Introduction Connections DIGITAL VIDEO DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER SD-V392SU2 OWNER’S MANUAL Basic setup This device does not tape-record copy protected DVD Video Discs. J2D81001A (E)COV.
Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFEGUARDS Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14.
IMPORTANT SAFEGUARDS / Power source Introduction 24. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 25. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 26.
Introduction Precautions Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD/VCR. Do not leave rubber or plastic products to contact the DVD/VCR for a prolonged period. They will leave marks on the finish. The top and rear panels of the DVD/VCR may become warm after a long period of use.
Notes on discs Structure of disc contents Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. Introduction On handling discs DVD video disc DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on discs (continued) About this owner’s manual This owner’s manual explains the basic instructions of this DVD/VCR. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD/VCR may not respond to all operating commands. This is not a defect in the DVD/ VCR. Refer to instruction notes of discs. Playable discs This DVD/VCR can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx.
Contents Basic playback (DVD) IMPORTANT SAFEGUARDS .......................... 2 Power source ................................................... 5 Precautions ...................................................... 6 Notes on discs .................................................. 7 Contents. .......................................................... 9 Identification of controls ................................. 10 Playing a disc .................................................
Introduction Identification of controls See the page in for details.
Display window VCR indicator (VCR) Still indicator Introduction Play indicator Disc inserted indicator (DVD) Recording indicator (VCR) Disc inserted indicator (CD) AM/PM indicator (AM is not displayed) Multifunctional indicator Track indicator (CD) Progressive indicator Tape loaded indicator (VCR) Timer Recording indicator (VCR) VCR operation status Press CALL to display information on screen. To cancel the display, press CALL again.
Introduction Identification of Controls (continued) The instructions in this manual describe the functions on the remote control. See the page in for details.
Introduction Inserting batteries 1 Slide the battery compartment cover in the direction of the arrow. 2 Install two “R03/AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cover. Battery precautions The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
Connections Antenna connections If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 16 for the proper connections. Antenna to DVD/VCR connection The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
DVD/VCR to TV connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Connections Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a premium channel which is scrambled, you must have a descrambler box for proper reception.
IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
Connections Connecting to a TV Connect the DVD/VCR to your TV. Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you also connect the S-video or ColorStream® component video outputs to your TV/monitor. (See page 19.
S-video output An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has SVideo input, and does not have component video inputs. Component video outputs PROGRESSIVE outputs Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
Connections Connecting to optional equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. For connection to your TV, see “Connecting to a TV” 18 19 . • This selection uses the following reference mark.
Warning When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the DVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires dangling.) To enjoy DTS Digital Surround™ playback, an external 5.
Basic setup POWER 3 4 Setting the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). TV/VCR VCR DVD Setting the video channel 1 Press and hold 3 or 4 on the remote for 3 seconds in standby mode. 3 OR The video channel will start to flash for 3 seconds in the display window.
Setting the language VCR DVD You can choose from three different languages (English, French and Spanish) for the on-screen displays. 1,4 1–3 1–3 Setting the language • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.) 1 4 Press VCR MENU until the MENU screen is cleared. Basic setup Preparation: VCR MENU SETUP Press VCR MENU. The VCR menu screen will appear.
Basic setup CALL POWER VCR DVD Clock setting The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically.
To set STANDARD TIME To set DAYLIGHT SAVING TIME In the rare event that you live within broadcast range of two stations in two different time zones, the DVD/VCR may recognize the wrong station for the AUTO CLOCK setting. To correct the situation: You can set the DAYLIGHT SAVING TIME automatically or manually. 1 Press VCR MENU. VCR MENU SETUP OFF OFF Press VCR MENU. Press SET + or – to select “SYSTEM SETUP”, then press ENTER.
Basic setup Clock setting (continued) If the AUTO CLOCK process did not set the date and time correctly, you must set them manually for timer recording and DAYLIGHT SAVING TIME. 1 2–4 CANCEL 2–4 Manual clock setting EXAMPLE: Setting the clock to “8:30 AM” September, 24 (FRI), 2004. 1 Press VCR MENU. 2 Press SET + or – to select “SYSTEM SETUP”, then press ENTER.
Tuner setting VCR DVD This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode.
Basic setup Tuner setting (continued) NUMBER BUTTONS 3 1,2 1,2 To ADD/DELETE channels Noise elimination 1 When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACKGROUND “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”. Repeat the step 1 on page 27. Then press SET + or – to select the “ADD/DELETE” and press ENTER.
Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked and EJECT . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Basic setupPlayback (VCR) Erase prevention tab Automatic power ON When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Playback (VCR) Cassette tape playback VCR DVD To play a prerecorded tape. REW PLAY FWD STOP Playback Rewind or forward the tape Preparation: Stop the playback or recording via STOP on remote. • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR indicator will light). To rewind the tape: 1 Press REW. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically).
Special playback SLOW ATR REW PLAY FWD PAUSE/STILL CM SKIP SET +/– Adjusting tracking condition Reverse picture search function Press REW once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY. Automatic tracking adjustment Whenever you insert a tape and start playback, the automatic tracking feature continuously analyzes the signal to enable optimum picture quality during playback.
Playback (VCR) Convenience function CALL COUNTER RESET CLOCK/COUNTER VCR MENU PLAY STOP ZERO RETURN ENTER SET +/– Repeat playback Zero return function The entire video tape will play until its end. The tape will automatically rewind to the beginning and the playback will be repeated. This function rewinds the tape to the “00:00:00” counter position automatically. 1 Press VCR MENU. Press SET + or – to select “AUTO REPEAT”.
VCR DVD CLOCK/COUNTER INDEX +/– STOP Clock/counter display Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window. COUNTER CLOCK Press VCR DVD selector. The DVD mode and the VCR mode alternate with each other in the display. DVD mode VCR DVD This function enables you to locate the beginning of any recording made on the VCR. Recording an INDEX mark The Index Search function automatically records an INDEX mark on the tape whenever a recording is initiated.
Recording (VCR) VCR DVD Recording a TV program 4 2 5 Recording and viewing the same TV program. 4 Recording a TV program Preparation: • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.) 4 1 Press Number buttons or CH +/– to select the channel to be recorded. 2 SET + 3 CH – 4 5 6 7 8 9 CH 110 CH + ENTER SET – 1 Load a cassette tape with the erase prevention tab intact.
TV/VCR PAUSE/STILL STOP To stop recording Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Auto Rewind feature This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape. STOP Recording (VCR) To stop recording temporarily Press PAUSE/STILL to avoid recording unwanted material. Press again to continue the recording. “ ” will appear on screen for about 4 seconds.
Recording (VCR) VCR DVD One-touch Timer Recording (OTR) 4 2 5 The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. STOP 4 One-touch Timer Recording (OTR) Preparation: • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.) Example: One-touch Timer Recording for 30 minutes. 4 Press Number button or CH +/– to select the channel to be recorded.
VCR DVD EJECT Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. 2,3 TIMER REC 1,5 1–3 CANCEL Timer recording Preparation: • Press VCR DVD selector to select the VCR mode. • Load a cassette tape with the erase prevention tab intact. • Check the time and date are correct 24 .
Recording (VCR) VCR DVD Timer recording (continued) SET +/– TIMER REC VCR MENU ENTER CANCEL Setting procedure To set daily/weekly timer To confirm or cancel a program Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MOSA: Monday to Saturday) Timer recording Follow the procedure of timer recording on the previous page. At step 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER.
Other functions (VCR) Stereo recording and playback / Second Audio Program (SAP) AUDIO SELECT SET +/– VCR MENU ENTER Stereo recording and playback Second Audio Program (SAP) The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.
Other functions (VCR) Duplicating a video tape VCR DVD If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. 2 1 4 5 Duplicating a video tape Preparation: • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.) • Load a cassette tape with the erase prevention tab intact.