User's Manual

ManualsBrandsOsterhout Design Group ManualsComputers & AccessoriesWireless Keyboard and 3D Controller

The features of wireless keyboard and 3D controller



FCC ID: 2ADCM-3DKBC

Modelnumber:220‐00069

Product Image

Package contents

Wireless Keyboard and 3D controller device

USB charging cable

COMPATIBILITY

Android 4.4.2 above.

Power on

Press the power button for 1 sec. A short haptic vibration occurs and all keyboard

backlight, indicators flash once and then only the model indicator (white) and BT (blue)

remaining on.

Power off

Press the power button for 3 sec, the power indicator (green) will on. It will be shut down

when you release the power button.

Bluetooth pairing

1. Press the BT button, the BT indictor starts blinking. Turn on the BT from host and

search the Bluetooth device.

Summary of content (4 pages)

PAGE 1
The features of wireless keyboard and 3D controller FCC ID: 2ADCM-3DKBC Model number:220‐00069 Product Image Package contents Wireless Keyboard and 3D controller device USB charging cable COMPATIBILITY Android 4.4.2 above. Power on Press the power button for 1 sec. A short haptic vibration occurs and all keyboard backlight, indicators flash once and then only the model indicator (white) and BT (blue) remaining on. Power off Press the power button for 3 sec, the power indicator (green) will on.
PAGE 2
. The ID of the keyboard and joystick is KBjoystick12345678. Click it and pair it. Once it is connected, the Bluetooth indicator on the keyboard will off. Battery level Press the battery button when it is off or no, the battery indicator will show the battery capacity level. (0-25% Red, 26-50% Yellow, 51-100% Green). Mode change Press the mode button for 1 sec to change the keyboard or joystick mode. 3D mode Press the 3D button for 1sec to enable the 3D mode.
PAGE 3
DESIGN Connector Type: Bluetooth 4.0 Battery Type: lithium-ion battery Wireless Range: m, ft Weight: xxx g, xx lbs Height: mm, in Width: mm, in COMPATIBILITY Android 4.4.2 above. Dustproof Ingress of dust is not entirely prevented, but it will not enter in sufficient quantity to interfere with the satisfactory operation of the equipment. Waterproof Water projected by a nozzle (6.3 mm) against enclosure from any direction have no harmful effects.
PAGE 4
FCC warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.