COTA® WPT CLIENT INSTALLATION GUIDELINES VERSION 1.
Cota WPT Client Installation Guidelines COTA WIRELESS POWER TRANSFER CLIENT INSTALLATION GUIDELINES The Cota® Wireless Power Transfer Client (Cota WPT client) must be professionally installed by an Ossia®-authorized technician according to the following conditions: The Cota WPT client should be installed in: • Indoor locations only. • Commercial, industrial or other non-residential locations only. • In a fixed location only.
Cota WPT Client Installation Guidelines SYSTEM CONFIGURATION AND CALIBRATION The following steps should be completed each time a system is installed: After the Cota WPT source and Cota WPT client are securely installed, perform these steps: 1. Insert a small screwdriver to depress the Reset button on the Cota WPT client as shown in Figure 3. 2. Log in to the Cota Web Admin as described in the DC-1145_Ossia_Cota_Wireless_Power_Transfer_System_UserManual. 3.
