Owner's Manual

~UDIO
SS2V70-200W
The SS2V70-200W is a unique 70V Speaker Selector featuring ...
2
ZONE
70 VOLT
SPEAKER
SELECTOR
2 independent Zones each controlled by a 200 Watt 70V Mono Volume Control featuring a Rotary Style Knob. Each zone
has On/Off switch as well. The unit has a single 2 conductor input and direct pass through allowing to stack additional
SS2V70 Speaker selectors only limited by your application. Standard 70V rules apply to the number of speakers used per
zone, matching the available power from the 70V amplifier.
Front
Panel
1.
Zone 1 On/Off Switch
2. Zone 1 Volume Knob
3.
Zone 2 On/Off Switch
4. Zone 2 Volume Knob
Note #1: The Zone 1 & 2 On/Off button allows you to turn each zone off
independently of the volume knob
Rear Panel
1.
Zone 2 Speaker Output
2. Zone 1 Speaker Output
3.
-lnput From Amplifier
4. Straight Thru Output
0
-·-
. .
--'""!'-
-
..
-~
.,.,,
0
Note #2: The Thru output comes directly from the Input, it does not go
through the transformer allowing you to stack multiple SS2V70.
Specifications
Power Handling:
Frequency Response:
Selector Type:
Steps:
Connection Type:
Wire Size Acceptance:
Amplifier Protection:
Weight:
Dimensions:
200 Watts Per Channel/Zone Mono Single Channel
20Hz-22KHz
(+O
dB, -0 dB)
Noise-Free, front access On/Off Pushbutton and Rotary Knob
33 dB, 1 O steps plus full off (step
11)
Removable Input/output Connectors
16 Gauge 2 Conductor
70V Mono only No Impedance Protection Needed
3.6 lbs
(WxHxD) 5.5 x 2.25 x 6.25"
0
//////

Summary of content (4 pages)