Electric scooter Instruction Manual ESX3
1.
2.Assemble the vehicle 1. Put the handle bar set into 2. Fasten with the four screws (included). the big tube 3.Folding operation 1. How to unfold your scooter (4). Hold the tube with (1). Hold the handle one hand, lift and press the quick-release lever by another hand bar with one hand (2).push the folded hook with another hand (3). then lift the handlebar upward 2. How to fold up your scooter 1.Hold the tube with one hand. 2.Use your thumb and push down the red safety button 4.
.Display Operation Speed display Power display ON-OFF headlight Tail light 1. power on/ power off Operation (1) Press the button for 3 seconds to start up, the speed is displayed as 00, and the LED light is on. (2) Press the ON-OFF button again for 3 seconds to shut down. 2. Light operation (1) Touch the button lightly, the headlight and taillight will light up. Touch the button again, the headlight and taillight will turn off. (2) Press the brake lever, the taillight will flash 3.
.Get the APP 1. Installation and operation instructions of E-SCOOTER APP (1) Scanning below QR-code. (2) Enter the download web page and download the app.. (3) Install App-----FLSTools 2. App operation (1) open the app FLST00ls. (2) Click “connect” on the top right icon to get connected the bluetooth with your e -scooter. (3) After connection is successful, the mobile panel will display the Bluetooth name, display version and controller version. (4) Click unlock to unlock e-scooter.
.Riding Safety first When we ride, we need to wear protective devices such as helmet knee pads, elbow pads. Kick At the beginning of the ride, one foot is on the deck and another foot slightly kick the floor backward. Start freely Press the throttle to accelerate, press the brake to decelerate and stop. 7.Charging Connect the charger to the charging port.
Warning 1. Wear helmet, shoes, knee pads, wrist pads and strong protective clothing when riding. The maximum loading capacity is 120KG. 2. Do not ride in rain or wetlands 3. Do not drive on speed bumps or uneven ground at high speed 4. Do not drive on public roads or highways 5. Don't press the accelerator while walking 6. Slow down when turning 7. Do not use one scooter for two or more people at the same time 8. Do not ride up or down stairs. Do not store or expose to high temperature and humidity 9.
Input voltage 100-240AC Output voltage 42VDC Output current 2.0 amps Charger model: CP4220 (Coming Data Co., Ltd.) * shown in the range of the maximum range ˴ climbing ability data such as in the actual ride ˴ will be affected by the rider weight ˴ factors such as road ˴ will be less than or more than marked. Serial Number: This serial number will be your maintenance voucher, do not tear. Maintenance 1. Before cleaning the product, be sure to turn off the switch and disconnect the power supply. 2.
Use the only power supply be provided” Charge model: CP4220(Manufacturing: Coming Data Co., Ltd.) Caution: --Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction. --Disposal of the battery into fire or a hot oven or mechanically crushing or cutting of the battery that can result in an explosion.