OWNER'S MANUAL R DVD PLAYER/Hi-Fi VIDEO CASSETTE RECORDER VRDVD4000 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV (Cable TV), set this menu option to the "TV" mode. ORION WEBSITE FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
IMPORTANT SAFEGUARDS / Power Source 25. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 26. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 27.
Features DVD/CD Player/Video Cassette Recorder • DVD/CD player with Video Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs. • High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution.
Contents Before using your unit Disc playback operation IMPORTANT SAFEGUARDS .......................... 3 Power Source ................................................... 5 Features ........................................................... 6 Contents ........................................................... 7 Parts and functions .......................................... 8 Display ............................................................. 9 Remote control ...........................................
Parts and functions Front VCR/DVD mode selector button PLAY button Cassette Loading Slot OPEN/CLOSE button STOP button Disc tray EJECT button VCR POWER VIDEO IN CHANNEL DVD VCR/DVD DVD L - AUDIO IN - R VCR Display window Remote sensor POWER button CHANNEL s / t buttons AUDIO (L/R)/ VIDEO IN jacks DVD indicator REC button REW (Rewind) button VCR indicator FF (Fast Forward) button Rear AC power cord DVD OUTPUT DIGITAL AUDIO OPTICAL COAXIAL AUDIO S-VIDEO COMPONENT L IN Y VIDEO (
Display Display window 1 2 3 4 11 5 6 10 No. 1 9 8 7 Display Description VCR mode VCR 2 Playback (lights) / Auto resume (flashes) 3 Still picture 4 DVD DVD disc is inserted. 5 CD CD is inserted.
Remote control POWER EJECT OPEN/CLOSE VCR/DVD 0-9 POWER OPEN/ CLOSE EJECT VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 / TRACKING/SET –/+ / SELECT/ENTER CH TRACKING/ SET — TRACKING/ SET + SELECT/ ENTER CH DVD MENU DISPLAY/CALL INPUT SELECT CH / SET UP/ VCR MENU CLEAR/ CANCEL RETURN ZOOM TITLE REPEAT A-B DVD MENU SET UP/VCR MENU CLEAR/CANCEL RETURN ZOOM TITLE REPEAT A-B AUDIO/AUDIO SELECT AUDIO/ MEMORY/ ANGLE/ CLOCK/ AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER TIME
Remote control Inserting Batteries 1 Open the battery compartment cover in the direction of the arrow. two "AAA" batteries (not 2 Install supplied), paying attention to the 3 Replace the compartment cover. polarity diagram in the battery compartment. Battery precautions The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
Basic connections If you are using an antenna system, follow the instructions. If you are a cable (CATV) subscriber,skip ahead to page 14 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
Basic connections DVD/VCR TO TV CONNECTION After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
CATV (CABLE TV) connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception. 1 DVD/VCR TV IN (ANT.
CATV (CABLE TV) connections IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system.
Playback Connection The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Connect to a TV with Audio/Video Output Use the supplied AUDIO/VIDEO Cord.
Playback connection Connect to a Stereo Amplifier with Audio Output If your TV has COMPONENT VIDEO IN jack, you can connect the DVD/VCR to the TV with a COMPONENT cable (not supplied) as shown below. COMPONENT VIDEO output jack can send high-quality video signal to a TV than S-Video output.
Setting the Video Channel / Setting the language Setting the Video Channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). 1 Press POWER to turn on the DVD/VCR. VCR/DVD to select the VCR mode. The VCR indicator 2 Press on the front panel will light.
Clock setting You must set the date and time for timer recordings. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light) EXAMPLE: Setting the clock to "8:30 AM" March, 23 (SAT), 2002. POWER OPEN/ CLOSE EJECT VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 1 Press VCR MENU. The VCR menu screen will appear.
Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
To ADD/DELETE channels / Noise elimination To ADD/DELETE channels You can add the channels you want or delete the channels you do not want manually. POWER OPEN/ CLOSE EJECT Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light) the step 1 on page 20. 1 Repeat Then press or to select the VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 “ADD/DELETE” option and press ENTER.
Loading and Unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. VCR Erase prevention tab Automatic power ON When you insert a cassette tape the VCR power will turn ON automatically.
Cassette tape playback Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light) POWER OPEN/ CLOSE EJECT a prerecorded tape 1 Load (When loading a cassette tape VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 start playback 2 To Press PLAY. CH TRACKING/ SET — without the erase prevention tab, playback will start automatically). TRACKING/ SET Playback will start.
Special playback Picture Search Repeat playback Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press F.FWD x 1 or x 2 during the playback. To return to playback: Press PLAY. The whole of the video tape will be played until its end. Then the tape will be winded until its beginning and the playback will be repeated.
ZERO RETURN function / Video index search system ZERO RETURN function This function makes tape-rewinding stop at the counter 00:00:00 position automatically. 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light) CALL.
Recording a TV program Recording and viewing the same TV program POWER 1 OPEN/ CLOSE EJECT 2 Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light) VCR/DVD 3 DISPLAY/CALL a cassette tape with the erase 1 Load prevention tab intact. The VCR will automatically turn on. 4 5 6 INPUT SELECT 7 8 9 0 Press SPEED to select the desired tape 2 speed SP or SLP.
Recording a TV program To stop recording Press STOP to stop recording. " " will appear on screen for about 4 seconds. POWER OPEN/ CLOSE EJECT To stop recording temporarily VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 NOTES: • The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode. • You can select a recording channel in the recording pause mode.
One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. POWER OPEN/ CLOSE EJECT Example: One-touch Timer Recording for 30 minutes.
Timer Recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. POWER OPEN/ CLOSE EJECT Preparation: • Press VCR/DVD to select the VCR mode. Load a cassette tape with the erase prevention tab intact. • Make sure with CALL that the time and date are correct.(see page 27).
Timer-Recording Timer Recording Special case Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA: Monday to Saturday) Timer recording Follow the procedure of timer recording on the previous page. At picture 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER. When you press SET – repeatedly, the indicator at DATE will change as follows, in case today is Friday.
Stereo recording and playback / Separate Audio Program (SAP) Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.
Duplicating a video tape/Duplicating a disc material onto a video tape Duplicating a video tape If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. a blank cassette tape with the erase prevenPress REC/OTR on the recording VCR, then press 1 Load 4 PAUSE/STILL. tion tab intact into the recording VCR. Load a previously recorded tape into the playback VCR or CAMCORDER.
Disc This unit applies to DVD discs from Region 1 only. The loaded Disc (DVD, Audio-CD and MP3-CD) will be recognized automatically. The suitable Disc-format are: DVD, CD-R and CD-RW. Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or Photo CD to prevent accidental erasure of prerecorded material. Some DVDs is played back with a Copy guard system. In case of a dubbing on video tape, strong disturbance may occur. This is not a defect of this DVD/VCR.
Setting setup language The setup language can be selected. POWER OPEN/ CLOSE EJECT Preparation: • Turn ON the TV and set to the video input mode. • When using an amplifier, switch on the amplifier. VCR/DVD to select the 1 Press DVD mode. (The DVD indicator VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 will light) “No Disc” will appear on the screen. (If DVD disc has already loaded, the playback will start automatically.) SET UP in the stop mode.
Playback procedure POWER OPEN/ CLOSE EJECT Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 OPEN/CLOSE. 1 Press The disc tray will open. a disc onto the tray. 2 Place Hold the disc, position it with the printed label side up, align it with the guides, and place it in its proper position. CH TRACKING/ SET — TRACKING/ SET + PLAY or OPEN/CLOSE.
Special playback Note: there may be a slight delay between you pressing the button and the function activating. Fast Forward Playback Press F.FWD during normal playback. Each press of F.FWD will increase the speed of the search x2, x8, x30, x100. (in case of Audio-CD: x4 and x8 are available) • To resume normal playback, press PLAY. POWER OPEN/ CLOSE EJECT VCR/DVD Review Playback 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT Press REW normal playback.
Zooming Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) POWER Zooming OPEN/ CLOSE EJECT VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during playback. 1 Press The center part of the image will be zoomed in.
Repeat playback POWER OPEN/ CLOSE EJECT Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) VCR/DVD Title, Chapter, Track, Random Playback 1 2 3 DISPLAY/CALL REPEAT PLAYBACK 4 5 6 INPUT SELECT 7 8 9 0 Press PLAY MODE repeatedly to select “Chapter Repeat”, 1 “Title Repeat” or “ALL”.
Memory playback/Random playback Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) Memory playback POWER OPEN/ CLOSE EJECT You can arrange the order of titles, chapter or tracks on the disc. VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 1 Press MEMORY.
MP3 Playback This player can play back the MP3-data which recorded on CD-R or CD-RW. To produce the MP3-data, you need a WindowsPC with CD-ROM drive and a MP3-encoding Software (not supplied). The Apple-HFS-System can not be played. MP3 CD Information Limitations on MP3 CD playback • MP3 CD is the disc that standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”. • The directory and file names of the MP3 CD must be corresponded to the ISO standardized files.
Changing soundtrack language / Changing Subtitles language Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) POWER OPEN/ CLOSE EJECT VCR/DVD Changing soundtrack language 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT You can select the language when you play a multilingual disc. AUDIO during playback. 1 Press The current soundtrack language is displayed. 7 8 ENG1 ENG2 FRE1 0 9 2CH 5.
Changing angles / Title selection / DVD menu Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) POWER OPEN/ CLOSE EJECT Changing Angles VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. ANGLE during playback. 1 Press The current angle will appear.
Parental control Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) Parental control setting POWER 1 OPEN/ CLOSE EJECT 2 VCR/DVD 3 DISPLAY/CALL SETUP MENU in the stop mode. 1 Press Press or to select “Operation”.
Parental control (Continned) POWER OPEN/ CLOSE EJECT VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 CH TRACKING/ SET — TRACKING/ SET Country/Area AUSTRALIA BELGIUM CANADA CHINA CHINA HONG KONG DENMARK FINLAND FRANCE GERMANY INDONESIA ITALY JAPAN MALAYSIA Code AU BE CA CN HK DK FI FR DE ID IT JP MY Country/Area NETHERLANDS NORWAY PHILIPPINES RUSSIAN FEDERATION SINGAPORE SPAIN SWEDEN SWITZERLAND TAIWAN THAILAND UNITED KINGDOM UNITED STATES Code NL NO PH RU SG ES SE CH TW TH GB US
Setting menu language You can select the language of the disc menu messages of DVDs. POWER OPEN/ CLOSE EJECT Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) SET UP in the stop mode. 1 Press Press or to select VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 “Language”. AB C Picture TV Shape 4:3LB : Select or to select “Disc Press 2 Menu Language”.
Setting subtitle language The same subtitle language can always be selected even if you replace the disc or turn the power off. POWER OPEN/ CLOSE EJECT Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) SET UP in the stop mode. 1 Press Press or to select VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT AB C “Language” Picture TV Shape 4:3LB : Select 7 8 : Enter 0 9 or 2 Press Language”.
Setting audio soundtrack language The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) SET UP in the stop mode. 1 Press or to select Press “Language” AB C Picture TV Shape 4:3LB POWER OPEN/ CLOSE EJECT VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 0 9 : Select or 2 Press Language”.
Setting the aspect ratio of TV screen You can select the aspect ratio for your TV. POWER 1 OPEN/ CLOSE EJECT 2 3 Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) SET UP in the stop mode. 1 Press or to select Press VCR/DVD DISPLAY/CALL AB C “Picture”. Picture TV Shape 4:3LB 4 5 6 INPUT SELECT 7 8 9 0 : Select Press ENTER.
Setting on Screen display On screen display can be switched on or off when you press the buttons. POWER 1 OPEN/ CLOSE EJECT 2 3 VCR/DVD DISPLAY/CALL Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) SET UP in the stop mode. 1 Press Press or to select “Display” AB C Picture TV Shape 4:3LB 4 5 6 INPUT SELECT 7 8 9 0 : Select or to select “On2 Press Screen Displays”.
Setting Audio POWER 1 4 7 OPEN/ CLOSE EJECT 2 3 5 6 8 Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) Audio Out Select Select the output sound format corresponding to your system connection. For details of sound recording systems, see on page 53. VCR/DVD DISPLAY/CALL Press SET UP in the stop mode. 1 Press or to select “Audio”. INPUT SELECT 2 0 9 Press or to select “Audio Out Select”, then press ENTER.
Setting Operation Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) POWER OPEN/ CLOSE EJECT Pause/Still Select the resolution of still pictures. VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 Press SET UP in the stop mode. 1 Press or to select “Operation”.
Setting Background/Setting Screen Saver Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) Setting Background Select the background color or background picture. POWER OPEN/ CLOSE EJECT VCR/DVD 1 2 3 DISPLAY/CALL 4 5 6 INPUT SELECT 7 8 9 0 SET UP in the stop mode. 1 Press Press or to select “Display”.
Setting Initial Setup/Output Sound Conversion Table You can install the initial system setting. Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the DVD mode. (The DVD indicator will light) Setting Initial Setup POWER 1 OPEN/ CLOSE EJECT 2 3 VCR/DVD Press SET UP in the stop mode. 1 Press or to select “Initial DISPLAY/CALL Setup”.
Status display of Disc You can view Information on operation status and access and setting. 1 Each Press of DISPLAY, the status display of the disc will appear on the screen and change as follows. Symbol mark of the feature you selected is displayed. DVD T 2C 3 T 2C 3 0:08:16 -0:21:28 CD EAM ZOOMEPM T 1 or EAM 2CH 2CH 2CH IOOM X IOOM X C C C C 1 1 1 PCM OFF BIT RATE T 1 T 2C3 9.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD/VCR DVD/VCR does not operate. • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in.
Problems and troubleshooting / Video head cleaning SYMPTOMS POSSIBLE SOLUTIONS PAGE No 4:3 (16:9) picture • The setup does not match your TV. 48 No on-screen display • Select Display On. 49 No surround sound • The setup does not match your stereo system. 17 The unit or remote operation key is not functioning. • Turn off the unit and unplug the AC power cord for several minutes, then replug it. – • Check the Parental setup. 43 Playback does not start when the title is selected.
Specifications GENERAL Power supply: Power consumption: AC 120V 60Hz Operation: 20W Stand by: 3W 9.9lbs (4.5 kg) Width : 16-15/16 inches (430 mm) Height : 3-7/8 inches (99 mm) Depth : 12-3/8 inches (314.
SANSUI limited WARRANTY DVD PLAYER / VIDEO CASSETTE RECORDER COMBINATION UNIT ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of ninety (90) days from date of original purchase in the United States only.
Memo ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2A70101A Z 02/01 2A70101A(50-BACK) Printed in Thailand 60 29/11/2001, 13:50