AirEZY2405-SWG TM Multi-Channel wireless Ethernet LAN by OTC Telecom, Inc.
© 1996 OTC Telecom Inc., San Jose, CA. All rights reserved. This manual is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the written permission of OTC Telecom, Incorporated. Trademarks AirEZY2405-SWG, the AirEZY logo, OTC Telecom Inc., and the OTC Telecom logo are trademarks of OTC Telecom, Inc.
• • • • • Customer account number Invoice number Date of Sale Model number of product Serial number of product FCC Identification MKZAZY2405SWG FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
DECLARATION OF CONFORMITY We OTC Telecom Inc., 602 Chartcot Ave. San Jose, CA, 95131 Telephone: (408)245-6888 Declare under our sole responsibility that the product AirEZY2405-SWG Complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CONTENTS 1.
1.1 SPECIFICATIONS 2.0 SYSTEM REQUIREMENTS 3.0 PRODUCT PACKAGE 4.0 AirEZY2405-SWG PLACEMENT 4.1 AirEZY2405-SWG INSTALLATION OVERVIEW 4.1.1 AirEZY2405-SWG: RJ-45 / 10 BASE T INSTALLATION AT THE FILE SERVER, HUB, OR ROUTER 4.1.2 AirEZY2405-SWG: RJ-45 / 10 BASE T INSTALLATION AT THE CLIENT 1.0 Introduction Congratulations on your purchase of OTC Telecom’s AirEZY2405-SWG.
AirEZY2405-SWG offers the user easy installation and use. Simply connect AirEZY2405-SWG directly to the Ethernet bus or network interface card (NIC) through the RJ-45 connectors. Your AirEZY2405-SWG wireless LAN device will appear as a standard “wired” node to the network operating system. Another built in feature with your AirEZY2405-SWG is platform independence. AirEZY supports all major network operating systems without the need of installing complex and time consuming software drivers. 1.
1 cable 1 each 1 each 1 each 7 ft Dark Blue Cross over cable for Hub connection Plastic Retaining Plate Adhesive Pad Software Diagnostic Disk 4.0 AirEZY2405-SWG Placement After removing AirEZY2405-SWG from the shipping box, be sure to lay out all the contents to ensure that all necessary components are accounted for before you begin the installation process. Refer to Section 3.0 of this manual for a complete list of provided components. AirEZY2405-SWG is a spread spectrum direct sequence transceiver unit.
AirEZY2460SWG Server Hub /Switch /Router AirEZY2460 -SWG AirEZY2460 -SWG CASE 2: Client / Server Installation using AirEZY2405-SWG-AP(Access Point) For additional information refer to AirEZY2405-SWG-AP installation manual (included with AirEZY2405-SWG AP) • When using AirEZY2405-SWG with more than six(6) wireless nodes, the AirEZY2405-SWGAccess Point unit is highly recommended. Install the AirEZY2405-SWG-AP unit adjacent to your file server or directly onto your hub.
Diagram 3 Using AirEZY2405-SWG-SWG in conjunction with AirEZY2405-SWG-AP (Access Point) in Client/Server Configuration in a stand-alone network Server AirEZY2460AP Access Point AirEZY2460-SWG AirEZY2460-SWG CASE 3: Peer to Peer Installation If you are planning to set up a peer to peer work group, instead of placing one AirEZY2405-SWG unit at the file server, you will need to set it up at your lap top / note book PC, workstation or desktop PC.
5) At this point, insert the power adapter plug into the AirEZY2405-SWG unit. Find a convenient plug location adjacent to your file server and plug in the power adapter. 6) After being plugged in, the AirEZY2405-SWG unit will begin a series of self diagnostic tests. This series of tests will last for approximately a few brief seconds as it begins the Auto Detection Mode.
4.1.2 AirEZY2405-SWG: RJ-45 / 10Base T Installation instructions for your client sites: This section of the manual will provide you with the instructions for installing the AirEZY2405-SWG client portion of your wireless LAN. 1) Attach the AirEZY2405-SWG to one RJ-45 cable just as you would install a standard Ethernet station node when using a standard twisted pair cable. NOTE: This connection port is similar to a standard telephone jack connection.
Step1 Yellow (Link) series of short flashes 1 sec Power on diagnostic / 10BaseT Detection Step 2 yellow (Link) series of 1 long and 2 short flash continuous Poor UTP cable connection -or-No UTP cable detected Step 3 yellow (Link) constant slow continuous until other unit is linked Security function invoked UTP cable connection detected and condition “OK” on and off short constant rapid flash continuous when remote unit is “ON” Red (TX) Step 4 yellow (link) LED Display when network is prop
Appendix A
Orientation of AirEZY2405-SWG