Product Specs

ManualsBrandsORing ManualsElectronicsWiFi Module

OWMH-DS6311-01 Product Specification

Version:0.1

Date: 2018.11.14

Page 1 of 8

OWMH-DS6311-01

Product Specification

Version

Issue date

Changes

Remark

0.1

2018/11/14

Initial Version

IMPORTANT

This document contains important Information and therefore

should not be disclosed to third parties without prior written consent of ORing Industrial Networking Co. Ltd.

Signature:

Author:

Reviewed by:

Approved by:

Remarks:

Rino Pan

Summary of content (9 pages)

PAGE 1
OWMH-DS6311-01 Product Specification Version:0.1 Date: 2018.11.14 OWMH-DS6311-01 Product Specification Version 0.1 Issue date 2018/11/14 Initial Version Changes Remark IMPORTANT This document contains important Information and therefore should not be disclosed to third parties without prior written consent of ORing Industrial Networking Co. Ltd.
PAGE 2
Version:0.1 Date: 2018.11.14 OWMH-DS6311-01 Product Specification 1. Introduction OWMH-DS6311-01 module is designed for easy-design-in low cost and suitable for Wi-Fi applications. The module can support WAN, LAN, UART, SPI, I2S, SDXC and GPIO interfaces and work for 2T2R mode. 2. Technical specification Items Specification Supported Standard and Protocol IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a, IEEE 802.3, IEEE 802.
PAGE 3
Version:0.1 Date: 2018.11.14 OWMH-DS6311-01 Product Specification index 20 MHz channel 800 ns 40 MHz channel 400 ns 800 ns 400 ns 8 13.00 14.40 27.00 30.00 9 26.00 28.90 54.00 60.00 10 39.00 43.30 81.00 90.00 11 52.00 57.80 108.00 120.00 12 78.00 86.70 162.00 180.00 13 104.00 115.60 216.00 240.00 14 117.00 130.00 243.00 270.00 15 130.00 144.40 270.00 300.00 IEEE 802.11g：54/48/36/24/18/12/9/6(adaptive) IEEE 802.11b：11/5.
PAGE 4
OWMH-DS6311-01 Product Specification Version:0.1 Date: 2018.11.14 Change password OPENWEP SHAREDWEP WEPAUTO WPA WPA-PSK WLAN Security Mode WPA2 WPA2-PSK WPAPSKWPA2PSK WPA1WPA2(WPA and WPA2 hybrid mode) 802.1x 3. Software features  Support AP（Access point）、Client (Wi-Fi Station) mode、Repeater(AP-Client) mode  AP mode o Default operation mode. In this mode, the module work as an Access Point, don't need any configuration.
PAGE 5
OWMH-DS6311-01 Product Specification Version:0.1 Date: 2018.11.14 5. Module Dimension: 80x70x1.
PAGE 6
Version:0.1 Date: 2018.11.14 OWMH-DS6311-01 Product Specification 6. Pin Assignment J1: Description Function Pin # Pin # Function Description 5V input 5V input 5V input 3.3V input 3.3V input 3.3V input Power ground Media-dependent interface A Media-dependent interface A Power ground Media-dependent interface B Media-dependent interface B Power ground Media-dependent interface C Media-dependent interface C Power ground 5V 5V 5V 3.3V 3.3V 3.
PAGE 7
Version:0.1 Date: 2018.11.
PAGE 8
OWMH-DS6311-01 Product Specification Version:0.1 Date: 2018.11.14 7. Memory configuration Depending on customer's request, the module can be shipped with following configuration: Flash size: 8MB, 16MB NOR Flash DDR2 size: 64MB, 128MB 8. Mechanical Application Notes 1. 2. 3. 4. CON0 and CON1 are IPEX1 connectors on top side J1 is 2*23 pins 1.27mm female header on bottom side for signals J2 is 2*10 pins 1.27mm female header on bottom side for signals The mechanical drawing in .
PAGE 9
OWMH-DS6311-01 Product Specification Version:0.1 Date: 2018.11.14 FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).