User Manual

Sheet No. 1 of 1
Issue Date: 6-22-98
© SPX Corporation
Form No. 106192
Parts List &
Operating Instructions
for: 7996
SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Phone: [phone]
Tech. Serv.: [phone]
Fax: [phone]
Order Entry: [phone]
Fax: [phone]
International Sales: [phone]
Fax: [phone]
Honda
Lower Ball Joint Adapters
314425
Receiving Cup
314428
Installing Adapter
314426
Removing Adapter
314427
Receiving Cup
Safety Precautions
Caution: To prevent personal injury:
•
Wear protective eyewear that meets ANSI Z87.1 and OSHA standards.
•
Before performing any repairs on a vehicle, block all wheels to prevent movement.
•
Check the final alignment of tooling and components before applying pressure.
Ball Joint Removal and Installation
This tool set is designed for use on most cars and light trucks that have press-fit type ball joints. It will help the
user remove and install ball joints without the need to remove the control arm from the vehicle.
NOTE: Some cars and light trucks may have the upper ball joint spot-welded to the control arm. The weld
must be cut before attempting to remove the ball joint.
Refer to any operating instructions included with the product for detailed
information about operation, testing, disassembly, reassembly, and
preventive maintenance.
Items found in this parts list have been carefully tested and selected by
OTC. Therefore: Use only OTC replacement parts!
Additional questions can be directed to our Technical Services Dept. at
1-800-533-6127.