User Manual

ManualsBrandsOrion ManualsAccessoriesLCD Ceiling Mount (15 to 37-inch)

Installation and User’s Guide

FLAT LCD DISPLAY MOUNT MODEL

-01

CEILING

MOUNT

http://www.orionimages.com

All contents of this document may change without prior notice, and actual product appearance may differ

from that depicted herein

Summary of content (7 pages)

PAGE 1
Installation and User’s Guide Installation and User’s Guide FLAT LCD DISPLAY MOUNT MODEL CMK-01 CEILING MOUNT http://www.orionimages.
PAGE 2
Installation and User’s Guide http://www.orionimages.com Warning Statements The wall, floor or ceiling should be capable of supporting a weight of at least five (5) times the monitor’s weight. If it cannot, the wall, floor or ceiling must be reinforced. Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to Failure to do so could result in serious personal injury.
PAGE 3
Installation and User’s Guide http://www.orionimages.com CMK-01 Installation STEP1 Screw the CMK-01 coupling adapter to the adjustable suspension adapters or 1½" (NTP) Pipe. Secure the coupling with the M6 security screw (supplied). Figure 1. Coupler Coupler Swivel lock (Located inside Coupler) Keyhole mounting opening VESA 75 / 100 Mounting points Adjustable Ceiling Adapter Single Stud Installation STEP2 Secure the ceiling plate to the ceiling structure (see WARNING).
PAGE 4
Installation and User’s Guide http://www.orionimages.com Solid Structure Installation 1. 2. 3. Secure the ceiling plate to the ceiling structure (see WARNING). Use suitable hardware (commercially available) depending on your installation environment to secure the four (4) mounting points found on the ceiling plate to the ceiling structure (Figure 3).
PAGE 5
Installation and User’s Guide http://www.orionimages.com VESA 100: Secure the VESA 75/100 mounting bracket to the VESA 75 Using the four M4 x 10 Phillip screws. Raise and secure your monitor to the plate that has the VESA 100 now on you CMK01 adapter and use the four (4) M4 x 10 (mm) Phillips screws (supplied) and a Phillips screwdriver. (Do not use other tools other than a Phillips screwdriver to prevent damage to the monitor or mounting points).
PAGE 6
http://www.orionimages.com Installation and User’s Guide Technical Specifications Features: Tilt mount allows of adjustments up and down of ±90° from center and 360° swivel and cable access. Comes with a combination plate of VESA 75 and VESA 100 for optional mounting depending on monitor.
PAGE 7
http://www.orionimages.com Installation and User’s Guide Limited Lifetime Warranty All Orion Images products carry a limited lifetime warranty from ship date against defects in materials and workmanship. Orion Images is not liable for improper installation that results in damage to mounts, adapters, display equipment or personal injury. Contact Orion Images In the event of missing and/or damage equipment, or technical questions, the following information can help in the completion of the installation.