DVD/VCR DECK Operating Instructions Model No. PV-D744S-A *Ability to play back may depend on recording conditions. As an ENERGY STAR ® Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the ENERGY STAR ® guidelines for energy efficiency. Please read these instructions carefully before attempting to connect, operate, or adjust this product. Please save this manual. Spanish Quick Use Guide is included.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
IMPORTANT SAFEGUARDS 25. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 26. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 27.
Disc information Discs that can be played Disc type Disc Logo Disc formats supported by this unit DVD-Video • DVD-Video format CD-DA • CD-DA format CD-R CD-RW • CD-DA format • MP3 and JPEG file (finalized*) • Discs played 8 cm (3") or 12 cm (5"). • * A process that allows play on compatible equipment. • This unit can play back FUJICOLOR and Kodak Picture CD formats. Discs which cannot be played with this unit • DVD with Region No.
Contents Before using your unit Disc playback operation IMPORTANT SAFEGUARDS .......................... 3 Disc information ............................................... 6 Contents ........................................................... 7 Parts and functions .......................................... 8 Display ............................................................. 9 Remote control ............................................... 10 Power source .................................................
Parts and functions Front Discs that can be played VCR/DVD mode selector button STOP button Cassette Loading Slot OPEN/CLOSE button PLAY button Disc tray EJECT button POWER CHANNEL VCR/DVD EJECT OPEN/CLOSE STOP PLAY STOP PLAY SKIP VCR VIDEO IN 2 DVD REW FF REC L– AUDIO IN 2 – R Display window POWER button AUDIO (L/R)/ VIDEO IN jacks (LINE 2) CHANNEL buttons / DVD indicator REW (Rewind) button SKIP 6 button (DVD mode) VCR indicator Remote sensor REC/OTR button FF (Fast Forward) b
Display Display window 1 2 3 4 12 5 6 11 No. 1 10 9 8 Display VCR 7 Description When this unit and the TV are only connected by a coaxial cable, pressing the TV/VCR button on the remote control makes this display appear. 2 Playback (lights) / Auto resume (flashes) 3 Still picture 4 DVD DVD disc is inserted. 5 CD CD is inserted.
Remote control Discs that can be played EJECT See page 24 OPEN/CLOSE See pages 36, 44, 45, 48 INPUT See page 34 PROGRESSIVE See page 35 TV/VCR See pages 21, 29 CLOCK/COUNTER See page 27 DISPLAY See pages 26, 27, 29, 31, 38, 53 SETUP VCR MENU See pages 18~23, 26, 31~33, 35, 46, 47, 49~54 VCR/DVD See pages 18~23, 25, 27, 28, 30~32, 35~54 POWER See pages 18, 21, 36 0-9 See pages 23, 28, 30, 38, 41, 45, 47, 48 ENTER See pages 18~23, 26, 31~33, 35, 36, 38~41, 43~54 DVD MENU See pages 43, 45 CH / See pages 28, 3
Inserting Batteries 1 Open the battery compartment cover. two “AAA” batteries paying 2 Install 3 attention to the polarity diagram in Replace the compartment cover. the battery compartment. Battery precautions The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
Basic connections If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 14 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
DVD/VCR TO TV CONNECTION After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception.
IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
Playback connections The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Connect to a TV with Audio/Video Output You can enjoy playback by connecting the unit to a TV. Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the audio/video cable (not supplied).
Connect to a Stereo Amplifier with Audio Output You can enjoy high quality audio by connecting the audio output to your amplifier. Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
Auto clock setting The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel signal. Preparation: You must set the antenna connection before the AC cord plug is inserted into the AC outlet. Auto clock setting WAIT 30 MINUTES! when the power switch is off, after the connections of the antenna and the power plug. Because the Auto Clock setting feature is activate.
Daylight Saving Time setting You can set the Daylight Saving Time “ON” or “OFF”. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) the step 1 on page 18 and 1 Repeat press SET + or – to select “DAYLIGHT SAVING TIME” option, then press ENTER.
Manual clock setting You must set the date and time for timer recordings and Daylight Saving Time if the Auto Clock process did not set them correctly. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) EXAMPLE: Setting the clock to “8:30 AM” October, 30 (SAT), 2004. 1 Press VCR MENU. The VCR menu screen will appear.
Setting the video channel / Setting the language Setting the video channel To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). When a TV is connected with the 75 ohm coaxial cable only. Press and hold 3 or 4 on the remote control for 3 seconds in the standby mode to select CH 3 or 4. The selected channel number will flash on the display for about 4 seconds.
Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
To ADD/DELETE channels / Weak signal display Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) To ADD/DELETE channels You can add the channels you want or delete the channels you do not want manually. the step 1 on page 22. 1 Repeat Then press SET + or – to select the “ADD/DELETE” option and press ENTER.
Loading and Unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. VCR Erase prevention tab Automatic power ON When you insert a cassette tape the VCR power will turn ON automatically.
Cassette tape playback Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) • Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). To start playback Press PLAY. Playback will start. “ ” will appear on the screen for about 4 seconds. To stop playback Press STOP once. The tape will stop but remain fully loaded and ready to play.
Special playback Picture Search Repeat playback Reverse picture search function REW x 1 or x 2 during the playback. Press Forward picture search function x 1 or x 2 during the playback. Press FF To return to playback: Press PLAY. The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated. Press VCR MENU. Press SET + or – to select 1 “AUTO REPEAT” option.
ZERO SEARCH function / Video index search system Preparation: • Turn ON the TV and set it to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) ZERO SEARCH function This function makes tape-rewinding stop at the counter 00:00:00 position automatically. DISPLAY. 1 Press The counter display shows the tape 8 : 47AM MON HI-FI running time during playback or recording. 00 : 04 : 38 SP VCR COUNTER RESET at the desired 2 Press tape position.
Recording a TV program Recording and viewing the same TV program. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) a cassette tape with the erase 1 Load prevention tab intact. The VCR will automatically turn on. SPEED to select the desired tape 2 Press speed SP or SLP. The tape counter and SP or SLP will appear on the screen for about 4 seconds.
To stop recording Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. To stop recording temporarily Press PAUSE/STILL to avoid recording unwanted material. ” will appear on screen for about 4 “ seconds. Press again to continue the recording. NOTES: • The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode. • You can select a recording channel in the recording pause mode.
One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) Example: One-touch Timer Recording for 30 minutes. a cassette tape with the erase 1 Load prevention tab intact. The VCR will automatically turn on. SPEED to select the desired tape 2 Press speed SP or SLP.
Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Preparation: • Press VCR/DVD to select the VCR mode. Load a cassette tape with the erase prevention tab intact. • Press the DISPLAY button to verify that the time and date are correct (see page 29).
Timer recording (continued) Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA: Monday to Saturday) Timer recording Follow the procedure of timer recording on the previous page. At picture 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER. When you press SET – repeatedly, the indicator at DATE will change as follows, in this case the day is Friday.
Stereo recording and playback / Second Audio Program (SAP) Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When a MTS STEREO broadcast is received, the word STEREO will appear on the screen and the program can be viewed or recorded in stereo. The Hi-Fi STEREO recording procedure is the same as for normal recordings. STEREO NOTE: When using a Cable TV system, stereo TV programs may be transmitted over a mono cable channel.
Duplicating a video tape If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. a blank cassette tape with the erase prevenPress REC/OTR on the recording VCR, then press 1 Load 4 PAUSE/STILL. tion tab intact into the recording VCR. Load a previously recorded tape into the playback VCR or CAMCORDER.
Setting setup language/Progressive scan mode Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) “No Disc” will appear on the screen. (If a DVD disc has already loaded, the playback will start automatically.) No Disc Setting setup language The setup language can be selected. Press SETUP in the stop mode. 1 The SETUP MENU of DVD will Language Picture Sound Parental Other appear on the screen. Then press to select Other.
Playback procedure Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) OPEN/CLOSE. 1 Press The disc tray will open. a disc onto the tray. 2 Place Hold the disc, position it with the printed label side up, align it with the guides, and place it in its proper position. PLAY or OPEN/CLOSE. 3 Press The disc tray closes automatically. On the screen, changes to “Reading” and then playback will commence.
Special playback Note: There may be a slight delay between pressing the button and the function activation. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Fast Forward Playback Press FF during normal playback. Each press of FF will increase the speed of the search (x4), (x8), (x20). (x2), • To resume normal playback, press PLAY. Review Playback Press REW during normal playback.
Zooming/Locating desired scene Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during playback. 1 Press The center part of the image will 1 be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). / or / to view a different part of the frame.
Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Marking the scenes MARKER during 1 Press playback. Marker 1 Marker 2 Marker 3 /Enter/Cancel/Marker the blank Marker using 2 Select / . Then press ENTER at the desired scene.
Repeat playback Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Title, Chapter, Track Playback 1 Press PLAY MODE during playback or stop mode. DVD CD Repeat : Off /Enter/Play Mode Play Mode : Off Repeat : Off /Enter/Play Mode ENTER once or twice to select “Chapter” or “Title”. 2 InPress to select “Repeat” and then press case of CD, at first press ENTER once or twice to select “Track” or “All”.
Program playback/Random playback (CD) Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Program playback You can arrange the order of tracks on the disc. PLAY MODE in the stop 1 Press mode. ENTER repeatedly until 2 Press the program table shown at right Play Mode : Off Repeat : Off /Enter/Play Mode Play Mode Repeat 1 2 3 appears. Clear Example: In case you wish to 3 program in order of 7, 3, 11: Enter as 7 ,3 , 11.
Changing soundtrack language / Subtitles / Karaoke playback Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Changing soundtrack language You can select the language when you play a multilingual disc. AUDIO during playback. 1 Press The current soundtrack language 1/8 Eng DolbyDigital will appear. AUDIO repeatedly until 2 Press the desired language is selected.
Changing angles / Title selection / DVD menu Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Changing Angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. ANGLE during playback. 1 Press The current angle will appear. 1/9 2 Press ANGLE repeatedly until the desired angle is selected. Title Selection Two or more titles are recorded on some discs.
MP3/JPEG playback This unit can play back MP3/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play back due to the condition of the recording. MP3/JPEG CD information Limitations on MP3/JPEG CD playback • MP3/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3” or “jpg”. • This unit can read 600 files per disc.
Preparation: • Turn ON the TV and set it to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) JPEG playback 1 2 Repeat the steps 1~3 on page 44. Press / or / or Number keys to select the desired JPEG file. -/36 CD-R Collection 1 Pic-1 2 Pic-2 3 Pic-3 4 Pic-4 5 Pic-5 6 Pic-6 7 Pic-7 8 Pic-8 9 Pic-9 10 Pic-10 11 Pic-11 12 Pic-12 13 Pic-13 14 Pic-14 /0-9/Enter/Play Mode/DVD Menu To display a picture menu, press DVD MENU. (To return to a file menu, press TITLE.
MP3/JPEG playback (continued) Preparation: • Turn ON the TV and set it to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Setting the JPEG Slide-show You can continuously play back all JPEG files automatically as a slide-show. SETUP in the stop mode. 1 Press or to select “Picture”, Press then press Language Picture Sound Parental Other or ENTER. /Enter/Setup/Return or 2 Press Interval”.
Parental control Some discs are specified not suitable for children. Such discs can be prevented from play back with the unit. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Parental control setting 1 Press SETUP in the stop mode. Press or to select “Parental”. Then press or ENTER.
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) a DVD disc and press PLAY 1 Load or OPEN/CLOSE (see page 36).
Setting menu language You can select the language of the disc menu messages of DVDs. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) SETUP in the stop mode. 1 Press or to select “LanPress Language Picture Sound Parental Other guage”. /Enter/Setup/Return or ENTER. 2 Press Then press or Language Picture Sound Parental Other to select “Menu”.
Setting subtitle language The same subtitle language can always be selected even if you replace the disc or turn the power off. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) SETUP in the stop mode. 1 Press Press or to select “Lan- Language Picture Sound Parental Other guage” /Enter/Setup/Return 2 Press or ENTER. or Then press “Subtitle”.
Setting audio soundtrack language The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) SETUP in the stop mode. 1 Press Press or to select “Language” Language Picture Sound Parental Other /Enter/Setup/Return or ENTER. Press 2 Then or press Language Picture Sound Parental Other to select “Audio”.
Setting the aspect ratio of TV screen You can select the aspect ratio for your TV. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) SETUP in the stop mode. 1 Press or to select “PicPress Language Picture Sound Parental Other ture”. /Enter/Setup/Return 2 Pressor or ENTER, then press to select “Tv Screen”.
Setting on screen display/Status display of disc Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) Setting on screen display On screen display can be switched on or off when you press the DISPLAY button. SETUP in the stop mode. 1 Press or to select “Picture”. Press Language Picture Sound Parental Other /Enter/Setup/Return or ENTER, then press 2 Press or to select “Display”.
Dynamic Range Control DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light.) SETUP in the stop 1 Press mode. Press or “Sound”. Language Picture Sound Parental Other to select /Enter/Setup/Return Press or ENTER to se2 lect “DRC”.
Language code list Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (see pages 49-51).
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD/VCR DVD/VCR does not operate. • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in.
SYMPTOMS POSSIBLE SOLUTIONS PAGE No picture, or the screen is blurred • The S-VIDEO/COMPONENT selector is not set correctly. • The progressive scanning mode is active through the unit is or divided into two parts. connected to a TV via the VIDEO OUT jack. 16 35 No 4:3 (16:9) picture. • The setup does not match your TV. 52 No on-screen display. • Select Display On. 53 No surround sound. • The setup does not match your stereo system. 17 The unit or remote operation key is not functioning.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Inputs/Outputs: Video: Audio: Antenna: Hi-Fi frequency response: Hi-Fi dynamic range: AC 120V 60Hz Operation: 18W Stand by: 2W 3.6 kg (7.
Spanish Quick Use Guide (Guía para rápida consulta) Conexiones basicos El DVD/VCR debe conectarse “entre” la antena y el televisor. Primero, desconecte la antena del televisor y conéctela al DVD/VCR. Luego, conecte el DVD/VCR al televisor. Una vez que haya conectado la antena al DVD/VCR, usted tendrá que conectar el DVD/VCR al televisor.
Spanish Quick Use Guide (Guía para rápida consulta) Ajuste del reloj manual (continuacion) 6 Una vez ajustado el reloj, la fecha y la hora empiezan a funcionar automáticamente. 2 8 : 30AM WED Presione el botón SET + ó – para seleccionar el modo LANGUAGE, luego presione el botón ENTER.
Spanish Quick Use Guide (Guía para rápida consulta) COLOCACION Presione en el centro del videocassette hasta que se retraiga automáticamente. Grabacion de un programa de TV 1 Coloque un cassette en el cual la lengüeta de protección contra borrados accidentales esté intacta. El DVD/ VCR se encenderá automáticamente. EXTRACCION Presione el botón EJECT del DVD/VCR o cotrol remoto. Extraiga el videocassette. 2 PARA INICIAR LA REPRODUCCION Presione el botón PLAY. La reproducción comenzará.
Spanish Quick Use Guide (Guía para rápida consulta) Grebacion por temporizador de un solo toque (OTR) EJEMPLO: Una grabación por temporizador de un solo toque para 30 minutos. 1 2 3 4 5 Coloque un cassette con la lengüeta de protección contra borrados accidentales esté intacta. El DVD/ VCR se encenderá automáticamente. EJEMPLO: Programe una grabación con temporizador para el día 26, canal 125 (TV Cable), 11:00 - 11:30 hrs. PM en el programa de temporización número 1 (VELOCIDAD DE CINTA: SLP).
Spanish Quick Use Guide (Guía para rápida consulta) Ajuste de la selección de idioma 1 2 Presione SETUP en el modo de parada. El MENÚ DE AJUSTE de DVD aparecerá en pantalla. Presione para seleccionar Other. Language Picture Sound Parental Other Presione o ENTER para seleccionar OSD Language. Language Picture Sound Parental Other 4 Presione o ENTER y presione o para seleccionar el idioma deseado (porejemplo English) y presione ENTER. Presione STOP para terminar la reproducción.
Limited Warranty ! "#"$% & & '( ) * + !, -.& $&( / 0! 1 ) +! 1 !2 ! 1 !+ ""$3( Panasonic DVD/VCR Deck Limited Warranty Limited Warranty Coverage * ! 4! ) + ) + !2 4! 4 !1 0 * ) * + . + ! 1 ! !2. 5 4 . ! 1 +! .
Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index A Frame advance ............................................ 26,37 Accessory ............................................................ 7 Add/Delete Channels ........................................ 23 Angle ................................................................. 43 Aspect Ratio of TV Screen ................................ 52 Audio CD ........................................................ 6,41 Auto CH memory ............................................... 22 Auto Clock ...............
Remote Control ................................................. 10 Repeat Playback ............................................... 40 Review Playback .......................................... 26,37 Rewind .............................................................. 25 S Second Audio Program (SAP) ........................... 33 Slide-show ......................................................... 46 Slow Motion .................................................. 26,37 Spanish Quick Use Guide .............
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria. Km. 9.
? IMPORTANT NOTICE To ensure the AUTO CLOCK setup will be completed, please do the following: • Make sure to connect the Antenna or Cable to this deck before plugging the AC cord. • Plug in the AC Cord. DO NOT TURN ON the Deck yet. • Wait until the Auto Clock set up is completed. Once clock is set, you can turn the unit ON.
