Editing 07 4 Press PLAY to search a scene where you want to add the chapter mark. • Search the scene by using each operation button (F.FWD, REW, SKIP +, SKIP -, PAUSE/STILL, SLOW, CM SKIP) for the playback. ADD CHAPTER MARK NAME 11/25/2003 08:41 AM CHAPTER 1/3 LENGTH 00:02:03/00:30:17 7% ENTER/ SELECT ENTER RETURN BACK TITLE MENU END 5 At the point in the scene you want to add the chapter mark, press ENTER. The playback is paused and the position of the added chapter mark appears green.
Editing 07 4 Press SKIP + or SKIP - to select the chapter marks to be erased. Combining chapters VR mode By erasing the added chapter marks, the chapters can be combined. 5 Press ENTER. The chapter marks are erased and 2 chapters are combined into 1 chapter. 6 To continue erasing chapter marks, repeat steps 4 and 5. • To display the title menu, press RETURN. • To return to the normal screen, press TITLE MENU.
Editing 07 Erasing a scene (Edit title) VR mode You can erase an unnecessary scene from the original title. Erase the scene after checking the title. You cannot restore the erased scene. When you erase the scene, you can increase the disc space. 1 Press TITLE MENU to display the title menu. 2 Select the original title where a scene you want to erase is included. • Press or to select the original title. • Press to display the editing menu of original title. • Press or to select “EDIT TITLE”.
07 Editing Erasing an original title 1 2 VR mode You can erase an original title. Erasing the title deletes both the title and the recording saved under that title name. Since the erased title cannot be restored, please make sure that it contains nothing you want to keep. When you erase the title, you can increase the disc space. Press TITLE MENU to display the title menu. Select the original title you want to erase. • Press or to select the original title.
Editing 07 Changing a disc name VR mode Video mode Preparation: • Turn ON the TV and set to the video input mode. • Load the recorded DVD disc. • Press DVD/VCR to select the DVD mode. (The DVD indicator will light.) DVD-R You can change a disc name from the title menu. Changing a disc name 1 Press TITLE MENU to display the title menu. 2 • Press or to select “DISC NAME”. • Press to display the editing menu. • Press or to select “RENAME DISC”.
07 Editing Inputting characters There are two methods for inputting characters. Using the keyboard screen VR mode Video mode DVD-R This section explains the function of the keyboard screen and how to input characters. The disc name and the title name can be changed using the keyboard screen. Keyboard screen types The keyboard screen has three types of “Letters”, “Numbers” and “Signs”. The type can be switched over by pressing REW or F.FWD.
Editing 07 Erasing a character You can erase the input character. Erasing method 1 1 Press , , or to select “Back”. 2 Press ENTER. The last input character will be erased. 3 To erase the characters continuously, press ENTER. The input characters will be erased from the last to the top one by one. Selecting between uppercase and lowercase letters You can select either uppercase or lowercase letters when modifying your titles, using the keyboard screen with the “Letters” tab. 1 Press STOP.
08 Dubbing Chapter 8 Dubbing Dubbing a tape onto a disc VR mode Video mode DVD-R Preparation: • Turn ON the TV and set to the video input mode. • Load a source video tape and a disc for recording. • Remove the erase-protection tab of the source video tape to prevent the data from accidentally being erased. • Confirm the disc space before operation. VCR You can record video or audio on a video tape onto a disc. 1 Press DVD/VCR to set this unit to DVD mode. The DVD indicator will light.
Dubbing 08 Dubbing a disc onto a tape VR mode Video mode DVD-R VCR You can record both video and audio from a disc to a video tape. When a disc with a copy guard is used, a distorted image is recorded onto the video tape. 1 Press DVD/VCR to set this unit to VCR mode. The VCR indicator will light. 2 Press REC MODE/SPEED and select the recording mode. • When REC MODE/SPEED is pressed each time, “SP” or “SLP” is selected. • The recording mode is indicated on both the TV screen and the display window.
08 Dubbing Dubbing using other equipment VR mode Video mode DVD-R When a video is recorded using this unit Preparation: VCR • Turn ON the TV and set the unit to the video input mode. • Select the input mode in LINE1 (LINE2) INPUT setting on page 30. • Load a video tape where the erase-protection tab is not activated or a disc with enough recording space. • To record onto a video tape, set the unit to VCR mode, whereas to record onto a disc, set it to DVD mode.
Additional information 09 Chapter 9 Additional information Language code list Enter the appropriate code number for the initial settings “DVD MENU”, “AUDIO” and/or “SUBTITLE” (see page 24).
09 Additional information DTS Glossary A-B Repeat Playback Playback that repeats between two set points, A and B. angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs you can select the angle to view the scene from different angles. DTS stands for Digital Theater System.
Additional information 09 PBS Video mode Acronym for Public Broadcast System. The PBS channel transmits data for auto clock setting. This recording format is compatible with commercially available DVD players. playlist VR mode User-created titles based on each original title. This recording format is the basic DVD-RW recording format, and lets you enjoy the various editing functions available with this unit.
09 Additional information Error/Warning message list Power ON Playback Recording ERROR/WARNING MESSAGE CAUSE POSSIBLE SOLUTIONS SYSTEM ERROR PLEASE WAIT The power was shut down without completing the termination process due to a power failure or disconnection of the AC cord plug. (Abnormal termination) Wait until the message disappears. -- SYSTEM ERROR PLEASE WAIT DISC CHECKING The power was abruptly turned off before writing to the disc was completed. The data is now restoring.
Additional information Dubbing Disc setup Title Menu 09 ERROR/WARNING MESSAGE CAUSE POSSIBLE SOLUTIONS PAGE CANNOT RECORD PROTECTED IMAGE Recording was attempted on a copy protected video. You cannot record a copy protected video. 53 RECORDING INTERUPTED PROTECTED IMAGE The video was changed to a copyguard format in recording. You cannot record a copy protected video. 53 CANNOT RECORD IN VIDEO MODE. COPY IMAGE ONCE ONLY.
09 Additional information Troubleshooting Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
Additional information SYMPTOMS 09 POSSIBLE SOLUTIONS A Disc recorded using this recorder cannot be played back in other players. PAGE • Check that the disc is finalized. • Some DVD players will not play even if the disc has been finalized. • If the disc was recorded in VR mode, the other player must be RW compatible in order to play the disc. 28 10, 28 10, 28 VCR SYMPTOMS TV recording does not work. POSSIBLE SOLUTIONS • The erase prevention tab of the video cassette is broken off.
09 Additional information Handling discs Video head cleaning When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge. Damaged or dirty discs can affect playback and recording performance. Take care also not to scratch the label side of the disc. Although not as fragile as the recorded side, scratches can still result in a disc becoming unusable.
Additional information Specifications GENERAL Power supply ..................................................... AC 120V 60Hz Power consumption ....................................... Operation: 27W Standby: 2.5W (if display window is off.) Weight ............................................................. 12.1 lbs (5.5 kg) Dimensions ....................... Width:16-15/16 inches (430 mm) Height:3-7/8 inches (99 mm) Depth:12-1/4 inches (311.5 mm) Operating temperature ..................
09 Additional information 90 En VRB1351A_EN_81_92 90 04.6.
Additional information 09 91 En VRB1351A_EN_81_92 91 04.6.
Published by Pioneer Corporation. Copyright © 2004 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.
