USER MANUAL K-WLM-01 V1.
FCC information FCC notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co‐ location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product.
IC Statement This ZIGBEE RF apparatus complies with Canadian RSS-GEN. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
EU Limitations This device may not be installed into road or rail vehicles. This product is sold to all CE countries. BE GE CZ DK DE EE IE EL ES FR HR IT CY LV LT LU HU MT NL AT PL PT RO SI SK FI SE UK Declaration of Conformity We, OSSTEM IMPLANT Co., Ltd. 1st floor, B-dong, 135, Gasan digital 2-ro, Geumcheon-gu, Seoul, Korea declare under our sole responsibility that our product meets the essential requirements to be applied.
CONTENT 1. Package Components…………………………………………………………………………………………………………..……………….8 2. Summaries…………………………………………………………………………………………………………………………………………...8 3. 2.1 ZIGBEE RF Module Applications…………………………………………………………………………………………………8 2.2 InterfaceSignals………………………………………………………………………………………………………………………….8 2.3 Module Installation .........................................................................................................................8 Hardware Specifications ........................................
1. Package Components RF module 2. Summaries 2.1 ZIGBEE RF Module Applications This is the ZIGBEE module for OEM usage in the application of wireless data transmission. This module is compact module which can be put on the any PCB board. This module is used primarily inside devices as like ZIGBEE System, Health Care, Industrial Control and Monitoring for wireless connection of digital signal and data line as USART signal. 2.2 Interface Signals This module is based on USART interface.
The installation procedure is as follows. Connect the motherboard and ZIGBEE Module using 1.25mm pitch (2x10 pins) Connectors and fix it to the case. 3. Hardware Specifications 3.1 General Wireless circuit compatible with 2.4GHz-IEEE 802.15.4 standard and provide maximum speeds up to 250 Kbps. 3.2 Product Characteristics K-WLM-01 is designed for ZIGBEE module product as device side. It provides the reliable data transmission between user and ZIGBEE module device via wireless network.
3.3 ENVIRONMENT 3.3.1 Temperature Operating Temperature Conditions The product shall be capable of continuous reliable operation when operating in ambient temperature of -20℃ to +50℃. Non-Operating Temperature Conditions Neither subassemblies shall be damaged nor shall the operational performance be degraded when restored to the operating temperature when exposed to storage temperature in the range of -20℃ to +60℃. 3.3.
4. Hardware Requirements 4.
4.
4.
P2 4 NC No Connection P2 5 NC No Connection P2 6 NC No Connection P2 7 3.3V Power VDD P2 8 NC No Connection P2 9 3.
5. DIMENSION INFORMATION 5.1 PCB DIMENSION PCB Dimension (W x L): 39.3 x 39.3mm, Thickness 0.8mm ±0.