna.

The 2.4 GHz radio is a Bluetooth

® Low Energy (BLE)

transceiver using GFSK modulation with 1 Mbit/s data rate

also capable of proprietary modes with higher data rates and

connected to a short wire antenna.

Aurora mini RITE-T Radio Model – 3D overview

Summary of content (4 pages)

PAGE 1
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: Aurora mini RITE-T The Aurora mini RITE-T radio model contains two radio transceivers running at 3.84 MHz and 2.4 GHz and both implemented on a single hardware platform. The radio model is implemented on the main PCB is shown to the left in 3D with connections to the antennas, the microphones, the speaker and the battery terminals. The 3.
PAGE 2
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: Aurora mini RITE-T This image shows, how the wire antenna is connected to the radio model inside the hearing aid plastic shells: Aurora mini RITE-T Radio Model – 3D overview part two. Oticon A/S Main +45 39 17 71 00 Kongebakken 9 Fax +45 39 27 79 00 DK-2765 Smørum Denmark www.oticon.com CVR-no.
PAGE 3
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: Aurora mini RITE-T Below the main flex PCB of the Aurora mini RITE-T radio model with the most important electrical and electro-mechanical components can be seen: Aurora mini RITE-T Radio Model – Main PCB – Top side The most important part of the radio model is the Engine Module mounted on the main flex PCB, which connects it to both the EEPROM memory and all external connections: On the top side these are the microphones, the
PAGE 4
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: Aurora mini RITE-T On the bottom side of the main PCB of the Aurora mini RITE-T radio model the connector for the speaker unit assembly (where the wire antenna for the Bluetooth radio is an integrated part), the programming connector, an other EEPROM memory and coil antenna for the 3.