Introduction Connections DIGITAL VIDEO DVD VIDEO PLAYER & VIDEO CASSETE RECORDER SD-V280 Basic setup Playback (VCR) Recording (VCR) OWNER’S MANUAL S 79077142 9876123000 2A70601A (E)COV ©2001 Toshiba Corporation 1 28/12/2001, 20:52 14 22 29 34 Other functions (VCR) 39 Basic playback (DVD) 42 Advanced playback (DVD) 47 Function setup (DVD) 55 Others ? 2 63
Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFEGUARDS Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS 4 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14.
IMPORTANT SAFEGUARDS / Power Source Introduction 25. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 26. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 27.
Introduction Precautions Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD/VCR. Do not leave rubber or plastic products in contact with the DVD/VCR for a long time. They will leave marks on the finish. The top and rear panels of the DVD/VCR may become warm after a long period of use.
Notes on discs Structure of disc contents Do not touch the playback side of the disc. Introduction On handling discs Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. DVD video disc DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on discs (continued) About this owner’s manual This owner’s manual explains the basic instructions of this DVD/VCR. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD/VCR may not respond to all operating commands. This is not a defect in the DVD/ VCR. Refer to instruction notes of discs. Playable discs This DVD/VCR can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx.
Contents Basic playback (DVD) IMPORTANT SAFEGUARDS .......................... 2 Power Source ................................................... 5 Precautions ...................................................... 6 Notes on discs .................................................. 7 Contents. .......................................................... 9 Identification of controls ................................. 10 Playing a disc .................................................
Introduction Identification of Controls See the page in for details.
Display window VTR indicator (VCR) Tape in indicator (VCR) CATV channel indicator (VCR) Introduction Play indicator (DVD) Play indicator (VCR) VTR C SLP CH M S Multifunctional indicator Tape speed indicator Timer Recording indicator (VCR) Recording indicator (VCR) PM AM/PM indicator VCR operation Status Press CALL to display the information on the screen. To cancel the display, press CALL again.
Introduction Identification of Controls (continued) The instructions in this manual describe the functions on the remote control. See the page in for details.
Introduction Inserting Batteries 1 Open the battery compartment cover in the direction of the arrow. 2 Install two "AAA" batteries (supplied), paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cover. Battery precautions The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
Connections Antenna connections If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber,skip ahead to page for the proper connections. Antenna to DVD/VCR connection The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
DVD/VCR to TV connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Connections CATV (CABLE TV) connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception.
IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
Connections Connecting to a TV Connect the DVD/VCR to your TV. For details of output sound, see 39 .
Connecting to an audio system and TV equipped with S video input/component video inputs Signal flow DVD OUT ANALOG AUDIO DVD, VCR OUT S IN Y VIDEO VIDEO PB L AUDIO L(MONO) AUDIO PR R R (FROM ANT) 7230007448 To PR VIDEO OUT To PB VIDEO OUT OUT (TO TV) 3 (red) To S VIDEO OUT UHF/VHF COMPONENT L R To ANALOG AUDIO OUT To wall outlet LINE NI1 Connections (white) DIGITAL AUDIO OPTICAL COAXIAL CH 4 To Y VIDEO OUT To audio inputs of the amplifier (red) (white) S video cable (not s
Connections Connecting to optional equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. For connection to your TV, see “Connecting to a TV” For details of output sound, see 52 . .
Warning • When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the onscreen displays 55 57 . Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (DVD/VCR), excessive noise may be output from the analog stereo jacks.
Basic setup DVD/VCR POWER Setting the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). TV/VCR Setting the video channel 1 Press POWER to turn on the DVD/VCR. 2 Press DVD/VCR to select the VCR mode. The VCR indicator on the front panel will light.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. 2, 3 2, 3 1, 4 Setting the language • Turn ON the TV and set to the video input mode. • Press DVD/VCR to select the VCR mode. (The VCR indicator will light.) 1 Press VCR MENU. If you use the unit for the first time and press VCR MENU, instead of the main menu screen on the right the “SYSTEM SET UP” menu screen in step 2 may appear.
Basic setup Clock setting CALL POWER 2, 3 The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. As the DVD/VCR searches for a receivable station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes to set itself.
To set standard time To set daylight saving time In the rare event that you live within broadcast range of two stations in two different time zones, the DVD/VCR may recognize the wrong station for the Auto Clock set. To correct the situation: 1 Press VCR MENU. 1 Press VCR MENU. Press SET + or – to select “SYSTEM SET UP”, then press ENTER. OFF OFF MENU TIMER REC SET AUTO REPEAT ON ON SAP CH SET UP SYSTEM SET UP 〈+/-/ENTER/MENU〉 2 Press SET + or – to select “SYSTEM SET UP”, then press ENTER.
Basic setup Clock setting (continued) If the auto clock process did not set the date and time correctly, you must set them manually for timer recordings and daylight saving time. 2-4 2-4 1, 6 Manual clock setting EXAMPLE: Setting the clock to "8:30 AM" March, 23 (SAT), 2002. 1 Press VCR MENU. 2 Press SET + or – to select “SYSTEM SET UP”, press ENTER.
Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
Basic setup Tuner setting (continued) NUMBER BUTTONS 1, 2 1, 2 3 To ADD/DELETE channels 1 Noise elimination Repeat the step 1 on page 27. Then press SET + or – to select the “ADD/DELETE” and press ENTER. CH SET UP When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to "ON".
Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked and . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Basic setup Playback (VCR) Erase prevention tab Automatic power ON When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Playback (VCR) Cassette tape playback To play a prerecorded tape. REW PLAY FWD STOP Playback Rewind or forward the tape Preparation: Stop the playback or recording with STOP. • Turn ON the TV and set to the video input mode. • Press DVD/VCR to select the VCR mode. (The VCR indicator will light). To rewind the tape: 1 Press REW. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). To forward the tape: Press FWD.
TRACKING +/– REW ATR Special playback CM SKIP PLAY FWD STOP PAUSE/STILL SLOW Picture search Adjusting tracking condition SPEED SEARCH TIMES TAPE SPEED PICTURE SEARCH SPEED PRESS ONCE PRESS TWICE SP (Standard Play) 3X 5X LP (Long Play) 7X 9X SLP (Super Long Play) 9X 15 X Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
Playback (VCR) VCR MENU Convenient function CLOCK COUNTER SET +/– ENTER COUNTER RESET ZERO RETURN PLAY STOP Repeat playback Zero return function The entire video tape will be played until its end. The tape will This function makes tape-rewinding stop at the counter 00:00:00 automatically rewind to the beginning and the playback will be position automatically. repeated. 1 Press VCR MENU. Press SET + or – to select “AUTO REPEAT”.
DVD/VCR CLOCK COUNTER STOP INDEX Video index search system Clock/counter display Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window. COUNTER H M S CLOCK C SP CH PM Press DVD/VCR. The DVD mode and the VCR mode alternate with each other in the display. DVD mode VTR H M This function enables you to locate the beginning of any recording made on the VCR.
Recording (VCR) DVD/VCR Recording a TV program 4 Recording and viewing the same TV program 4 2 5 Recording a TV program Preparation: • Turn ON the TV and set to the video input mode. • Press DVD/VCR to select the VCR mode. (The VCR indicator will light.) 1 4 Press Number button or CH channel to be recorded. / to select the CH 110 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. 1-9 2 Press SP/SLP to select the desired tape speed SP or SLP.
TV/VCR STOP PAUSE/STILL To stop recording Press STOP to stop recording. " " will appear on screen for about 4 seconds. Auto Rewind feature This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape. Recording (VCR) To stop recording temporarily Press PAUSE/STILL to avoid recording unwanted material. Press again to continue the recording. " " will appear on screen for about 4 seconds.
Recording (VCR) DVD/VCR One-touch Timer Recording (OTR) 4 The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. 4 5 2 STOP One-touch Timer Recording (OTR) Preparation: • Turn ON the TV and set to the video input mode. • Press DVD/VCR to select the VCR mode. (The VCR indicator will light.) 4 Press Number button or CH channel to be recorded. / to select the CH 110 Example: One-touch Timer Recording for 30 minutes.
DVD/VCR TAPE EJECT Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. 2, 3 1-3 CANCEL 1, 5 TIMER REC Timer recording Preparation: 1 To enter other programs, repeat step 2 through 4. • To return to the normal screen, press VCR MENU twice. Press VCR MENU. Select “TIMER REC SET”, then press ENTER.
Recording (VCR) DVD/VCR Timer recording (continued) SET +/– ENTER CANCEL VCR MENU TIMER REC Setting procedure To set daily/weekly timer To confirm or cancel a program Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MOSA: Monday to Saturday) Timer recording Follow the procedure of timer recording on the previous page. At picture 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER. 1 If the Timer has been activated, press TIMER REC to deactivate the Timer.
Other functions (VCR) DVD/VCR Stereo recording and playback / Separate Audio Program (SAP) TRACKING ENTER CANCEL TIMER REC Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. STEREO Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a separate audio program when viewing a selected channel. This function applies only when the program is broadcast in multilanguages through the SAP broadcast system.
Other functions (VCR) DVD/VCR Duplicating a video tape 2 If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. 4 1 5 Duplicating a video tape Connection with second video recorder Preparation: • Turn ON the TV and set to the video input mode. • Press DVD/VCR to select the VCR mode. (The VCR indicator will light.) • Load a cassette tape with the erase prevention tab intact.
Other functions (VCR) 2 Recording a DVD/CD disc You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR. 4 3 1 5 Duplicating a DVD or CD disc Preparation: 1 Press SP/SLP to select the desired tape speed SP or SLP. 2 Press DVD/VCR to select the DVD mode. 3 Press PLAY to start playback. 4 Press REC to start recording. 5 Press STOP if you finish recording. Other functions (VCR) • Turn ON the TV and set to the video input mode.
Basic playback (DVD) Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. 4 1 DVD VCD CD Display window 2 3, 5 STOP PLAY Basic playback Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD/VCR.
DVD/VCR OPEN/CLOSE To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD/VCR, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Basic playback (DVD) Playing a disc (continued) You can play discs at various speeds, and resume playback from the location where you stopped playback. REW PLAY FWD PAUSE/STILL DVD VCD CD Playing in fast reverse or fast forward directions Press REW or FWD during playback. To resume normal playback Press PLAY. REW: Fast reverse playback FWD: Fast forward playback Each time you press the REW or FWD button, the playback speed changes.
STOP PLAY SLOW DVD VCD Playing in slow-motion To resume normal playback Basic playback (DVD) Press SLOW during playback. Press PLAY. Each time you press the SLOW button, the slow-motion speed changes. Note: The sound is muted during slow-motion playback. DVD VCD CD 1 Resuming playback from the same location Press STOP at the location where you want to interrupt playback. To start playback from the beginning regardless of the location where you stopped playback 1 Press STOP twice.
Basic playback (DVD) Locating a specific title, chapter, or track Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or track. DVD video disc Title 1 Chapter 1 DVD 1 Title 2 Chapter 2 Chapter 1 DVD VCD CD Chapter 3 Track 1 Track 2 Track 3 Track 4 Track 5 Locating a title using the top menu Press TOP MENU. The top menu appears on the TV screen. e.g.
Advanced playback (DVD) Repeat playback / Random playback You can play a specific title, chapter, track, or segment repeatedly. And also you can play titles, chapters within a title, or tracks in random order. CANCEL PLAY MODE A-B RPT PLAY DVD VCD CD Repeat playback and Random playback Each time you press the PLAY MODE button, the repeat mode changes as follows. 2 Press PLAY. Chapter Repeat The DVD/VCR starts repeat playback or random playback.
Advanced playback (DVD) 2 Playing in a favorite order You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. (Memory playback) 3 ▲/▼/ / CANCEL 1 4 DVD VCD CD 1 Setting titles, chapters, or tracks in a favorite order To cancel the programmed selections Press MEMORY.
Zooming a picture You can magnify areas within a picture. ▲/▼/ / ENTER CANCEL ZOOM DVD Zooming a picture To resume normal playback Press ZOOM during normal, slow or still playback. While “ZOOM” is selected, press ZOOM repeatedly to turn off the icon. Picture restores the size when the icon disappears. Advanced playback (DVD) The DVD/VCR enters the zoom playback mode and displays the icon. e.g. • The ENTER button cannot cancel zoom playback if you have turned off the icon by selecting “EXIT.
Advanced playback (DVD) Selecting the camera angle If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. 2 CANCEL 1, 2 DVD 1 Changing the camera angle Press ANGLE while playing a scene recorded with multiple angles. While playing a scene recorded with multiple angles, the angle icon ( ) flashes in the DVD display. Press the ANGLE button while the angle icon is flashing. e.g. 1 2 3 2 To turn off the angle number display Press CANCEL.
Selecting subtitles You can display subtitles on the TV screen and select a subtitle language from those included on the DVD video disc. ▲/▼/ / CANCEL SUB TITLE Good evening! DVD 1 Bonsoir! `Buenas tardes! Selecting a subtitle language Press SUB TITLE during playback. To turn subtitles on or off 1 Press SUB TITLE during playback. The current subtitle setting is displayed. Off JPN 1 FRE 1 SPA 1 The abbreviation of the language appears instead of the language name.
Advanced playback (DVD) Selecting a language You can select a preferred language and sound recording system from those included on the DVD video disc. 2 CANCEL Good morning! DVD VCD 1 Bonjour! 1, 2 ¡Buenos días! Selecting a playback audio setting Press AUDIO during playback. The current audio setting is displayed. e.g. ENG1 PCM 2CH ENG2 D 2CH 2 Press AUDIO or / while the audio setting is displayed on the TV screen.
On-screen display operation DISPLAY When you turn on the on-screen display, you can view information on operational status and access features and settings. / ENTER DVD VCD CD On-screen display operation Press DISPLAY. * e.g. When playing a DVD video disc 2 3 0:08:16 Title number (Track number) * : Locate a title or track using the number buttons. 46 Chapter number * : Locate a chapter using the number buttons.
Advanced playback (DVD) On-screen display operation (continued) DISPLAY / ENTER DVD VCD CD On-screen display operation (continued) number (Track number) * : Title Locate a title or track using the number buttons. 46 2 3 Chapter number * : Locate a chapter using the number buttons. 46 : To stop playback. 43 : Playback starts from the beginning of the current chapter or track. 46 : Fast reverse playback 44 : To start playback. 42 : Fast forward playback 44 : To locate succeeding chapters or tracks.
Function setup (DVD) Customizing the function settings You can change the default settings to customize performance to your preference. DVD VCD CD 1 2 3, 4 RETURN 1, 6 Setting procedure Press SET UP during stop. The following on-screen display appears. 4 Change the selection by / or other buttons, by referring to the corresponding pages 56 , then press ENTER. 5 Repeat steps 3 and 4 to change other settings. 6 Press SET UP.
Function setup (DVD) Setting Details TV Shape DVD Audio Out Select DVD VCD CD Page To select a picture size according to the aspect ratio of your TV. 57 To select an output sound format corresponding to your system connection. 57 To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late hours playback. 57 Dynamic Range Control DVD Karaoke Vocal DVD To turn on or off the vocal output during DVD KARAOKE disc playback.
Setting details AB C AB C Audio Audio Out Select Bitstream Dynamic Range Control On Karaoke Vocal Off Picture TV Shape 4:3 LB TV Shape 4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. Notes • The displayable picture size is preset on the DVD video disc. Therefore, the playback picture of some DVD video discs may not conform to the picture size you select.
Function setup (DVD) Customizing the function settings (continued) Setting details Karaoke Vocal DVD Off: The primary vocal is not output. On: The primary vocal is output when it is recorded on the disc. Notes: • The vocal output feature is used during playback of Dolby Digital (multi-channel) recorded DVD KARAOKE discs. This feature allows you to turn off vocal audio tracks, or restore them for background accompaniment.
Audio Language English: French: Spanish: Others: 3) Press the / buttons to shift and select the second character by pressing the / buttons. DVD To play sound tracks in English. To play sound tracks in French. To play sound tracks in Spanish. To make a further choice. After pressing the ENTER button, follow steps 1) - 4) below. 1) Obtain the abbreviation of the preferred language from the list 63 . 2) Select the first character by pressing the / buttons.
Function setup (DVD) Customizing the function settings (continued) Setting details AB C AB C Display On-Screen Displays On Background Gray Screen Saver On On-Screen Displays DVD Off: Operational modes (e.g. “ displayed. On: Operational modes (e.g. “ displayed on-screen. Background DVD VCD VCD Operation Pause/Still Parental Lock Title Stop PBC CD ”, “ ”) are not ”, “ ”) are DVD Auto: For normal use. Still and fast motion images can be paused.
3) Press the / buttons to select the parental lock level, then press the ENTER button. (Continued) 1) Press the number buttons to create a personal 4-digit security code, then press the ENTER button. If you make a mistake before pressing the ENTER button, press the CANCEL button and enter your 4-digit security code again. 2) Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list below.
Function setup (DVD) Customizing the function settings (continued) Setting details Title Stop AB C DVD Initial Setup On-Screen Language ENG TV Shape 4:3 LB Audio Out Select Bitstream Off: The DVD/VCR continues after playback of a title is completed. On: The DVD/VCR stops after playback of a title is completed. PBC VCD Off: When playing a VIDEO CD without using the menu. On: To use the menu when playing a PBC-featured VIDEO CD.
Others Table of languages Table of languages and their abbreviations Abbreviation ––– Abbreviation No alternate language Chinese Dutch English French German Italian Japanese Korean Malay Spanish Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Belorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scottish Gaelic Galician GN GU HA HI HR HU HY IA
Others Before calling service personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD/VCR DVD/VCR does not operate. • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. • Select the DVD or VCR mode before operating. 5 – – 5 30,42 14~17 22 No picture.
Specifications General / input / output / supplied accessories GENERAL Power supply Power consumption Weight Dimensions Tuner S/N ratio Harmonic distortion Wow and flutter Dynamic range Operating conditions Others Antenna input/output RF channel output Color system Video head Audio track Hi-Fi frequency response Hi-Fi dynamic range F.FWD/REW time at 25˚C (77˚F) Applicable disc Frequency range AC 120V 60Hz Operation: 20W, Stand by: 4W 9.9lbs (4.
Others LIMITED WARRANTY DVD/VCR Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the original purchaser and to no other purchaser or transferee.
LIMITED WARRANTY DVD/VCR (continued) How to Obtain Warranty Service (1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem. (2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days after you find a defective product or part. (3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.
2A70601A U 02/02 2A70601A (E)p64-BACK Printed in Thailand 68 28/12/2001, 20:59