accuracy in sound
2M 78 2M 78 Verso 2M 78 PnP MkII 2M Mono 2M Mono Verso 2M Mono PnP MkII 2M Red 2M Red Verso 2M Red PnP MkII Output voltage at 1 kHz, 5 cm/sec. 4 mV 4 mV 5.5 mV 5.
About the Ortofon 2M Series cartridges Thank you for choosing the Ortofon 2M magnetic cartridge system for high performance sound reproduction of your favourite analogue records. Our company has been working with sound reproduction since 1918. Ortofon developed its first phono cartridge in 1948, since then more than 300 different phono cartridges have been developed and manufactured.
Mounting the 2M cartridge 1. Remove stylus unit with stylus guard before working with leads and screws. Handle all parts carefully. (fig. 1-2) 2. Note colours and channel indications on rear side of the body for correct connection of the tone arm leads. (fig. 3) White L+ Red R+ Fig. 2 Fig. 1 6 Green RG Blue LG Fig. 3 3. The Ortofon packing contains a pair of screws with a thread length of 5 mm. The screws are to be used with headshell thicknesses of max. 3.5 mm.
2M top mount 2M Verso bottom mount Do not tighten screws completely before the stylus unit has been remounted (fig. 1) – to adjust stylus overhang refer to the record player or tone arm manual and cartridge dimensions. (fig. 5) Never overtighten screws and never use aluminium screws, as they can get stuck in the threaded holes of the mounting plate.
3.5 mm 18.0 mm 20˚ 18.5 mm 6.0 mm 24.0 mm Stylus care and maintenance To obtain optimal sound reproduction, remove dust from stylus regularly by using the enclosed small brush. If the headshell can be easily removed from the tone arm, we recommend that you turn the diamond upwards and brush gently forward in the direction of the diamond tip along the cantilever. Fig. 5 10 18.5 mm 12.7 mm M2.
Stylus guard How to replace M2.0 mm screws on 2M Verso Remove the stylus guard before use by holding at the front and rear of the guard and gently pressing the rear while tilting it downwards. (fig.
2M Headshell features • Universal mount fitting a wide range of tonearms. • The headshell body is manufactured from a special compound used for Medical industry, ensures high rigidity while reducing unwanted vibration • Distance to connector 52 mm. Headshell with a 2M cartridge pre-mounted provides correct Baerwald alignment with the major part of tonearms with universal mount. • Headshell weight 12.
Ortofon A/S | Stavangervej 9 | DK-4900 Nakskov Tel. +45 54 91 19 15 | www.ortofon.com 08-2017/5-800152-12 Get more information about 2M cartridges.