ORPAK Tag Reader (OrTR) QUICK REFERENCE MANUAL
ORPAK Tag Reader (OrTR) Cat No. 817410910 1.1. OrTR Available Configurations Available configurations MiFare KB Magnetic Reader (language) card reader RS485 OrTR KB(xx, xx, xxx) √ OrTR(xx, xx, xxx) √ FHO MIFARE POD UNIT √ √ LAN RS232 √ √ √ √ √ √ √ √ √ 1.2. OrTR (no keyboard) Description The Orpak Tag Reader (OrTR) is a standalone unit for contactless cards and tags intended for vehicle or driver tag identification in gas stations (see Figure 1).
ORPAK Tag Reader (OrTR) Cat No. 817410910 The OrTR has a stylish-look, with a clean panel, which includes two indicators (green and red) and a large LCD. Its operation is very simple: to start a fuel purchase, all the customer has to do is to wave the tag or card in front of the unit. After the tag is recognized and validated, clear messages shown on the display guide the customer and help him to complete the transaction.
ORPAK Tag Reader (OrTR) Cat No. 817410910 1.3. OrTR (with Keyboard) Description The OrTRs with keyboard (see Figure 3) is similar to the one with no keyboard except for its dedicated keyboard; The full keyboard enables the user to operate the unit and insert the vehicle required data to be sent to the Station Controller. Figure 3. OrTR KB, General view 1.4.
ORPAK Tag Reader (OrTR) Cat No. 817410910 1.5. Supported Cards/Tags Options This is a contactless card (see Figure 4) used as a fueling card by the driver at the gas station. When the card is presented next to the OrTR, it reads the card / tag data and transmits it to the station controller in the gas station. Upon verification and approval, the Station Controller activates and releases the pump valve, so fuel can be dispensed to the vehicle.
ORPAK Tag Reader (OrTR) Cat No. 817410910 1.6. SPECIFICATIONS User Interface • • • • LCD- Alphanumeric Dual-LED green and red indicators Buzzer Optional reader for FuelOpass tags Display Type Communication Interface • • • • LCD-16 Characters * 2 lines RS232 (optional) RS- 485 LAN (optional) Card Reader • Magnetic card ISO 7811 Contactless MiFare reader • Contactless MiFare reader 13.56MHz Physical No keyboard model: • Height – 110 mm (5.1 in.) • Width – 184 mm (8.3 in.) • Depth – 35.5 mm (1.
ORPAK Tag Reader (OrTR) Cat No. 817410910 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and: (2) This device must accept any interference received, including interference that may cause undesired operation THE FCC WANTS YOU TO KNOW: This equipment has been tested and found to comply with the limits or a Class A digital device, pursuant to part 15 of the FCC Rules.