Safety Notice

ManualsBrandsOrigin Wireless Taiwan ManualsElectronicsHex Sense

Welcome to the Hex family.

A simpler, smarter way to protect your home.

SAFETY NOTICES

• Use this product in environments with ambient temperatures between 0°C(32°F)

and 40°C(104°F). • Refer to the rating label on the bottom of your product and

ensure your power adapter complies with this rating. • DO NOT place on uneven or

unstable work surfaces. Seek servicing if the casing has been damaged. • DO NOT

place or drop objects on top and do not shove any foreign objects into the

product. • DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the

product during electrical storms. • DO NOT cover the vents on the product to

prevent the system from getting overheated. • DO NOT use damaged power cords,

accessories, or other peripherals. • If the Adapter is broken, do not try to fix it by

yourself. Contact a qualified service technician or your retailer. • To prevent

electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that

may cause undesired operation.

This device has been tested and found to comply with the limits for a class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This device generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this device does cause

interference to radio or television reception, which can be determined by turning

the device off and on, the user is encouraged to try to correct the interference

bone or more of the following measures:

• Reorient or relocate the device(s).

• Increase the separation between the device(s).

• Connect the equipment into an outlet on a circuit different from that to which the

receiver connected.

• Check the troubleshooting section for additional help.

WARNING! Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

Brand Name: Origin Wireless Taiwan Corporation

Model Name: Hex Sense

FCC ID: 2AW26TR-WIFISEN-X

PROHIBITION OF CO-LOCATION

This device and its antenna(s) must not be co-located or operating in conjunction

with any other antenna or transmitter.

WARNING! This device must be installed and operated in accordance with provided

instructions and the antenna(s) used for this transmitter must be installed to provide

a separation distance of at least 20 cm from all persons and must not be

co-located or operating in conjunction with any other antenna or transmitter.

PRIVACY & TERMS

Before using the Hex Home system, please read all applicable terms rule, policies

and usage provisions found in the Hex Home app in Privacy & Terms > Privacy

Policy, or > Terms of Use, and available at

(collectively, the “Agreements”)

By using your Hex Home system, you agree to be bound by the Agreements.

LIMITED WARRANTY

Your Hex Home System is covered by a Limited Warranty, detailed in the Hex Home

app in Privacy & Terms > Legal, and at myhexhome.com/policies/refund-policy

RECYCLING YOUR DEVICE PROPERLY

The disposal of certain electronic devices in regulated in some areas. Make sure

you dispose of or recycle your device in accordance with your local laws and

regulations.

OPERATING INSTRUCTIONS & TROUBLESHOOTING

For helps & tips, instructions, and FAQs, please visit myhexhome.com/faq

NEED MORE HELP?

Please reach out to us at any of the following options:

1-833-4MYHEX1

myhexhome.com/help

hello@myhexhome.com

Command, Hex Sense, all related logos and motion marks are trademarks of Origin Wireless, Inc. or

its affiliates. Origin Wireless, Inc. 7500 Greenway Center Drive, Greenbelt, MD 20770 USA.

SYSTEM & REQUIREMENTS

Hex Home is for indoor use only; the system is at its best performance when the

devices are on the same floor.

GETTING TO KNOW YOUR HEX DEVICES

Hex Sense

PRODUCT SPECIFICATIONS LIGHT INDICATORS

For detailed specs, please visit: myhexhome.com/faq

White Blinking Updating

Yellow Solid Motion detected light

Red Solid Communication error

Electrical Rating: 100V – 120V, 50/60Hz, 0.2A

Wireless: 802.11 a/n 1x1 5GHz, BLE 4.2

Temperature Rating: 0 - 40



Size: Ø55.7mm x 35.5mm

Weight: 61g

IMPORTANT TO KNOW:

When plugging in your Hex Sense into the outlet, make sure it looks like this:

Place the logo on the

bottom of the device,

towards the floor.

Use the top outlet

Light ring

Siren

Reset

button